Draftsperson / CADD Pros in Tucson, AZ (Arizona)
Find Tucson Draftsperson/CADD Pros
Find Trusted Pros with HomeAdvisor ProFinder
Just tell us about your needs and we'll quickly match you to the pre-screened, Tucson Draftsperson / CADD Pros you can trust to get the job done.
Start Now
Prescreened Draftsperson / CADD Pros in Tucson, AZ
John Riggs, AIA
(520) 917-1412
1344 East Renfrew Place
Tucson, AZ 85719
1344 East Renfrew Place
Tucson, AZ 85719
Are You a Home Improvement Professional?
Learn how we can help your businessSee recent jobs & leads
Reviews of Tucson Draftsperson / CADD Pros
Project: Draftsperson or CADD Expert (Non-Designer)
Tucson, AZ
Tucson, AZ
We have had several changes to our original design. John has made these changes cheerfully and professionally without charging us anything for the changes. I would recommend him most hightly.
Project: Draftsperson or CADD Expert (Non-Designer)
Tucson, AZ
Tucson, AZ
We have had several changes to our original design. John has made these changes cheerfully and professionally without charging us anything for the changes. I would recommend him most hightly.
Project: Hire an Architect to Design a Project
Amado, AZ
Amado, AZ
Throughout the design and building process so far, John has always been friendly and available to discuss the project. His written estimate of the time the project stages would take was very accurate. He has a good network in our area, and has helped us meet Pima County's building requirements. John offered to continue to provide assistance in the building phase. I made a number of scope changes during the design work, and John flexed to explore options. I should have asked him for more guidance on cost management, and there were a couple of final design challenges we worked through together, but I would not hesitate to hire him again.
Related Projects in Tucson, Arizona
More Tucson Architects & Engineers ContractorsMore Arizona Architects & Engineers Contractors
Unscreened Architects & Engineers in Tucson, Arizona
Things to Consider Before You Draftsperson or CADD Expert (Non-Designer) in Tucson, Arizona:
- What kind of project is this?
- What type of design preparation has been done? (Check all that apply)
Cutouts/photos
Sketches
Blueprints that need alteration
Purchased plans that need modification
Permits pulled
Other
- Does the development have Covenants, Codes and Restrictions (CC&R) that must be followed?
- Do any of the following issues need to be considered? (Check all that apply)
Zoning variance needed
Environmental concerns
Steep Slope
Other
Don't Know
No
Ideas & Inspiration from Tucson Architects & Engineers
Cote Residence - a custom home with an ICF (insulated concrete form) exterior wall system made of "Rastra" blocks, and ...
Cote Residence - Continued ...
Home Inspection ...
Recent Job Requests for Draftsperson or CADD Expert (Non-Designer) Contractors in Tucson, Arizona:
Project Location:
Tucson,
AZ
85711
Date: 03/2013
Type of Project: Need drawings of existing building
Design Preparation: Purchased plans that need modification
Neighborhood covenants: Yes
Other Issues: No
What kind of location is this?: Home/Residence
Desired Completion Date: Timing is flexible
Request Stage: Ready to Hire
Project Location:
Tucson,
AZ
85742
Date: 03/2013
Type of Project: Home remodel
Design Preparation: Blueprints that need alteration
Design Preparation: Permits pulled
Neighborhood covenants: Yes
What kind of location is this?: Home/Residence
Desired Completion Date: Within 1 week
Request Stage: Ready to Hire
Comment: Home and wall prodject
Project Location:
Tucson,
AZ
85743
Date: 11/2012
Type of Project: New custom home
Design Preparation: Purchased plans that need modification
Neighborhood covenants: Don't Know
Other Issues: Don't Know
What kind of location is this?: Home/Residence
Desired Completion Date: Within 1 week
Request Stage: Planning & Budgeting
Property Owner: Yes
Comment: I have house plans, but need electrical and mech plans. also need existing plans to be reviewed to be sure they meet local tucson requirements for building permits.
Project Location:
Tucson,
AZ
85718
Date: 10/2012
Type of Project: New custom home
Design Preparation: Blueprints that need alteration
Neighborhood covenants: No
Other Issues: No
What kind of location is this?: Home/Residence
Desired Completion Date: Within 1 week
Request Stage: Ready to Hire
Project Location:
Tucson,
AZ
85719
Date: 10/2012
What kind of location is this?: Home/Residence
Financing Requested: No
Desired Completion Date: Timing is flexible
Request Stage: Planning & Budgeting
Comment: want to find out if wall is load bearing and if we can take it out to open up floor plan
Project Location:
Tucson,
AZ
85737
Date: 10/2012
Type of Project: Home addition
Design Preparation: Sketches
Neighborhood covenants: No
Other Issues: No
What kind of location is this?: Home/Residence
Desired Completion Date: Timing is flexible
Request Stage: Planning & Budgeting
Comment: Home addition and free standing garage. No setback issues. Need site plan and building plans HVAC extension from existing in attic and electrical
Project Location:
Tucson,
AZ
85714
Date: 08/2012
Type of Project: Other
Design Preparation: Other
Neighborhood covenants: Yes
Other Issues: No
What kind of location is this?: Business
Desired Completion Date: Within 1 week
Request Stage: Ready to Hire
Comment: site plan for a pedler
Project Location:
Tucson,
AZ
85750
Date: 07/2012
Type of Project: New drawings converted to CADD software
Design Preparation: Cutouts/photos
Design Preparation: Other
Design Preparation: Sketches
Neighborhood covenants: No
Other Issues: No
What kind of location is this?: Business
Desired Completion Date: Within 1 week
Request Stage: Planning & Budgeting
Comment: We require a draftsperson on an as needed basis to assist in measuring Mining Ball Mill Liners -Shells-inside and out-as well as the existing liners being used to compile a pattern drawings which can be converted to a CAD drawing. This opportunity would be available often for 2-3 days at a time(or longer) and would require all PPE gear, as well as ability to work with a 2-3 week notice. The area would for now be, 100 miles perimeter of Tucson-mines are Asarco-Hayden-Ray-Mission N&S. Please reply with your per diem of weekly rates.
Project Location:
Tucson,
AZ
85716
Date: 07/2012
Type of Project: Need drawings of existing building
Neighborhood covenants: No
Other Issues: No
What kind of location is this?: Home/Residence
Desired Completion Date: More than 2 weeks
Request Stage: Ready to Hire
Property Owner: Yes
Comment: My home was damaged by a fire. The kitchen has to be replaced completely and adjacent areas/rooms need finish work like drywall, fixtures, etc. There is no structural damage but I will need electrical and HVAC plans. I have a plot plan. The initial clean-up and demo has been done so elect, mechanical and plumbing are exposed. I also need to have the permits pulled .
Project Location:
Tucson,
AZ
85749
Date: 06/2012
What kind of location is this?: Home/Residence
Desired Completion Date: 1 - 2 weeks
Request Stage: Planning & Budgeting
Project Location:
Tucson,
AZ
85711
Date: 05/20/2012
What kind of location is this?: Home/Residence
Desired Completion Date: Within 1 week
Request Stage: Ready to Hire
Property Owner: Yes
Comment: I already have current plans for my house but a few things need to be changed.
Project Location:
Tucson,
AZ
85705
Date: 04/2012
Type of Project: Home addition
Design Preparation: Other
Neighborhood covenants: Don't Know
What kind of location is this?: Home/Residence
Desired Completion Date: Timing is flexible
Request Stage: Planning & Budgeting
Comment: enclose a car port
Project Location:
Tucson,
AZ
85719
Date: 04/2012
Type of Project: Home addition
Neighborhood covenants: No
What kind of location is this?: Home/Residence
Desired Completion Date: Within 1 week
Request Stage: Ready to Hire