Get matched with top solar panels for electric system repairers in your area

"They did a great job, although a little expense despite the fact that I had already bought the new faucet."

"Less than 5 years ago, I spent in excess of $10,000 to have a new unit installed with a 10 year warranty. I should have seen the red flags from the very beginning. The sales representative told us additional vents would be installed and when the installation crew showed up, that did not happen. Fast forward to the present and I am now on my 4th phone call for an appointment this season, 3 days so far of not being able to work as I waited for a technician to come diagnose the problem. The 3rd. tech came last night and indicated that the work the other tech did was not for the root of the problem. (I was told in front of witnesses that the work needed to be done, was not covered under warranty, would cost me $367 and would fix my issues)In fact, the 3rd tech only made the issue worse by leaving our attic return unscrewed and overfilling our unit with Freon that the 4th tech had to remove from our system. Upon leaving last night I was told that everything was corrected. Today - my home is slowly creeping up in temperature (presently 80 degrees inside, while set to 72). The company keeps trying to sell me a "maintenance plan" and I keep reiterating to EVERY one who pushes it that we have been getting tune ups/cleanings elsewhere and will only use them for warranty issues since we have had NOTHING but problems with them."

"Fabulous! We needed our water conditioner serviced and other company wouldn't touch it because they didn't install it and just wanted to sell us a new one. Rebecca scheduled us for the following day! Steve Venditti was great, has 20 years of experience and knew what he was doing. He spoke with the manufacturer and they decided what needed to be done. He had the parts on his truck and 4 hours later the job was done. $500 included parts and labor and service call. Very fair price and excellent service. Totally professional. Highly recommend."

"Never come to a person's house to fix an issue and leave the person with a problem. No matter what the problem is, let the person know and do your best to fix it, even if it costs more money. Fix it before you leave. No comebacks. You should never leave the work incomplete. I started with a leak on my pipes and they left my house with the pipes still leaking. What was the purpose of them coming? My bill is still going."

"Roofing and solar done, battery pending in one week"

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."

"WORK WAS DONE WELL AND ON TIME....VERY COOPERATIVE AND CORDIAL...."