Who to Call to Replace Siding on Your Chimney

This article was created using automation technology and thoroughly fact-checked and edited by HomeAdvisor Editor Ryan Noonan.

If you are asking who replaces chimney siding, hire an experienced siding contractor. These pros remove damaged panels, follow local building codes, and install proper weather barriers and clearances around masonry and heat. A qualified general contractor can do this work, but dedicated siding pros often cost less and match materials better.

Benefits of Hiring a Siding Contractor to Replace Your Chimney Siding

Hiring a local siding contractor is the best answer to who replaces chimney siding. Pros understand local building codes, use correct weather barriers, and maintain safe clearances around hot chimney surfaces. They also inspect underlying brick for moisture, mold, or crumbling masonry to prevent future damage. Professional installation reduces fire risk, improves curb appeal, and gets the job done correctly the first time.

• Understands local building codes

• Advises on permits when required

• Installs proper weather barriers

• Maintains safe clearances near heat

• Uses correct fasteners for masonry

• Inspects brick for moisture or mold

• Identifies and addresses crumbling masonry

• Reduces fire and water damage risks

• Matches existing siding more accurately

• Completes work on a timely schedule

If your chimney siding shows signs of water damage, rot, or mold, you might want to consider a siding contractor near you to ensure the job is done safely and up to code.

Can I Hire a General Contractor to Replace My Chimney Siding?

You can hire a general contractor to replace chimney siding. Reputable GCs know siding removal, repair, and building codes. However, dedicated siding pros often cost less because they do not subcontract and may secure better deals on materials. They are also more likely to match existing siding from stock. When possible, choose a local siding contractor with chimney siding experience.

How Do Siding Professionals Replace Chimney Siding?

Here is an overview of what you should expect when you hire a professional siding contractor to replace your chimney siding.

1. Remove damaged siding

2. Clean up debris

3. Inspect for water damage or rot

4. Measure and cut new siding

5. Wrap chimney with a moisture barrier

6. Install furring strips for clearance

7. Install the starter strip

8. Attach first row, then successive rows

9. Install trim at edges

10. Caulk gaps to prevent seepage

11. Paint siding if needed

How Much Does Siding Replacement Cost?

General siding replacement costs $3 to $30 per square foot, and work over brick can easily double due to added labor. For an average chimney, only the exposed sides need siding, often totaling 80 to 120 square feet. Expect $480 to $7,200 overall, with an average of $1,600 for partial chimney siding replacement. Material and style drive costs, and complex masonry installation increases labor effort.