Roger's Welding & Fabrication

4.83 |329 Verified Ratings
Write a Review

Roger's Welding & Fabrication

4.83 | 329 Verified Ratings
Write a Review

951-662-1458

4660 Kansas Avenue
Riverside, CA 92507
Share
Your use of our services is governed by our Terms & Conditions

Profile
Roger's Welding & Fabrication


It's cheaper to Repair

Rogers Welding and Fabrication has 25 years of experience in the welding industry. We provide unique, personalized, cutting edge design and fabrication for our clients. In order to give professional service, you, the customer must be willing to pay one third to half the cost of a new fence or gate. Free estimates. This is the only way to get professional results. I promise it will look brand new. We are a cut above the rest. MINIMUM OF TWO HOURS ($175.00) IF YOU ARE NOT WILLING TO PAY THE $175.00 PLEASE DO NOT CALL, Our technician requests a photo to be sent of the work requested in order to maximize efficiency please send photos via text or email prior to requesting our services, so we can continue to offer same day services when available. Kindly keep dogs inside the home if requested when doing exterior work.

Achievements

Learn how HomeAdvisor screens and approves their pros.

Service Area

  • Riverside
  • Anaheim
  • San Bernardino
  • Irvine
  • Santa Ana
  • Orange
  • City of Industry
  • Whittier
  • Fullerton
  • Laguna Beach
  • Moreno Valley
  • Corona
  • Newport Beach
  • La Puente
  • Garden Grove
  • Huntington Beach
  • Ontario
  • Menifee
  • Mission Viejo
  • Fontana
  • Temecula
  • Rancho Cucamonga
  • Pomona
  • San Juan Capistrano
  • West Covina
  • Perris
  • Buena Park
  • Hemet
  • Laguna Hills
  • El Monte
  • Westminster
  • San Jacinto
  • Yorba Linda
  • Sun City
  • Laguna Woods
  • La Mirada
  • Fountain Valley
  • Loma Linda
  • Montclair
  • Upland
  • Aliso Viejo
  • Duarte
  • Tustin
  • La Habra
  • Murrieta
  • Costa Mesa
  • Redlands
  • Covina
  • Lake Elsinore
  • Lake Forest
  • Brea
  • El Toro
  • Placentia
  • Rialto
  • Laguna Niguel
  • Glendora
  • Walnut
  • Diamond Bar
  • Arcadia
  • Chino
  • Hesperia
  • Grand Terrace
  • Villa Park
  • Monrovia
  • Trabuco Canyon
  • Jurupa Valley
  • Dana Point
  • Homeland
  • Cedarpines Park
  • Winchester
  • Silverado
  • Nuevo
  • Norco
  • Green Valley Lake
  • Hacienda Heights
  • Claremont
  • Bryn Mawr
  • Banning
  • Calimesa
  • Chino Hills
  • Mentone
  • Angelus Oaks
  • Fawnskin
  • Sierra Madre
  • Forest Falls
  • Pearblossom
  • Lake Arrowhead
  • Running Springs
  • Temple City
  • Wildomar
  • Foothill Ranch
  • Phelan
  • Cabazon
  • Pico Rivera
  • Rimforest
  • Capistrano Beach
  • Midway City
  • Corona del Mar
  • Newport Coast
  • Ladera Ranch
  • See All >

Services Offered

Fences
  • Wrought Iron Fence Repair
Metal Fabrication
  • Metal Stairs & Railings Repair

Areas of Expertise

  • Welding
  • Repair Chain Link Fence and Install Chain Link Fence

Product Brands Used

  • Dunn-Edwards paints Rust-oleum primer Aqua-Lac

Quick Facts

Business Hours
Monday:
6:00 AM to 9:00 PM
Tuesday:
6:00 AM to 9:00 PM
Wednesday:
6:00 AM to 9:00 PM
Thursday:
6:00 AM to 9:00 PM
Friday:
9:00 AM to 6:00 PM
Saturday:
9:00 AM to 6:00 PM
Sunday:
6:00 AM to 9:00 PM
(Please call to confirm)
  • Free Estimates

Credentials

In Business Since: 1995
State Licensing
Trade: C-60 Welding
License #: 775242
Expiration: 02-28-2022
Awards
  • Best of HomeAdvisor 2013, 2014 and 2015!!
Screening
HomeAdvisor Screened. View Details

HomeAdvisor allows Service Professionals to post information about themselves and their business on their profile. HomeAdvisor does not review or verify the information or representations set forth in those profiles, as they are self-reported by the Service Professional.

HomeAdvisor verifies state-level licensing where applicable - note: some states require local or county level licensing and you should verify whether or not your pro is properly licensed.

To find more licensing information for your state, visit our Licensing Requirements page.

Business Overview

How We Got Started

We started in this industry in 1995.

We describe our business as Family owned and operated

 

Photos
Roger's Welding & Fabrication


My Work
2 Projects
HomeAdvisor: The nation's largest network of screened and rated pros.

Ratings & Reviews
Roger's Welding & Fabrication

Real feedback from real homeowners.
Learn more about this pro by reading the ratings and reviews below.
Write a Review
Showing 1-10 of 329
  Page 1 of 33
Sort by newest   Date ▼   Rating  
4.0   |  
Review by in San Jacinto, CA
Quick and easy. No complaints about the work. Was able to adjust and repair an uncommon gate.
Was this review helpful?  
5.0   |  
Review by in San Dimas, CA
I have 400 feet of iron fence around the perimeter of my property and about 50 feet was rusted out and needed repair. Dave Roger gave me a quote less than a major fence repair company gave me a did an excellent job. Due to the original custom design I would call Dave an artist in his ability to repair and make the design better than the original. Nobody would go wrong working with Dave. On budget and on time.
Was this review helpful?  
5.0   |  
David Rogers repaired several rusty areas on our wrought iron fence. His work was super outstanding. He cleaned up after the project wax complete. You canâ t really see weâ re all the repairs were done, which is super clean work. I would highly recommend Roger Welding and Fabrication to anyone who is looking for this type of repair work. Don
Was this review helpful?  
5.0   |  
Review by in Riverside, CA
The job was well done, and was done on time... price was affordable., I was satisfied with the service. I would recommend ( Rogerâ s Welding and Fabrication ) Thank you ð
Was this review helpful?  
5.0   |  
Review by in Temecula, CA
Very hard working, great repair job for a very reasonable cost. Have other wrought iron fence that Roger will come back to repair. One of the best Home Advisor referrals.
Was this review helpful?  
5.0   |  
Review by in Rancho, CA
He called, scheduled his arrival with an ETA same day, arrived within agreed time frame, made the repairs timely and communicated with me throughout the repair. Outstanding individual to do business with.
Was this review helpful?  
5.0   |  
Rogers Welding and Fabrication: Outstanding Integrity, Fair priced. Skill and Work Quality are second to none. Yesterday, June 8, 2020, I went searching online for a contractor who would repair a ten foot section of an ornamental iron fence spanning about 53â of my back yard. It is a 3.5â high fence atop of a short block wall. The section of fence needing repair was damaged by a large branch that fell from a city pine tree near my wall. The city of Rancho Cucamonga was unwilling to assume damages. My internet search landed me on Home Advisorâ s site; I must preface this review by saying I donâ t usually trust home repair sites like thisâ this one worked out very well. David Rogers, Rogersâ Welding & Fabrication, called me back within the hour. I described the damage, and David committed to coming to my home for an estimate today between 7 and 8 AM. If I could pick multiple choice topics for this review. I would rate David Rogers in these areas to name a few: Integrity: David is a man who says what he means and means what he saysâ verified by his punctuality, follow through, and work ethic. He showed up when he said he would, sourced hard to find parts to match my existing fence and worked hard on this project in the hot sun until it was finishedâ the same day he started. He kept his word at every step of this job. Fairness: His price was very fairâ and worth every penny. Skill: Outstanding! While he was very efficient, David didnâ t rush this job; he took the time to make sure his fabrication matched the existing work exactly. Work quality: Excellent! The finished product literally looks like it never happened. I have found that while cheaper, getting a section of ornamental iron fence repaired is much harder than getting a whole new fenceâ there just doesnâ t seem to be a horde of contractors willing to take on small jobs. David Rogers is a certified, licensed welding and metal fabrication contractor: License # 775242. His certification extends to ASME pipe and pressure vessels. I would hire David again in a heartbeat. Most Sincerely, Bruce Wilson
Was this review helpful?  
5.0   |  
Review by in La Habra, CA
Was this review helpful?  
5.0   |  
Review by in Murrieta, CA
David Roger was very knowledgeable and a hard worker. He accomplished things in a no nonsense manner, left things neat and tidy and was very fair in pricing.
Was this review helpful?  
4.0   |  
Review by in Colton, CA
Good job and honest man
Was this review helpful?  
Showing 1-10 of 329
  Page 1 of 33

Seal of Approval

What is the screening process that Service Professionals go through in order to become members of the HomeAdvisor network?

  1. Verify Trade License
    HomeAdvisor checks to see if the business carries the appropriate state-level license.
  2. Verify Insurance
    As a part of our screening process, we encourage professionals to carry general liability insurance. We require coverage for hundreds of services.
  3. Verification of State Business Filings
    For business types that require a Secretary of State filing, we confirm that the business is in good standing in the state in which it is located.
  4. Criminal Records Search
    HomeAdvisor uses 3rd party data sources to conduct a criminal search for any relevant criminal activity associated with the owner/principal of the business.
  5. Sex Offender Search
    We confirm that the owner/principal is not listed on the official state Sex Offender web site in the state in which the owner/principal of the company is located.
  6. Bankruptcy Search
    We use 3rd party data sources to check the history of the principal/owner of the business for bankruptcy filings by or against them.
  7. Legal Search for Civil Judgments
    We use 3rd party data sources to check the principal/owner of the business for state level civil legal judgments entered against them.
  8. Liens Search
    We use 3rd party data sources to check the principal/owner of the business for liens placed against them.
  9. Identity Verification (SSN)
    HomeAdvisor verifies the social security number(s) of the owner/principal for identity check purposes. This check applies primarily to smaller business entities.
  10. Identity Verification (Reverse Phone Lookup)
    We conduct a reverse business phone lookup to identify records matching the phone number information provided by the business.



NOTE: Member service professional information confirmed as described above may change or expire over time; while HomeAdvisor attempts to maintain accurate and up-to-date information, and confirms changes when notified, we cannot guarantee that profile and screening information is accurate. Therefore, we recommend that before working with a service professional you verify that information presented is still current and/or acceptable to you.
Please see HomeAdvisor's Terms and Conditions for a full description of how we screen Service Professionals

**Only for U.S. service professionals

Final Step - Confirm Your Appointment:

Confirm your appointment with on , - Change


Required
Required
Required
Required
 
 
 

By clicking Confirm Appointment, you affirm you have read and agree to the HomeAdvisor Terms & Conditions, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.