Get matched with top range & hood cleaners in Belmar, NJ

"Silvana and her team did an excellent job on 24 hours notice! They were attentive to detail and left our home spotless, even with tough grease stains on our stovetop. I definitely recommend her."

"undefined"

"Janet and her team provided after-construction clean-up services in my home, and the experience was exceptional from start to finish. Prior to the job, Janet came by for a walk-through to accurately assess the scope of work, time required, and cost. Her attention to detail and professionalism were immediately evident. Janet clearly takes pride in the quality of service her company delivers. On the day of the clean-up, her team worked tirelessly for several hours, leaving no corner untouched. They cleaned everything—from wiping down walls, deep-cleaning bathrooms, and scrubbing the kitchen (including the microwave!), to making the beds with fresh linens. The end result? The house was absolutely SPOTLESS! If I could give Janet’s Cleaning Service 100 stars, I would! I now use their services on a monthly basis, and I couldn’t be happier. Highly recommended!"

"Professional and excellent work."

"I was extremely pleased with the service. Getting the appointment was very easy. The crew showed up on time and did a great job cleaning our house. The whole process was very professional from beginning to end. I would highly recommend them."

"They did an amazing job ! Diana really clean my apartment and did a great job. She made my apartment look brand new. She also paid attention to detail well. I will hire them again for on going services, it was worth the money !"

"Highly recommend T&S Remodelling for gutter cleaning as well as chimney work (i.e. repair, liner). Jeff is professional and clear on the pros/cons of your options. He delivers what he says he will do, is quick to respond, and genuinely wants to make sure that your questions are answered. Thank you!"

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."