Serving Rocky Mount, NC and surrounding areas
Approved (Corporate)
In business since 2007
Credit card accepted
Offers commercial services
"Got back to me quickly but couldn?t help me because I didn?t purchase my exterior front door from them"

Serving Rocky Mount, NC and surrounding areas
Approved (Corporate)
In business since 2007
Credit card accepted
Offers commercial services
"Got back to me quickly but couldn?t help me because I didn?t purchase my exterior front door from them"
Serving Rocky Mount, NC and surrounding areas
Approved
In business since 2017
Emergency services offered
Warranties offered
"Great honest contractors. They did my bathrooms, hot water heater, unclogged my house drain and they did a French drain so my basement is not wet anymore. I already hired them to do my whole roof in the spring. I will hire them anytime."





+10
Serving Rocky Mount, NC and surrounding areas
Approved
Super Service Award Winner
In business since 2021
Free estimates
Emergency services offered
"Highly recommend. I had several repairs needed around my house. Gault met with me within one day, carefully reviewed all of my items, and provided thoughtful perspectives. I expressed that one repair was particularly urgent and Gault worked with me to have the work performed the very next day. The work was done with very high quality and professionalism. I am very satisfied and look forward to potential future engagements. The urgent work we had done was replacing a load bearing 6x6 leg on my screened-in porch."
Serving Rocky Mount, NC and surrounding areas
Approved (Corporate)
In business since 2006
Free estimates
Credit card accepted
West Shore Home offers a risk-free home improvement experience, so you never have to worry that you are sacrificing on quality, convenience, or expertise. We specialize in window, entry door, shower and bath replacements, including walk-in tubs. We offer fully customizable, limited lifetime-guaranteed solutions installed in as little as one-day. All of our installers are in-house employees, so we can guarantee the quality of the whole project from start to finish. We get it done the way you want - fast, easy, smart and right.\n \nOur team is following all CDC guidelines so we can provide you with the fast and convenient home improvements. We are also offering free virtual design consultations! Schedule your free consultation today.

Serving Rocky Mount, NC and surrounding areas
In business since 2007
Free estimates
Emergency services offered
"I had a couple of delays, and when the day to install came around there was an possible storm hanging around which delayed the start. There was a contractor? other roofer? I thought it was the the job foreman for Otto's but I think this guy was an independent contractor. I don't know except that he told me that Otto was not his boss. To make a long story short, I never ever saw Otto , he never showed his face on the job-site when I was there. I found that a little odd. it did rain for about five minutes on the first day and I was told that they would come back and finish the next day.They told initially that there was probably three sheets of sheathing that would need to be replaced. I could not be there that day as I had to work and I was a little concerned when they told me they found a "lot" of rotted wood. This was after I talked to my wife on the progress. I was not texted nor called to update me on these developments and they would now have to replace seven sheets of sheathing. When I saw them replace part of the roof the day that I was there I saw zero rotted wood. granted the part that was replaced was not as steep of a pitch and I did finally see some pictures. What really irked me is that no one took any wide angle shots of the area to really show me what needed to be replaced. The other thing is that Terry told me he had to replace a piece of sheathing on the back side by the chimney. I went up in the attic and looked and I saw a small patch where they took out my vent but I did not see any new sheathing in this area. This makes me concerned because how do I know how much they really replaced if this was not done. Otto does not have any free sheathing replacement, if you need it it is sixty dollars a sheet. Otto did give me a break by allowing me to buy my shearing and charging me thirty dollars labor per sheet. The thing that bothers me most is that there is sheathing missing where it was supposedly replaced and I have to pay $120.00 extra for two sheets. So it went from three sheets to seven...that to me is not even close. Otto's was fairly priced but If not for this sheathing fiasco I would be able to give Otto a good review...except that you will never see him except at the quote and to collect the money. I would probably choose a company that offers a a few sheets free instead."




Serving Rocky Mount, NC and surrounding areas
In business since 1977
Free estimates
Credit card accepted
"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"





+1

Serving Rocky Mount, NC and surrounding areas
In business since 1886
Free estimates
Credit card accepted
"I had to have them back out and redo the tile. We've already replaced the nuts and bolts in the drawers that were falling out."




Serving Rocky Mount, NC and surrounding areas
In business since 2014
Free estimates
"When you hire someone that you don't know, no matter how many favorable reviews they may have, you still take a chance. Will they live up to them? Well, Mr. Hendricks certainly did, and I am delighted with the work he did for me (he replaced the nose/sills of 3 dormer windows). He arrived as promised and stayed until the job was done, even though if meant he and his helper were packing up their tools after dark. Came back thee next morning to repair a broken cabinet in my workshop. Obviously takes pride in his work and has a great work ethic. Highly recommend!"

Serving Rocky Mount, NC and surrounding areas
In business since 2012
Free estimates
We are a locally owned and operated company with over 13 years of industry experience. We value honesty and integrity in all aspects of our business. We offer a variety of home improvement services that are customizable to each individual project. We specialize in new construction, remodeling, handyman and carpentry work and a variety of related service and repair projects. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building lasting relationships with our clients and guarantee your satisfaction!





+21

Serving Rocky Mount, NC and surrounding areas
In business since 2021
Free estimates
Credit card accepted
"Franklin was not only punctual and professional, but his attention to detail and expertise truly impressed me. He skillfully installed the fixture, ensuring everything was secure and perfectly aligned. The entire process was hassle-free, and the end result is simply stunning. I'm beyond satisfied with the service and would highly recommend him for any installation needs. Top-notch work all around!"
From average costs to expert advice, get all the answers you need to get your job done.

Budget for barn door installation costs based on factors such as materials, door type, door size, hardware, professional labor, and more.

Thinking about installing a pocket door? Discover what factors influence the total cost, including wall modifications, door materials, labor, and installation type.

Learn how much it costs to convert a window into a door, exploring how the door type, design, permit requirements, and labor rates affect total costs.

Budget for exterior door installation costs based on factors such as door type, materials, features, framing, labor, and more.

Explore how factors such as the door type, frame material, mesh, and labor rates affect the cost to install a screen door.

Explore how factors such as material type, labor rates, and brand affect the total cost of installing a security door in your home.