Top-rated sheet metal and ornamental metal fabricate pros.

Get matched with top sheet metal and ornamental metal fabricate pros in Jacksonville, FL

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Sheet metal and ornamental metal fabricate pros in Jacksonville

Avatar for Trifecta Outdoor Services, LLC
Trifecta Outdoor Services, LLC
5.0(
47
)

Serving Jacksonville, FL and surrounding areas

In business since 2015

Free estimates

Emergency services offered

"I recently hired Greg and his crew for tree work at my property, and I am extremely satisfied with the results. Greg was highly responsive to my request for a quote, promptly scheduled a visit to assess the job, and provided a very competitive price. The work involved trimming three trees — one in the front yard and two in the backyard — to clear them from the roofline. Although there was a slight delay on the day of the job due to unforeseen complications, Greg and his team arrived ready to work and completed the project as scheduled. They ensured all debris was thoroughly cleaned up, leaving the yard in excellent condition. Overall, Greg and his team exceeded my expectations with their professionalism, efficiency, and attention to detail. I will certainly be using their services again for any future tree work. Thank you, Greg and team!"
Two palms to be removed due to rotten trunk
Crane assisted Live Oak Removal
4 Pines & Crane set up to remove without collateral damage
Large Rotten Oak Stump
After palms removed without any collateral damage

+29

Recommended by100%of homeowners
Avatar for National HomeCraft LLC
National HomeCraft LLC
4.5(
191
)

Serving Jacksonville, FL and surrounding areas

In business since 1967

Free estimates

Emergency services offered

"Everything went great! The project took about 2 weeks. The old tar/gravel roof was removed and a new metal roof was installed on 3/4 of the house. The other 1/4 required TPO since it was a completely flat area. A lot of the old wood had to be replaced due to the age and termite activity. Flashing up around the chimney is holding up great and a part of my old rainwater collection gutter system was even reinstalled on the new roof. The fascia and soffit looks great too. We've been through 5-6 rain storms already and there has been no leaks. The wood around the garage was replaced and then the whole thing was wrapped in vinyl for a clean look. Two end features on the peak of the house were wrapped as well and it made the house look very clean and neat. As for cleanup, for the most part all went well. As can be expected, a few old roofing nails were found, but not that many. A few short pieces of metal roofing and a few leftover panels were left behind as well as a bag of screws. (We made a shed with them) Overall we were very satisfied. Other roofing companies we called were quoting us $18-20K without the addition of the extra wood and the cost of the fascia/soffit or the garage repair."
All of the doors and windows were replaced by National HomeCraft.
Shower Replacement
The customer wanted a custom pattern created with the vinyl siding.
Metal shingles that look like real clay tiles. The color will last forever and the shingles will stand up to 200mph winds!
Shower with concrete wall pattern and black fixtures

+11

Recommended by97%of homeowners
Schultz Roofing Co.
4.9(
19
)

Serving Jacksonville, FL and surrounding areas

In business since 1958

Emergency services offered

Credit card accepted

"I call Schulz Roofing company because I thought I had a problem with shingles above a very long rain diverter. I met Mitch McCue, owner and he inspected the area of concern and assured me that it was not a problem. He was probably the most honest contractor I ever met. He answered a lot of questions I had regarding my roof. I would highly recommend his services and would definitely use his company to repair or replace my roof."
Recommended by100%of homeowners
Avatar for Valiant Flux LLC
Valiant Flux LLC
5.0(
5
)

Serving Jacksonville, FL and surrounding areas

In business since 2021

Free estimates

Credit card accepted

"Jordan was Johnny on the spot! Came within an hour of him returning my call. I was extremely happy with the work done and Jordan himself was polite and engaging. Cleaned up after himself as well. I highly recommend him!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by100%of homeowners
Anything Metal, Inc.
New to Angi

Serving Jacksonville, FL and surrounding areas

In business since 2004

Anything Metal, Inc., is an owner operated company. I will work with you if you don't have plans or you do. I have the shop to build and fabricate any type of metal structure especially if you need to replace a dock or a stairway for your mezzanine in your office or home. When it is complete I will ship to your destination. My work is custom and done with great care & prfesstionalism. I take pride in my trade and I will give you quality with your project. I pay close attention to your plans and I will work with you to create that specific project that will meet your needs. I set myself apart from my competitors by giving you the best of the best. My work isn't complete until you are completely satisfied. My pricing along with my bids are fair and competitive for this type of business. I look forward in working with you.

Avatar for Southern Specialty Welding, LLC
Southern Specialty Welding, LLC
3.5(
3
)

Serving Jacksonville, FL and surrounding areas

In business since 2016

Free estimates

Credit card accepted

"Great!! These young men can in short notice. They were truly a god send. They worked non stop and completed the job within a couple of hours. I would highly recommend them😀"
custom handrails
before we fab
custom handrails
custom handrails
custom handrails

+46

Response time2 days
Recommended by100%of homeowners
Avatar for JH welding & fabrication
JH welding & fabrication
5.0(
1
)

Serving Jacksonville, FL and surrounding areas

In business since 2010

Tech-x services specializes in welding and custom fabrication, here at Tech-x we strive to be the best and make sure every customer is happy. We are an owner ran company with employees full of knowledge and dedication. We work commercial and residential jobs and are a very responsive team that cares.

Recommended by100%of homeowners
Showing 1-10 of 15
FAQs for sheet metal and ornamental metal fabricate projects in Jacksonville, FL

Sheet metal stamping and pressing are specialized manufacturing methods in which custom dies and powerful stamping presses transform flat metal sheets into precisely shaped components. These techniques form designs with embossed, coined, or flanged edges for high-quality, mass-produced parts. The process employs advanced tooling to convert raw metal into accurate, finished products efficiently while ensuring cost-effective production for both single and low-volume projects. By applying controlled force, fabricators achieve superior design accuracy and consistent quality.

Attempting to stamp metal at home is neither safe nor effective for shaping construction-grade materials. The process requires professional-grade stamping presses and custom tooling that are not replicable with household tools. Professional fabricators utilize heavy-duty machinery in controlled workshop settings to apply precise force and achieve quality results. While some metals can be bent by hand for simple tasks, attempting full-scale stamping at home poses risks of injury and subpar performance. It is advisable to rely on trained experts for secure and accurate metal fabrication.

Stainless steel stands as the most common sheet metal because its durability, weather resistance, consistent performance, and affordability make it ideal for construction projects. Its excellent resistance to damage and harsh weather conditions ensures long-lasting quality, making it the top choice among homeowners and professionals. The material’s reasonable cost range of $8 to $19 per square foot further reinforces its reliability in various building applications.

To obtain an accurate quote for sheet metal fabrication, provide detailed project specifications to a professional fabricator. Supplying exact dimensions, angles, and intended uses enables experts to produce precise estimates. Qualified fabricators utilize advanced drafting software and thorough project planning to convert your requirements into an exact quote that reflects the true scope of work. Engaging a professional ensures that all measurements and design details are accurately documented, resulting in a reliable price estimate without unexpected costs.

The Jacksonville, FL homeowners’ guide to sheet metal and ornamental metal fabricates

From average costs to expert advice, get all the answers you need to get your job done.

  • wrought iron railings on wooden steps in home

    If you’re planning to install wrought iron railings, plan to budget based on type and number of railings and local labor rates.

  • construction welder welding metal components

    Explore what affects welding costs, including project size, metal type, and method. Learn how labor, materials, and design choices shape the final bill.

  • wooden staircase with glass railing in home

    HomeAdvisor's Glass Railing Cost Guide provides glass banister panel, equipment, and labor prices per foot for decks, stairs, and balconies. Compare costs of plexiglass, tempered glass, frameless, and exterior glass railing systems.

  • welder creating a custom metal structure in workshop

    HomeAdvisor's custom metal work cost guide offers average cost information reported by customers who have had a custom metal structure or object fabricated. Enter your zip code for local pricing.

  • roll of galvanized steel sheet metal fabricated to specifications

    Estimate how much sheet metal costs for your project based on professional fabrication fees and average material expenses using our comprehensive guide.