How much will your project cost? Get Estimates Now

How Much Does It Cost To Install Or Replace An Interior Door?

Typical Range: $362 - $1,130

Find out how much your project will cost.

Are you a Home Improvement or Service Pro?

Connect with Homeowners

March 6, 2021

Reviewed by Robert Tschudi, Home Building & Remodeling Expert.
Written by HomeAdvisor.

Interior Door Installation Costs

The total cost to install an interior door averages $734, or between $362 and $1,130. A bedroom or closet door replacement averages $100 to $300 in labor with door costs typically range from $50 to $500. Wood French doors can cost from $600 to $4,500 or more.

Interior doors serve a variety of important purposes including room division, privacy, noise reduction and even fire safety. In addition, attractive and well-placed varieties can enhance the décor of your home without much fuss during installation.

Interior Door Cost Calculator

Let's calculate cost data for you. Where are you located?

Please enter a valid ZIP Code
National Average $734
Typical Range $362 - $1,130
Low End - High End $150 - $2,200

Want the most accurate estimates for your project?

Request Quotes

We are still gathering data for this location.

Want the most accurate estimates for your project?

Request Quotes
Cost data is based on actual project costs as reported by 3,565 HomeAdvisor members in .
the average cost to install an interior door is $750 or $150 to $2,000.

Whether you are replacing the old or broken, or upgrading to premium models , there are several important choices to make regarding style and function. You’ll need to choose from simple pre-hung varieties for closets to elaborate custom wood French styles. Installation pricing varies according to the style as well as framing, sizing, and customization.

Hire a professional door installer for best results. Improper installation can result in sticking, uneven gaps at the top and bottom, or the door not fully closing, all of which run the risk of higher replacement and repair costs.

New Interior Door Prices

Interior doors range from hollow core slab types starting at $30 up to $4,500 or more for wood and glass French varieties.

Given the low rates for labor, remaining in budget usually has more to do with the price of the door than any other factor. All styles come in a variety of materials, qualities, and designs. Most notably are hollow vs. solid and made of either composite or premium wood.

Hollow vs. Solid Core Composite Doors

Prehung TypeCost Up to 80 by 36 inches

Hollow core is the cheapest type ranging from $30 to $400 each, though most pay in the range of $50 to $150. These typically have a honeycomb of cardboard slats with thin wood veneer faces. These are good in areas where sound transfer isn’t a problem, like a closet or pantry.

Solid core ranges from $70 to $250 with higher-end models costing $500 or more. This style is typically made from wood particles and glue or foam. They tend to be an excellent choice for private rooms, such as bedrooms, bathrooms, home theaters or offices. "Solid Core" is not to be confused with solid wood.

Solid Wood

Solid wood types come in a variety of styles, as slab or pre-hung and often with glass inserts. Premium pre-hung wood runs between $150 to $1,000 or more though most fall in the $250 to $600 range.

Single Solid Wood Door Prices
TypeSlabFrameDoor Total*
Red Oak & Ash$165 - $325$75 - $95$240 - $420
Maple$180 - $375$85 - $110$265 - $485
Paint & Stain Grade Poplar and Maple$100 - $250$60 - $90$160 - $340
Cypress, American & Brazilian Cherry, Mahogany, Clear Pines, Birch, Cedar & Walnut$250 - $450$105 - $140$355 - $590

*Costs for door only (no hardware or labor) for a standard single door at 1 3/8-inch thickness, 80 inches high and between 24 and 36 inches wide.


Most aluminum interior doors, typically sliding or bifold types for wardrobes, cost $300 to $2,000. Aluminum provides a high-end modern finish to your home.

Glass and Other Accents

Accents such as the number and design of the panels, the finishing and paint, any carved wood features, and any glass inserts all increase prices, regardless of the type. For example, composite bifold with hollow cores sell for as low as $30 each. However, more ornate, glass-accented, solid bifold models retail for more than $500 each.

Where to Buy Interior Doors

Buying new is as simple as heading down to a local home improvement warehouse or neighborhood hardware store. These retailers offer several styles from popular names such as:

  • JELD-WEN: Available in a wide array of styles and in most big box home improvement stores.
  • Masonite: One of the top five manufacturers creates an extremely wide range of door types and styles in MDF and wood.
  • Sarto: Italian door company specializing in modern luxury designs.
  • Anderson: Doing more than just windows, they create mid to higher-end doors in both contemporary and modern styles.
  • Pella: Also known for windows, Pella specializes in mid to high-end exterior models including wood, fiberglass and steel. They offer patio and entry doors.

Homeowners who want to achieve a more unique look in their homes may opt for custom cuts and styles. Whether you want French with carved glass, slab with detailed carvings, or ones made from a rare wood, obtaining a custom design by a carpenter or other local craftsman allows you complete creative freedom. Other specialty installation services may use advanced technology such as computerized measuring tools to design and laser-cut for an exact fit, saving you time during installation.

Get a Quote from Local Interior Door Pros

Adding Pre-Hung Interior Doors

Pre-hung interior doors come complete with a casing that fits into the space where the previous one stood, and these sets range from $60 to $1000 or more, depending on the chosen material and accents.

In addition to the material prices, budget for the labor costs. Labor rates for this type of installation vary according to size:

Cost of a Pre-Hung Door by Size
Type & Size (inches)MaterialsInstalled Price
Standard (up to 80"x36")$30 - $250$150 - $700
Extra-large (over 80"x36")$100 - $1,000$220 - $1,450
Double (80"x60" or wider)$300 - $4,000$420 - $4,450

Homeowners may increase the price of their installation with add-on services such as:

  • Reframing and resizing the opening: $40 to $75 per hour or more. May also require drywall work for $1.50 per square foot and electrical work at $75 to $100 per hour.
  • Lock installation: $135 to $200 plus the price of the locks. Most locks run between $30 and $200, with those for the interior falling on the lower end of that spectrum.
  • Trim installation: $2 to $3 per linear foot for standard. Higher-end styles may increase the price slightly due to material choices.

Labor Cost to Install Interior Door, Frame & Trim

Labor runs between $40 and $90 per hour with an average rate of $70 per hour though it varies by location. It takes an average of 3 to 5 hours for most installations. Rather than using pre-hung, creating a frame for a slab style on-site is another option. For odd shapes and reframing, it’s a better solution.

Slab Door

A slab runs anywhere from $50 to $400 on average. It refers to the door without the frame or any hardware. It can come predrilled but typically needs drilling for the knobs and hinges.


A door frame averages from $150 to $300. This does not include the rough frame, or the 2x4" posts that make up the structure of the wall. Instead, this is the casement that covers the rough frame, provides a place to secure the hinges and latch, and includes the door stop.


Trim costs $2 to $3 per linear foot. Trim is the boards that cover the gap between the frame and drywall to give the opening a finished look.

Hinges & Hardware

Hinges run about $2.50 each with designer hardware exceeding $10. Locks and knobs run anywhere from $20 to $200 for keyed and coded locks though interior doors only require basic knobs in the $20 to $40 range.

Talk to an Interior Door Pro Near You

Average Cost to Hang an Internal Door by Type

Internal doors run an average of $750 with a range of $150 to $2,000 including materials, labor and equipment. Located throughout the home, distinct types all serve unique purposes and offer specific design and functional benefits. The type that homeowners choose for an area and the materials used during manufacturing and installation all have a direct impact on the final price of this project.

Door Material Price by Type
Pocket$140 - $1,000
French$200 - $4,000
Sliding$400 - $4,500
Bifold$35 - $70
Barn$150 - $4,000
Saloon$100 - $500
Murphy$700 - $2,500

Pocket Doors

Pocket door installation on a new build or addition averages between $140 to $180. Installing in an existing room will run homeowners $600 to $1,000 or more.

This style is another popular addition for a closet or other tight space, and it has an even lower profile than a bifold model. Sliding into a hollow area of the wall along tracks installed on either end, pocket styles are much easier to add to an addition, remodel, or new construction, as they require the walls to be opened and free of wires and pipes. Installation costs for each of the unique styles vary.

French Doors

Priced based on the intricacy of the glass panels as well as the quality of the wood used in their construction, basic interior French styles may cost as little as $200 a piece or as much as $4,000 or more. Installation costs are usually no different than those for pre-hung styles because they operate on the same frame-and-hinge design.

French refers to any unit, whether interior or exterior, with windows that extend throughout the whole frame. The windows may be continuous or broken into separate panes. They are also usually, though not exclusively, found in pairs like with many patio doors costing an average of $2,500.


Sliding glass doors cost between $400 and $4,500 with the average homeowner paying $1,850. Though most are used as an exterior entry to a patio or deck, they make great additions inside the home to physically separate spaces while keeping a visually open concept.

Single & Double Bifold Doors

Single bifold doors cost between $35 to $60 while a double bifold averages $45 to $70. They come in single and double designs depending on the size of the opening that they conceal. They are purchased individually for $30 to $500 or more, depending on style and material. Prices for installation vary depending on the type needed.

Often found concealing closets or small workspaces such as a washer/dryer area, bifolds consist of two or more hinged panels running on a set of tracks embedded in the casing. Folding in half when opened, they offer a less obtrusive opening design than standard swinging designs.

Barn Doors

In existing rooms, homeowners may consider the value of a barn or sliding door instead, which rides along rails on the exterior of the wall. Barn doors cost anywhere from $150 to $4,000. The biggest variables are the material, number you'd like installed and labor. If you are replacing a traditional door and frame, the newly exposed structure behind the trim will need to be finished, adding drywall prep and painting costs to your project total.

For materials, wood is the most common choice. It takes stain or paint to match existing trim or woodwork in your home. You can also find more modern styles and materials such as composites or colored glass. Barn styles have become increasingly popular and may increase your home's value to more than 10% above asking price.

While you might be able to do-it-yourself, consider hiring a handyman or installation professional to make sure that the track is securely fastened without interfering with anything on the wall. Most also have a fixed guide on the floor for added safety.


The material used to construct a set of saloon doors, the thickness of that material, and the intricacy of the design affect the ultimate price of this uncommon option. Basic slatted sets retail for around $100 to $150, whereas more detailed, solid, or glass-accented pairs run $500 or more, especially if custom elements such as carved designs, raised panels, or iron accents are included. Installation usually costs $50 to $250.

Saloon, also known as swinging café, are a set of double doors that use a special type of opening hardware known as a pivot hinge. This hinge allows them to swing both in and out, making them popular for kitchens and dining areas where people are likely to travel in both directions frequently.

Murphy Door

Murphy doors range cost anywhere from $700 to $2,500 depending on the size. These are the "hidden bookcase" style. It’s essentially a solid core bookcase that swings in a frame the same as a standard door. It provides useable storage space while concealing the entry to another room.

Learn More. Call Door Pros Near You.

Best Doors by Room

The use of space in your home dictates the best type to install. When choosing which to use, ask yourself what you’ll use the space for and what visual and auditory privacy you’ll want.

Bedroom & Bathroom Door Cost

Use a solid core for bedrooms and bathrooms to reduce noise and improve privacy. They’ll cost slightly more than a hollow core variety by about $50 to $200. Solid wood is also an option but using a solid core foam style will absorb the largest amount of sound.


Closet doors require no privacy. In most cases, you’ll only need a hollow core. Depending on the size of the room, a single may work if there is floor space for opening it. For smaller rooms without much floor space, a bifold or sliding type may be a better fit but will generally run twice as much.

Apartment or Indoor Garage

Apartments and garage doors are usually fire-rated steel for an average cost of $150 to $300 or more. Complete installation usually increases the price to $400 to $1,300. Most of these varieties, though used internally, are exterior entry types without the need for weatherproofing.

Cost to Replace Interior Doors

When replacing a door, you not only have the replacement and framing costs but also removal and disposal fees. It will take an additional hour of labor for the project for an average of $50. Most disposal fees vary by location and are on the lower end, usually an additional $25 to $50. If you’re old doors are undamaged, consider donating them for a tax deduction or negotiating with the contractor for a reduction in installation pricing.

Cost of Replacing a Door Frame & Trim

Frames cost about $250 for an installation with an additional $2 to $3 per linear foot for trim. This is only a 2 to 3-hour project for an experienced finish carpenter.

Knobs and Hinges

Besides the $10 to $150 you’ll spend on the hardware itself, the job will take about an hour or at least $50 in labor. More likely, a contractor or locksmith will charge a minimal fee for the first hour or travel. Either way expect to pay an additional $75 to $150.

Get Your Interior Door Installed Today.

Maintenance & Common Repairs

Average door repairs cost $220. Frame repair can be a simple fix with some paint or require partial removal and replacement. Keeping a door looking its best usually means performing basic maintenance and repairs throughout its life.

These jobs include projects as simple as greasing the hinges with products such as WD-40 or installing stops to keep walls safe. In addition, repainting gives them an updated look and adds value and interest to your home. For example, pre-primed varieties are easy to update with coordinating paint colors that bring a room together.

Hollow Core Repairs vs. Replacement

One frequent problem that homeowners encounter when they opt for hollow core styles is important to note. Although they are much less expensive than solid wood, the cost savings may not last.

As the name indicates, their hollow nature makes them susceptible to damage and holes caused by everything from slamming to angry fists to poorly judged clearances when moving furniture. Sometimes it is possible to patch the smaller holes that appear. However, replacement is more often ideal for the sake of durability.

DIY vs. Hiring Contractors

It’s almost always a good idea to hire a contractor. Doors may seem easy, but there are many pitfalls to the installation.

DIY Considerations

Installing a door where one is already located is a straightforward home improvement project suited for the intermediate to advanced DIYer. Properly done, this project should take 2 to 3 hours for a pre-hung type and about 5 to 6 hours for a slab variety. Plan on it being a longer project if this is your first attempt.

If this is your first project, it would be best to hire a pro and learn from them. If you’re looking to save money on labor and have multiple doors to install, hire a professional to assist you with the first. Installation, while it may seem easy, requires a high level of skill, attention to detail and patience. Learning from a professional is the best way to learn for future DIY installations.

Aside from the need for a basic toolbox and power tools such as a miter saw and drill, this project is rather affordable. The only materials needed aside from the door and its hardware cost less than $25.

Avoid some common DIY pitfalls, including:

  • Uneven framing: Leads to improper closure. In extreme cases, it won’t close at all, requiring a complete reinstall.
  • Ruined trim: Miter cuts on trim and incorrect measurements ruin trim. Having a professional finish carpenter install the finishing touches leaves a professional looking door. Trim installation only runs $2 - $3 per linear foot with a total of $40 to $60 per door including materials and labor.
  • Won’t latch: Not leveling the floor or frame prior to installation can lead to unmatched latch and hole placement. This requires re-drilling the holes or releveling the framing. Reframing runs $250 or more plus you lose the investment in your initial framing job.

Benefits of Hiring A Pro

In most cases, hiring a professional is the better solution. The labor costs only end up being in the $100 to $300 range and if you have multiple doors, expect to be closer to the $100 to $150 per door. And it can easily pay off. You’ll have doors that are well balanced, swing evenly and latch properly. A professional will also be able to spot any problems in the rough framing or the need for electrical work in the case of new installations.


How much does it cost to replace or move an inside door?

Replacing or moving an interior door can run anywhere from $150 to $2,000 or more. It depends on your location, the type, materials needed, and whether it is simply being replaced or moved. Moving one requires walling up the leftover space.

How much is it to remove or close up a door in a wall?

Wall installation costs to close up a door run $300 and $800. It includes framing, drywall and painting. Removing and leaving an empty space may only cost $150 to $250 for a new casement.

How much does it cost to install doors to the outside?

Exterior door installation costs an average of $950 with a typical range of $500 to $1,500.

Find the Best Interior Door Installers Near You
Was this page helpful?

Was this page helpful?

How could this page be more helpful?

How do we get this data?

  1. Homeowners visit to find a top-rated pro to complete their home improvement project or repair.

  2. Once their projects are completed, the members log in to their accounts and complete a short cost survey.

  3. After compiling and organizing the data, we report it back to you.