Top-rated sheet metal and ornamental metal fabricate pros.

Get matched with top sheet metal and ornamental metal fabricate pros in your area

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Sheet metal and ornamental metal fabricate pros in Waldorf

Avatar for Fusion Ironworks LLC
Fusion Ironworks LLC
814 Sheridan Street
3.88(
16
)
Approved Pro
Fusion Ironworks LLC
814 Sheridan Street
3.88(
16
)
Approved Pro
160 local quotes requested
4 years of experience

Specialize in Fencing, anything from Driveway Gates, to your everyday Welding needs. I have been established and owned my own company. Please feel free to reach out directly.

"I contracted Mr. Singleton to install wrought Iron rails on my front stoop. I was told he could install the rails later in the week. Three weeks later he arrived to install the rails. When he showed up he did not even notify me that he had arrived for the install and just started installing the rails. Had he notified me that he was at my home and ready to install the rails, I would have prevented the install upon seeing the quality of the rails. Instead, Mr Singleton installed misaligned, poorly welded, poorly painted rails. In addition to the poor quality of the rails, masonry and bricks on the stoop were damaged and broken. Excess anchoring cement/sealant was not cleaned up and was allowed set up on the bricks leaving an unsightly mess. Pictures attached show the bad welds with excess welding material and splattered welding material all over the work. There were gaps in welded joints, with no attempt the grind the welds to blend them into the rails. Painting was incomplete as there were areas with bare metal and exposed primer. Upon seeing the work, I called Mr. Singleton and told him the work was unacceptable and the rails needed to be completely removed and the masonry repaired. There was no way the rails could be realigned, welded, blended and painted to look the way they should. I paid him 1/2 by check up front and the rest after the job. Immediately after he left, I requested him to return after I inspected the completed job. He would not return and I had to cancel the second check. Mr Singleton said he would come back later in the week to resolve the issue. He was an absolute NO SHOW. Communication with Mr. Singleton is hit and miss. I Do Not Recommend Fusion Ironworks, LLC or Mr Singleton for installing wrought iron railings. Be warned, the quality of materials and craftsmanship is substandard!"

Gary M on May 2025

Specialize in Fencing, anything from Driveway Gates, to your everyday Welding needs. I have been established and owned my own company. Please feel free to reach out directly.

"I contracted Mr. Singleton to install wrought Iron rails on my front stoop. I was told he could install the rails later in the week. Three weeks later he arrived to install the rails. When he showed up he did not even notify me that he had arrived for the install and just started installing the rails. Had he notified me that he was at my home and ready to install the rails, I would have prevented the install upon seeing the quality of the rails. Instead, Mr Singleton installed misaligned, poorly welded, poorly painted rails. In addition to the poor quality of the rails, masonry and bricks on the stoop were damaged and broken. Excess anchoring cement/sealant was not cleaned up and was allowed set up on the bricks leaving an unsightly mess. Pictures attached show the bad welds with excess welding material and splattered welding material all over the work. There were gaps in welded joints, with no attempt the grind the welds to blend them into the rails. Painting was incomplete as there were areas with bare metal and exposed primer. Upon seeing the work, I called Mr. Singleton and told him the work was unacceptable and the rails needed to be completely removed and the masonry repaired. There was no way the rails could be realigned, welded, blended and painted to look the way they should. I paid him 1/2 by check up front and the rest after the job. Immediately after he left, I requested him to return after I inspected the completed job. He would not return and I had to cancel the second check. Mr Singleton said he would come back later in the week to resolve the issue. He was an absolute NO SHOW. Communication with Mr. Singleton is hit and miss. I Do Not Recommend Fusion Ironworks, LLC or Mr Singleton for installing wrought iron railings. Be warned, the quality of materials and craftsmanship is substandard!"

Gary M on May 2025


Avatar for Charlie Ornamental LLC
Charlie Ornamental LLC
10712 Hollaway Dr
4.76(
17
)
Approved Pro
Charlie Ornamental LLC
10712 Hollaway Dr
4.76(
17
)
Approved Pro
Customers say: Super punctual
Recommended by 94% of Angi customers
Recommended by 94% of HomeAdvisor customers
423 local quotes requested

Our mission is to be a provider that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!

"Charlie Ornamental did an amazing job fixing my iron gate that has a broken latch. They were on time; complete the job quickly, and did it a very reasonable price. I would definitely recommend them!"

Al S on May 2025

Our mission is to be a provider that brings back the personal touch with our customers. We will build a relationship that will last a lifetime after you see our quality work. As a locally owned and operated business we feel invested in our clients and constantly strive for customer satisfaction. We won't leave until the job is done right! Call or click to schedule an estimate today!

"Charlie Ornamental did an amazing job fixing my iron gate that has a broken latch. They were on time; complete the job quickly, and did it a very reasonable price. I would definitely recommend them!"

Al S on May 2025


Grille Technologies LLC
5910 Pine Hill Road
No reviews
Grille Technologies LLC
5910 Pine Hill Road
No reviews
Free onsite estimate

M² BUILDING AND DESIGN
7407 Albemarle Dr
No reviews
M² BUILDING AND DESIGN
7407 Albemarle Dr
No reviews
Free onsite estimate

MASTER BUILDER, FINISH CARPENTER

MASTER BUILDER, FINISH CARPENTER


Tysons Service Corp
3168 B Spring St
No reviews
Tysons Service Corp
3168 B Spring St
No reviews

Jorca Contractors Inc, Open M-F 9am - 5pm
2427 Dexter Ave
3.95(
65
)
Jorca Contractors Inc, Open M-F 9am - 5pm
2427 Dexter Ave
3.95(
65
)
Customers say: Terrific value
26 years of experience

Jorca Contractors Incorporated is a general contracting company located in Silver Spring, Maryland, offering a wide range of services, including painting, drywall, carpentry, hardwood flooring, tile, carpeting and bulk trash removal. Jorca Contractors Inc. is a member of the National Wood Flooring Association and is an EPA Lead-Certified firm. Jorca Contractors Inc. works commercially and for residential means. For more information, call Carlos Menendez 301-592-1250. Jorca Contractors is insured and bonded. MHIC# 104227.

"Rick Wade, the Jorca project manager, came to our apartment to discuss the job, when we had agreed on scope of work and materials, Jorca sent an estimate for the work, and about 2 weeks later (doors were special order) came and installed and painted the doors and fixed the floor. The doors were difficult in the sense that one opening was not square. The carpenter who did the work (Luis Gonzalez) fixed the problem as part of the install and the new doors now look great and work perfectly. The floor repair was also done very well. The old damage is not at all visible. Overall it was a great experience. We have used Jorca before and will use them again."

Michael G on March 2018

Jorca Contractors Incorporated is a general contracting company located in Silver Spring, Maryland, offering a wide range of services, including painting, drywall, carpentry, hardwood flooring, tile, carpeting and bulk trash removal. Jorca Contractors Inc. is a member of the National Wood Flooring Association and is an EPA Lead-Certified firm. Jorca Contractors Inc. works commercially and for residential means. For more information, call Carlos Menendez 301-592-1250. Jorca Contractors is insured and bonded. MHIC# 104227.

"Rick Wade, the Jorca project manager, came to our apartment to discuss the job, when we had agreed on scope of work and materials, Jorca sent an estimate for the work, and about 2 weeks later (doors were special order) came and installed and painted the doors and fixed the floor. The doors were difficult in the sense that one opening was not square. The carpenter who did the work (Luis Gonzalez) fixed the problem as part of the install and the new doors now look great and work perfectly. The floor repair was also done very well. The old damage is not at all visible. Overall it was a great experience. We have used Jorca before and will use them again."

Michael G on March 2018


Naty Iron Work
6763 Mid Cities Ave
4.13(
16
)
Naty Iron Work
6763 Mid Cities Ave
4.13(
16
)
Customers say: Quality work
17 years of experience

Naty Iron Work for residential, industrial, and commercial customers. Servicing Maryland, Washington DC and Virginia area. From decorative, custom, ornamental iron design to repairs and replacements, we offer a full range of steel and iron works at affordable prices. Additional Email: info@natyironwork.com.

"Mr. Naty is a wonderful person with whom to work. He visited to secure measurements and design ideas more than once regarding the front walkway railings we wanted. He understood that we wanted the railings to provide safety while elevating the look of our front entry. The price for the work was more reasonable than other estimates received. Mr. Naty and his team installed the railings and we are so pleased with the exquisite design!!! We highly recommend Mr. Naty of Naty Iron Works!!!!"

waldemar thomas k on November 2024

Naty Iron Work for residential, industrial, and commercial customers. Servicing Maryland, Washington DC and Virginia area. From decorative, custom, ornamental iron design to repairs and replacements, we offer a full range of steel and iron works at affordable prices. Additional Email: info@natyironwork.com.

"Mr. Naty is a wonderful person with whom to work. He visited to secure measurements and design ideas more than once regarding the front walkway railings we wanted. He understood that we wanted the railings to provide safety while elevating the look of our front entry. The price for the work was more reasonable than other estimates received. Mr. Naty and his team installed the railings and we are so pleased with the exquisite design!!! We highly recommend Mr. Naty of Naty Iron Works!!!!"

waldemar thomas k on November 2024


Gateway Auto Repair
9206 Venture Ct
3.67(
6
)
Gateway Auto Repair
9206 Venture Ct
3.67(
6
)
30 years of experience

We accept all major credit cards.

"Horrible, will never recommend him ever again. They are using God and religious ways to cheat people. They not only didn’t fix my car but also damaged so many different parts of my car that I can’t even drive it anymore, my car just shut down, parked in my drive and they took 1,435 from me that my car was fixed and refused to fix or refund my money. The owner is evil and does evil work in the name of God and religion. I included photos of my car and what kind of shape I have kept it."

Mastora i on November 2020

We accept all major credit cards.

"Horrible, will never recommend him ever again. They are using God and religious ways to cheat people. They not only didn’t fix my car but also damaged so many different parts of my car that I can’t even drive it anymore, my car just shut down, parked in my drive and they took 1,435 from me that my car was fixed and refused to fix or refund my money. The owner is evil and does evil work in the name of God and religion. I included photos of my car and what kind of shape I have kept it."

Mastora i on November 2020


Java Garage Auto Repair & U-Haul Rental
2700 Hanover Pk
4.87(
15
)
Java Garage Auto Repair & U-Haul Rental
2700 Hanover Pk
4.87(
15
)
Customers say: True professional
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Family owned & operated. Financing available.

Family owned & operated. Financing available.


Bermudez Iron work
15701 Norman Dr
5.00(
1
)
Bermudez Iron work
15701 Norman Dr
5.00(
1
)
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

this is a small family company, the billing procedures are that the consumer deposits a small amount of money then when the job is done the customer pays the rest.

this is a small family company, the billing procedures are that the consumer deposits a small amount of money then when the job is done the customer pays the rest.

...
Showing 1-10 of 180

Sheet metal and ornamental metal fabricates FAQs

Sheet metal stamping and pressing are specialized manufacturing methods in which custom dies and powerful stamping presses transform flat metal sheets into precisely shaped components. These techniques form designs with embossed, coined, or flanged edges for high-quality, mass-produced parts. The process employs advanced tooling to convert raw metal into accurate, finished products efficiently while ensuring cost-effective production for both single and low-volume projects. By applying controlled force, fabricators achieve superior design accuracy and consistent quality.

Attempting to stamp metal at home is neither safe nor effective for shaping construction-grade materials. The process requires professional-grade stamping presses and custom tooling that are not replicable with household tools. Professional fabricators utilize heavy-duty machinery in controlled workshop settings to apply precise force and achieve quality results. While some metals can be bent by hand for simple tasks, attempting full-scale stamping at home poses risks of injury and subpar performance. It is advisable to rely on trained experts for secure and accurate metal fabrication.

Stainless steel stands as the most common sheet metal because its durability, weather resistance, consistent performance, and affordability make it ideal for construction projects. Its excellent resistance to damage and harsh weather conditions ensures long-lasting quality, making it the top choice among homeowners and professionals. The material’s reasonable cost range of $8 to $19 per square foot further reinforces its reliability in various building applications.

To obtain an accurate quote for sheet metal fabrication, provide detailed project specifications to a professional fabricator. Supplying exact dimensions, angles, and intended uses enables experts to produce precise estimates. Qualified fabricators utilize advanced drafting software and thorough project planning to convert your requirements into an exact quote that reflects the true scope of work. Engaging a professional ensures that all measurements and design details are accurately documented, resulting in a reliable price estimate without unexpected costs.

The homeowners guide to sheet metal and ornamental metal fabricates
From average costs to expert advice, get all the answers you need to get your job done.
backyard deck with cable railings
Mar 31, 2025
Mar 31, 2025
Use this guide to budget for cable railing costs based on factors like post and handrail materials, price per linear foot, labor, and more.
wrought iron railings on wooden steps in home
Mar 31, 2025
Mar 31, 2025
If you’re planning to install wrought iron railings, plan to budget based on type and number of railings and local labor rates.
roll of galvanized steel sheet metal fabricated to specifications
Mar 28, 2025
Mar 28, 2025
Estimate how much sheet metal costs for your project based on professional fabrication fees and average material expenses using our comprehensive guide.
welder creating a custom metal structure in workshop
Feb 1, 2022
Feb 1, 2022
HomeAdvisor's custom metal work cost guide offers average cost information reported by customers who have had a custom metal structure or object fabricated. Enter your zip code for local pricing.
construction welder welding metal components
Nov 24, 2024
Nov 24, 2024
How much does welding cost? Explore prices based on common factors like the project type, metal, and welding method with our comprehensive cost guide.
wooden staircase with glass railing in home
Apr 12, 2024
Apr 12, 2024
HomeAdvisor's Glass Railing Cost Guide provides glass banister panel, equipment, and labor prices per foot for decks, stairs, and balconies. Compare costs of plexiglass, tempered glass, frameless, and exterior glass railing systems.
Share project details to get started.