Compare Quotes from up to 3 Pros

Heating & Furnace Contractors in Dallas, TX (Texas)


Deals Tag = Deals
Compare quotes with a single request

Let our ProFinder technology instantly match you to the perfect pros for your project.

Find the Right Pro. Right Away.

Let our ProFinder technology instantly match you to the perfect pros for your project.

Showing 51-75 of 105
< Prev | 1 | 2 | 3 | 4 | 5 | Next >

Dallas Heating Systems

North Texas can be quite the challenge for home cooling and heating systems. While taking a good force of Texas summers, the Big D still sees its fair share of winter conditions. They may not be anywhere near as harsh or as prolonged as the northern central plains states, but Dallas homeowners still need a quality heating system for both the comfort of their homes and a reasonable monthly utility bill. Traditional heating systems in Dallas may have been the best you could do when they were installed and still serving you well, this many years later, but eventually your system is going to fail, if it hasn't already. Knowing what your options are when the time comes is critical to making a wise decision for your home's immediate comfort and its long term well being.

Traditional Heating Systems
Radiators and boilers are truly old school when it comes to home heating. Ironically, most people agree they produce a much more comfortable, moisture-laden heat that won't dry out your skin or leave your toes cold and your face flushed. Still, reducing the cost of heating systems was the priority back then, and furnaces and forced air systems overtook these older systems, particularly in places like Dallas where home heating is still only used a few short months and doesn't need to be a luxurious installation for many homeowners.

These furnace and forced air heating systems remain the standard, but it's not a stretch to say they're on their way out as newer, more energy-efficient systems are already on the market and making noise. In fact, now is the time when a prudent homeowner might start looking into these new systems. If your furnace does go out but requires only a small fix, by all means, spend a hundred dollars or two to get it up and running. Beware, however, that your furnace may be getting to the point where it needs to be replaced. Newer model furnaces are substantially more energy-efficient than units of 20, 10, or even five years ago. This is never a bad idea, especially since you probably won't need a high-capacity furnace to combat frequent sub-freezing temperatures. An even better idea, however, is to talk to a Dallas heating system contractor about some of these heating alternatives.

Alternative Heating Systems
The most promising heating system in Dallas is probably a heat pump. Heat pumps work by exchanging for warm and cold air particles between your home and the outside air. They are extremely energy-efficient and don't cost as much to install as other energy-efficient systems. The one drawback is that they may not be the most reliable heating unit, especially during extremely cold spells.

Hydronic heating, or radiant floor heating, systems essentially replace the traditional boiler/radiator heating systems. You'll still need some type of primary heat source, but hydronic systems use the power and efficiency of radiant heat to minimize heat loss, providing an extremely comfortable and energy-efficient home heating system. The cost effectiveness of this system really depends on the nature of your flooring and how easy it will be to install the necessary tubing for such a system.

Geothermal heat pumps and solar panels are two alternative Dallas heating systems. Both require large initial investments for long-term benefits. The upside to these types of systems is that they can be used for heating and cooling, generally give substantial tax credits, and comprehensive systems can eliminate monthly energy bills altogether.

Installation and Cost
Naturally, installing a heating system can mean a number of different things. You may have one of the few homes left that doesn't have central heating. It may be time to replace your duct system with new ductwork or a ductless system. More commonly, you may be looking to install a furnace, boiler, or alternate heating source for your heating system. You'll need to talk to a Dallas HVAC professional to get any kind of specific estimate, but here are some loose averages as reported to us from other Dallas/Ft. Worth homeowners:

New Ducts & Vents: $1,500 (varies depending on size/length) New Furnace: $1,000-$5,000 (depending on capacity and efficiency ratings) Radiant Floor Heating Systems: $3,000 (average)

Note: For heat pumps, you're going to need to do some homework, as the cost of a heat pump varies exponentially ($1,000-$10,000) depending on heating and cooling capacities. Your best idea is to simply talk to a contractor. If you only need a basic heat pump for your heating purposes, there's a good chance you can find a model that is comparable, or even cheaper than, replacing your furnace or boiler.

Recent Job Requests for Heating & Furnace Systems Contractors in Dallas, TX


New Lead
Project: Install or Replace Ductwork
Location: Dallas, TX
Date: 07/27/2016
Request Stage: Ready to Hire
Desired Completion Date: Timing is flexible
What kind of location is this?: Home/Residence
Comment: I need an estimate on air ducts relocated.

New Lead
Project: Install or Replace Ductwork
Location: Dallas, TX
Date: 07/27/2016
Type of Ductwork Project: Replace existing ductwork
Type of System: Electric-fired forced air (central heating)
Number of rooms/areas needing registers: 2 - 5
Request Stage: Ready to Hire
Desired Completion Date: Timing is flexible
What kind of location is this?: Home/Residence
Property Owner: Yes

New Lead
Project: Repair Natural Gas or Propane Furnace / Forced Air Heating System
Location: Dallas, TX
Date: 07/26/2016
Current Heating System: Natural gas fired
What kind of location is this?: Home/Residence
Is this an emergency?: No
Problem with Heating System: Annual/Preventative Maintenance
Age of Heating Equipment: 11 - 15 years
Request Stage: Ready to Hire
Desired Completion Date: Timing is flexible
After Business Hours: No
Covered by Insurance: No
Property Owner: Yes
Comment: I would like an estimate for csst bonding wire that connects to the furnace. I need it installed and on the water heater gas line

New Lead
Project: Install or Replace a Heat Pump
Location: Dallas, TX
Date: 07/25/2016
Request Stage: Ready to Hire
Desired Completion Date: More than 2 weeks
What kind of location is this?: Home/Residence
Property Owner: Yes

New Lead
Project: Install or Replace a Heat Pump
Location: Dallas, TX
Date: 07/25/2016
Request Stage: Ready to Hire
Desired Completion Date: More than 2 weeks
What kind of location is this?: Home/Residence
Property Owner: Yes

New Lead
Project: Install or Replace Ductwork
Location: Dallas, TX
Date: 07/22/2016
Type of Ductwork Project: Install new ductwork
Type of System: Air conditioner
Number of rooms/areas needing registers: 2 - 5
Request Stage: Ready to Hire
Desired Completion Date: Within 1 week
What kind of location is this?: Home/Residence
Property Owner: No
Comment: Running two new ducts one into each bathroom, supplies are already at the job site. One duct run is going to be tight

Project: Install or Replace Ductwork
Location: Dallas, TX
Date: 07/21/2016
Type of Ductwork Project: Repair existing ductwork
Type of System: Electric-fired forced air (central heating), Air conditioner
Request Stage: Ready to Hire
Desired Completion Date: Within 1 week
What kind of location is this?: Home/Residence

Project: Install or Replace Ductwork
Location: Dallas, TX
Date: 07/19/2016
Type of Ductwork Project: Repair existing ductwork
Type of System: Electric-fired forced air (central heating)
Request Stage: Planning & Budgeting
Desired Completion Date: Timing is flexible
What kind of location is this?: Home/Residence
Comment: Existing A/C ducts leak and need to be re-wrapped.

Project: Install Natural Gas or Propane Furnace / Forced Air Heating System
Location: Dallas, TX
Date: 07/18/2016
Kind of Heating System: Natural gas fired
What kind of location is this?: Home/Residence
Nature of Project: Replace existing central heating system
Age of Heating Equipment: Don't Know
Request Stage: Ready to Hire
Desired Completion Date: More than 2 weeks
Property Owner: Yes

Project: Install or Replace a Thermostat
Location: Dallas, TX
Date: 07/18/2016
Type of thermostat: Electronic, programmable model
Heating System Type: Furnace
Number of zones: 1
Thermostat location: On the unit
Request Stage: Ready to Hire
Desired Completion Date: Within 1 week
What kind of location is this?: Home/Residence
After Business Hours: No
Materials Provided by Homeowner: Yes
Property Owner: Yes
Comment: Honeywell 7-Day Programmable Touchscreen Thermostat purchased and needs to be installed.

Unscreened Heating & Furnace Systems Contractors in Dallas

Henry's AC Service

Dallas, TX 75202
VR HOME SOLUTION
11227 goodnight
Dallas, TX 75225
Prisma Air Conditioning and Heating
8500 N. Stemmons Frwy Ste. 5030 B
Dallas, TX 75247
Millennium Choice Co.
8204 Elmbrook Suite 106
Dallas, TX 75247
A#1 Air

Dallas, TX 75214
Texas Air Zone

Dallas, TX 75214
Affordable's Air Depot

Dallas, TX 75214

References Available
Tell us your zip code to view pricing & schedule
Tell us your location to view pricing & schedule
Choose your project to view pricing & schedule

Please enter valid zip.

Please choose a location.

We're sorry but the time you have chosen is no longer available.
Please select a new time below:
does not provide service to View pros who serve this zip
There was an issue connecting to the server. Please try again or call Customer Service at 1-877-800-3177.
We're sorry but the time you have chosen is no longer available.
Please select a new time below:

Select your appointment type and time:

Final Step - Confirm Your Appointment:

Confirm your appointment with on , - Change


Required
 
Required
Required
Required
Required