How Much Does Weatherstripping Cost in 2025?
Weatherstripping installation costs an average of $283
On average, installing weatherstripping costs between$131 and $436, averaging $283.
Factors such as location, project size, and material choice can impact final costs.
Proper seals help reduce drafts, lower energy bills, and maintain indoor comfort.
Installing new weatherstripping regularly ensures long-term energy efficiency.
This article was updated using automation technology and thoroughly reviewed for accuracy by HomeAdvisor Editor Ryan Noonan.
Weatherstripping keeps conditioned air where it belongs and trims monthly utility bills. Most homeowners spend $131 and $436 on weatherstripping costs, or $283 on average. Your price depends on how many openings you’re sealing, the type of weatherstripping you choose, and how often you replace worn strips. Plan ahead—and consider calling in a pro—to lock in the best long-term value.
Weatherstripping Cost Factors
How much you’ll spend on installing weatherstripping on your windows and doors depends on a variety of factors. Here’s a closer look at how your costs break down.
Length
On average, weatherstripping costs $0.10 to $4 per linear foot, with $0.50 per linear foot as the average. Here’s a look at how much various window weatherstripping projects cost based on length.
| Linear Feet | Number of Windows | Average Cost |
|---|---|---|
| 15 | 1 | $3.75–$11.25 |
| 30 | 2 | $7.50–$22.50 |
| 60 | 4 | $15–$45 |
| 120 | 8 | $30–$90 |
Labor
Most of your weatherstripping costs go to professional labor. Budget 80% of your project costs to go toward labor for hiring a handyperson for the job. This number varies depending on the type of weatherstripping you choose, as some types are more complicated to install than others.
Weatherstripping Cost by Type
Homeowners have several material options, each priced for its performance and lifespan. Felt is the budget pick, while magnetic strips can reach $20.50 per linear foot on the high end.
| Type of Weatherstripping | Average Cost per Linear Foot |
|---|---|
| Tapes | $1.47 |
| V-strips | $0.25 |
| Gaskets | $0.60 |
| Door sweeps | $10 |
| Magnetic | $20.50 |
| Felt | $0.10 |
| Fin seal | $0.20 |
| Tubular | $0.35 |
Tapes
Weatherstripping tape, priced at an average of $1.47 per linear foot, is an affordable option that is ideal for sealing irregular gaps around door jambs, window sashes, and door bottoms. It provides a strong sealant that is effective against wind, though it has some drawbacks, including low durability, high visibility, and the emission of greenhouse gases. This tape is easy to cut to size using scissors or a utility knife, and most varieties are self-adhesive, making the application straightforward. For the best results, ensure that surfaces are clean before application.
V-Strips
V-strips cost $0.25 per linear foot and slip neatly along double-hung window jambs and door stops. The thin metal or vinyl flexes to fill the gap, creating a tight, low-profile seal that lasts for years. Installation takes patience—especially with vinyl versions—but the payoff is durability and virtually invisible results.
Gaskets
Gaskets cost $0.60 per linear foot and stick to doorstops, window stops, and sash frames. They’re self-adhesive and simple to trim to length, making them a fast DIY fix. Just note they sit in plain sight, so choose a color that blends with your trim.
Door Sweeps
Door sweeps run $10 each and mount to the bottom edge of interior or exterior doors. The adjustable strip blocks under-door drafts and even cuts down on carpet drag. They’re one of the pricier options per foot, but the airtight seal often justifies the extra few dollars.
Magnetic
Magnetic strips top the price chart at $20.50 per linear foot, but they deliver an unmatched airtight seal for doors, double-hung windows, and sliding sashes. The magnetic edge snaps into place along the jamb, stopping drafts cold. If energy savings are your priority, this premium option can pay back over time.
Felt
Felt costs just $0.10 per linear foot and cuts easily with scissors, so it’s a quick fix for door jambs. Keep expectations low: the material wears fast, absorbs moisture, and is hard to hide. If you only need a temporary seal—say, ahead of winter—felt is a budget-friendly stopgap.
Fin Seal
Fin-seal strips run $0.20 per linear foot and shine on sliding doors and windows. The carpet-like pile, reinforced by a center fin, stands up well to daily glides but takes careful installation. If you want longevity without paying magnetic-strip prices, fin-seal is a smart middle ground.
Cost of Weatherstripping on Doors vs. Windows
Expect to pay more to seal a sprawling patio door than a standard interior slab. Material choice and door size drive most of the difference. Hiring a local door repair or handyperson service costs an average of $150 in labor for several openings, but your final bill rises if the hinges are tricky or thresholds need adjustment.
Adding weatherstripping to windows ensures a proper seal, preventing air or heat from escaping your home. Only windows that open and close require weatherstripping. Installers often price per window and may offer better rates when servicing multiple windows simultaneously.
Budgeting for Weatherstripping Installation
Consider these cost-saving tips to make your weatherstripping project more wallet-friendly:
Choose the proper weatherstripping for your project. While it’s tempting to choose the least expensive option, your costs will increase if you end up replacing it quickly. It’s a better investment in the long term if you choose a product that provides the proper protection for your situation.
Replace weatherstripping all at once. Most pros will offer deals if you’re doing a larger-scale project, like weatherstripping all of your windows in one visit. It also cuts down on minimum call-out fees and travel time, which can save you money.
Get multiple quotes. Contact at least three local handypersons for detailed quotes to ensure competitive pricing.
DIY vs. Hiring a Weatherstripping Installer
Installing basic felt or foam strips is a solid weekend project, but tougher materials—like automatic door sweeps—reward professional precision. A seasoned local door and window pro can seal multiple openings in one visit, spot hidden gaps, and save you the cost of fixing mis-cuts down the road.
How HomeAdvisor Gets Its Cost Data
No place is more important than your home, which is why HomeAdvisor connects homeowners with local pros to transform their houses into homes they love. To help homeowners prepare for their next project, HomeAdvisor provides readers with accurate cost data and follows strict editorial guidelines. After a project is complete, we survey real customers about the costs to develop the pricing data you see, so you can make the best decisions for you and your home. We pair this data with research from reputable sources, including the U.S. Bureau of Labor Statistics, academic journals, market studies, and interviews with industry experts—all to ensure our prices reflect real-world projects.
Frequently Asked Questions
Yes—sealing every operable door and window gives you the best defense against drafts, insects, and wasted energy. Gaps add up, so weatherstripping the full lineup of doors and windows in your home keeps conditioned air inside and pests outside. A whole-home approach can trim utility bills and make each room more comfortable year-round.
Swap out worn strips as soon as you spot cracking, gaps, or daylight around the seal. Taking a small sample to the hardware store helps you match the profile and size. A quick check each spring and fall keeps minor wear from turning into full-blown drafts and preserves your energy savings.
The lifespan hinges on both material and traffic. Expect to change the main-entrance foam or felt every two to three years, swap V-strips every five years, and maintain interlocking metal for decades with an occasional tune-up or repair of a small section. A quick annual inspection catches wear early and keeps your home draft-free and efficient.
Start by closing each door or window and feeling along the edges for drafts or visible light. Check seams, corners, and any spots where strips pull away. When a section looks brittle or loose, peel it off, clean the surface, and measure the gap before cutting a replacement to size. Follow the manufacturer’s directions, and call a pro if you’re dealing with specialty materials or tricky thresholds.
Get our Angi-powered app
