Top-rated sheet metal and ornamental metal fabricate pros.

Get matched with top sheet metal and ornamental metal fabricate pros in Hollywood, FL

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Sheet metal and ornamental metal fabricate pros in Hollywood

Avatar for Fine Edge Industries LLC
Fine Edge Industries LLC
5.0(
6
)

Serving Hollywood, FL and surrounding areas

Approved

In business since 2023

Free estimates

Emergency services offered

"Fine Edge Industries exceeded my expectations with their outstanding metal fabrication and restoration service!!! from start to finish, the team demonstrated professionalism, expertise, and dedication to quality work. they surpassed all of my requirements, delivering outstanding results that perfectly matched my vision. the communication was seamless throughout the process, and they completed the project within the agreed timeframe. I'd highly recommend this company to anyone seeking top-notch metal fabrication & restoration. It was a first for me but definitely looking forward to hiring them again!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+20

Response time1 day
4 neighbors recently requested a quote
Recommended by66%of homeowners
Avatar for SoFlo Custom Fabrication
SoFlo Custom Fabrication
4.7(
9
)

Serving Hollywood, FL and surrounding areas

In business since 2021

Free estimates

Emergency services offered

"So happy with my experience with SoFlo! Had Cory make me a custom trash enclosure, that is exactly what I needed while also looking so good! Very easy to work with and would recommend and will be using for a couple other custom metal pieces I have in mind."
Modification / Customizations to Race Car radiator
Modification / Customizations to Race Car radiator
Recommended by85%of homeowners
A-1 Interior Works Inc
4.7(
148
)

Serving Hollywood, FL and surrounding areas

In business since 2005

"Overall Dan was very professional, responsive and punctual. It is amazing when you have a vendor show up at the time promised! He was always at least 10 minutes before the promised time. Dan and Tony were able to complete the long lists of items within a few days. I appreciate all of your hard work and dedication. The guys even came to my place on a Sunday to put in a half day to meet my deadlines. Be sure to be clear when giving direction - we had a couple mistakes that had to be fixed along the way due to paint selection in the wrong areas within the property. Dan and Tony fixed the issues once addressed with no complaints. Dan went above and beyond to help me with issues that arose during the project (i.e. exchanging a damaged bathroom vanity and minor retro fitting to old plumbing). Thank you again Dan for everything! I will definitely recommend you to my friends and family in the South Florida area.
"
Recommended by95%of homeowners
Avatar for Morton Roofing Inc
Morton Roofing Inc
4.4(
223
)

Serving Hollywood, FL and surrounding areas

In business since 1952

Free estimates

Emergency services offered

"This is an interesting review for me to write, since there was a problem, a big one, but it turned out alright in the end. I chose this roofer due to great ratings, and lots of them, on Angies List. The company completed my skylight repair on time and without problems. Since I was happy with that project, and based on the result, I asked them to bid on the flat roof replacement. They did, and the contract for the flat roof was signed, along with a deposit. This was October of 2016. Then there was a serious issue, in that the job was not started when expected, and time passed and I got concerned about the deposit. I had a conversation with the owner, who explained that he had been taken advantage of by a new business partner. He provided many details that I will not present here. He said he would not let me down and would start my job as soon as he put his business back in order and regained full control of the company. I was not all that comfortable with this situation, but I looked up the company records on the Secretary of State website and his explanation was documented there. In January 2017 he called and said he was getting the business back in order. In February he called and was able to start and complete the job without further problems. I am very happy with the job and the white membrane roof already is making the patio much cooler. I see on Angies List as I write this that there have been a number of recent reviews with poor ratings that correspond with the period the business had problems. Prior to that there were hundreds of 'A' reviews (which is why I chose them to do the job). While the job was being done I had the opportunity to meet the owner, his crew, and members of his family. In my opinion, they are a well established family company with great capabilities that ran into a business reversal at the end of last year. They turned it around and met their commitment to me as soon as they were able. I would use them again and recommend them to others. And by the way if you have a flat roof on part of your house, when it comes time to replace it, you should check out the idea of a white membrane ('TPO') roof to keep the area underneath much cooler than a black asphalt roof."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by94%of homeowners
Avatar for Preventive Maintenance Support Services
Preventive Maintenance Support Services
4.4(
218
)

Serving Hollywood, FL and surrounding areas

In business since 1994

Free estimates

Emergency services offered

"The Permit and engineering took a little longer than we wanted but the construction was on time and not disruptive to us. I had other companies in the past that left materials and debris all over the property and it was not very organized but this company was very good the kept everything neat and clean everyday. I will certainly recommend them to anyone."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+8

Recommended by94%of homeowners
Avatar for Eco Magic Environmental
Eco Magic Environmental
4.7(
24
)

Serving Hollywood, FL and surrounding areas

In business since 1987

Free estimates

Emergency services offered

"We got lucky with these guys. They were professional, knowledgeable, courteous, and honest.. The work entailed removing kitchen cabinets and walls due to water damage that turned into mold. My whole family was sick. After the remediation, they sanitized the whole house, furnishings, and the AC units. Thank you Angle List for sending me these guys!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by88%of homeowners
Showing 1-10 of 28
FAQs for sheet metal and ornamental metal fabricate projects in Hollywood, FL

Sheet metal stamping and pressing are specialized manufacturing methods in which custom dies and powerful stamping presses transform flat metal sheets into precisely shaped components. These techniques form designs with embossed, coined, or flanged edges for high-quality, mass-produced parts. The process employs advanced tooling to convert raw metal into accurate, finished products efficiently while ensuring cost-effective production for both single and low-volume projects. By applying controlled force, fabricators achieve superior design accuracy and consistent quality.

Attempting to stamp metal at home is neither safe nor effective for shaping construction-grade materials. The process requires professional-grade stamping presses and custom tooling that are not replicable with household tools. Professional fabricators utilize heavy-duty machinery in controlled workshop settings to apply precise force and achieve quality results. While some metals can be bent by hand for simple tasks, attempting full-scale stamping at home poses risks of injury and subpar performance. It is advisable to rely on trained experts for secure and accurate metal fabrication.

Stainless steel stands as the most common sheet metal because its durability, weather resistance, consistent performance, and affordability make it ideal for construction projects. Its excellent resistance to damage and harsh weather conditions ensures long-lasting quality, making it the top choice among homeowners and professionals. The material’s reasonable cost range of $8 to $19 per square foot further reinforces its reliability in various building applications.

To obtain an accurate quote for sheet metal fabrication, provide detailed project specifications to a professional fabricator. Supplying exact dimensions, angles, and intended uses enables experts to produce precise estimates. Qualified fabricators utilize advanced drafting software and thorough project planning to convert your requirements into an exact quote that reflects the true scope of work. Engaging a professional ensures that all measurements and design details are accurately documented, resulting in a reliable price estimate without unexpected costs.

The Hollywood, FL homeowners’ guide to sheet metal and ornamental metal fabricates

From average costs to expert advice, get all the answers you need to get your job done.

  • wrought iron railings on wooden steps in home

    If you’re planning to install wrought iron railings, plan to budget based on type and number of railings and local labor rates.

  • construction welder welding metal components

    Explore what affects welding costs, including project size, metal type, and method. Learn how labor, materials, and design choices shape the final bill.

  • wooden staircase with glass railing in home

    HomeAdvisor's Glass Railing Cost Guide provides glass banister panel, equipment, and labor prices per foot for decks, stairs, and balconies. Compare costs of plexiglass, tempered glass, frameless, and exterior glass railing systems.

  • welder creating a custom metal structure in workshop

    HomeAdvisor's custom metal work cost guide offers average cost information reported by customers who have had a custom metal structure or object fabricated. Enter your zip code for local pricing.

  • roll of galvanized steel sheet metal fabricated to specifications

    Estimate how much sheet metal costs for your project based on professional fabrication fees and average material expenses using our comprehensive guide.