Top-rated generator repair pros.

Get matched with top generator repair pros in Palestine, TX

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Generator repair pros in Palestine

Avatar for C. Woods Company
C. Woods Company
4.6(
153
)

Serving Palestine, TX and surrounding areas

Angi Approved

Super Service Award Winner

In business since 1956

Free estimates

Emergency services offered

"After two cancellations, two techs arrived promptly on the third appointment. They were clean, nice-looking young men...very courteous and friendly. They surveyed the job, calculated a price, went right to work, and were done in under an hour. The work done was perfect. An estimate they made to perform some extra work if necessary (snake the line is the repaired sink did not drain properly) seemed unreasonably high - an additional $274. The $319 I paid to fix the sink wasn't cheap, since it took them less than 30 minutes to complete, but I wasn't expecting cheap. I would consider using this firm again. "
Work
Work
Work
Work
Work

+21

38 neighbors recently requested a quote
Recommended by88%of homeowners
Request Quote
Avatar for Donohue's Lightning Rods
Donohue's Lightning Rods
4.9(
50
)

Serving Palestine, TX and surrounding areas

Angi Approved

In business since 1971

Free estimates

Emergency services offered

"The job was beautifully and professionally done. I have a zero scape yard and the gentleman was concerned about disturbing the gravel when putting the rod into the ground. WOW!!!!"
Jobs from the last 3 year
Jobs from the last 3 year
Lightning protection
Lightning protection
Lightning protection

+10

Response time1 day
43 neighbors recently requested a quote
Recommended by96%of homeowners
Request Quote
Avatar for Tri-State Water, Power & Air
Tri-State Water, Power & Air
4.4(
5
)

Serving Palestine, TX and surrounding areas

Angi Approved

In business since 1992

Free estimates

Emergency services offered

We are the experts in the field of Whole Home Generator Sales and Installation, with over 20 years of experience in the game. We provide turn-key installation by licensed professionals - 24 hour emergency service - Remote Monitoring - Long term maintenance and service by factory trained technicians.

Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

73 neighbors recently requested a quote
Request Quote
Avatar for Alexander Technical Resources
Alexander Technical Resources
4.7(
1,889
)

Serving Palestine, TX and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"Online repair. He has helped me in the past and I cannot say enough nice things about him. The next day I had a tiny issue and he responded immediately. Thorough. Thank you!"
Recommended by90%of homeowners
Request Quote
Avatar for The Darville Company - Air Conditioning & Plumbing
The Darville Company - Air Conditioning & Plumbing
4.9(
104
)

Serving Palestine, TX and surrounding areas

In business since 1947

Free estimates

Emergency services offered

Family owned. A full service mechanical contractor specializing in the comfort of the residents of all of Darville USA. Serving clients in Midland and Odessa as well as surrounding counties; all the Permian Basin. \nAdditional email - darvilledispatch@darvilleco.com.\nDBA - The Darville Company.

Recommended by96%of homeowners
Request Quote
...
Showing 1-10 of 179
FAQs for generator repair projects in Palestine, TX

There is often some confusion about the type of work these professionals do. They only work on electrical systems such as outlets, lighting fixtures and electrical panels – they aren’t appliance repairmen.

There are three types of electricians: Master, Journeyman and Apprentice. Electrical licensing varies quite a bit by state. Some have licenses for apprentices and some do not. Some have a master’s rank while others stop at journeyman. Despite the differences, they all require a minimum amount of experience and usually classroom time.

  • Apprentice electricians aren’t usually licensed and spend 4 years learning the trade. Throughout that time, they work on a wide range of projects to learn to become a Journeyman. They’ll do basic work like installing fixtures and replacing outlets all the way to assisting in wiring a home. Regardless of the type of project, they must always be supervised by a Journeyman or Master electrician.

  • Journeymen work without supervision. In a few states, this is the highest level available and they can do all levels of work from wiring a new home to installing a light. In some states, they need a separate electrical contractor license to run a business. In places with a master’s level, a journeyman can do all work besides design new electrical systems.

  • Master electricians usually manage a shop, design new electrical systems in new construction and oversee both Journeyman and Apprentices. They typically bid new projects. Though they focus on larger projects, it’s not unheard of for a homeowner to request a Master Electrician for a house call. If you do, expect to spend up to 25% more for the visit.

Generally, you don’t tip electricians, but that’s not to say they don’t appreciate it if you do. You can offer them something to drink or eat, like coffee and donuts. Most will appreciate it if you do.

The education and certifications required to become an electrician vary by state, though they generally follow this list:

  1. Apprentice

    • Does not always require a license depending on the state.

    • Learns on the job under Journeyman and Master Electricians.

    • Usually needs 4 years on-the-job training before they can test for a Journeyman license. Many states also require a technical degree to advance.

    • Always require supervision.

  2. Journeyman

    • Needs between 8,000 to 10,000 hours of on-the-job training and usually 500 to 1,000 hours of classroom experience.

    • Can usually supervise apprentices.

    • They can diagnose and repair electrical problems.

  3. Master

    • Achieved after an additional two years (4,000 hours) working as a Journeyman and taking the Master Electrician Exam.

    • Besides diagnosing and repairing electrical systems, they also design them. In most places they run shops and inspect Journeyman and Apprentice work.

    • Not a recognized rank in all states.

  4. Electrical Contractor License is an optional license in some states for a Master Electrician to run a business. Some states have this instead of the Master license.

Electricians make an average of $26 per hour but it ranges with experience and licensing. An apprentice may make about half that while a Master Electrician may hit closer to $40 per hour. This figure represents how much they make; not how much they bill. Their salary is only one component of their costs. They must also figure in overhead, taxes, equipment, insurance and several other expenses.

Leave electrical work to the professionals. Electrical systems are complex and potentially hazardous when not handled and installed correctly. If it were easy, it wouldn’t take 4 years to become a journeyman or 6 years for a master’s license. If you are determined to forge ahead yourself, understand home electrical safety before beginning any project.Even for simple common electrical projects, a licensed pro is best. Not only is it safer, but contractors guarantee and insure their work. Hire a professional to keep your home’s electrical systems functioning properly and safely.

Use our comprehensive electrician directory page to find local, licensed contractors. You can browse ratings, reviews and pricing of top professionals in your area. Sign up to receive quotes or let us match you to an electrician near you.

The Palestine, TX homeowners’ guide to generator repair services

From average costs to expert advice, get all the answers you need to get your job done.

See all articles