JT Winn

After Joe left, I had a hard time locking & unlocking the door it took 2 hands. I noticed uneven areas and hired another man to inspect the door & side lights. After pulling off the molding we could see that waterproof flashing tape was not used and we agreed to remove the door to inspect it thoroughly. Findings: - The threshold was not leveled properly affecting the alignment. -Shims were used but in the wrong places and no shims were used at the top. No weatherproof flashing tape was used or foam insulation to seal gaps.. Joe put back the old insulation back which my new installer said had mold and should not have been used. -The latch lock was not routed properly, the dead bolt was difficult to use because of the alignment. I had to push on the door to close it. The caulking on the outside was very noticeably sloppy. I did not bother to contact Joe because I lost confidence in his work ethics and skill. My door now is properly insulated and opens, closes and locks easily.

He was very knowledgeable and gave us tips on what type of doors to install later.

Great! Perfect. Will use again.

Total professional from start to finish. Job was done quickly considering all that had to be done and with outstanding craftsmanship. Will hire him again for future door projects

He was very professional. He did a good job of communicating the price, the time he would be here and completing the job. They were on time and on budget.