Start a ProjectJoin Our Pro NetworkLog In
Most Popular Projects
Research
Compare Quotes from up to 3 Pros

Top Insulation Contractors in Edmond, OK

Find your local pros

How It Works

  1. Answer a few questions about your home project.
  2. Within seconds, get matched with top-rated local pros.
  3. Compare quotes and choose the best pro for the job.

Featured Service Pros

Service Pros

Showing 1-13 of 13 results

Out of Network Insulation Contractors in Edmond, OK

Frequently Asked Questions

What is insulation?

+

Insulation is material that provides a barrier within a home’s walls, ceilings, and floors to regulate temperature and noise. If your home gets overly hot in the summer and cold in the winter, it’s likely not insulated properly.

Insulation efficiency is measured by R-value, which determines how resistant different types of insulation are to heat flow (or energy loss). R-values are measured by inch of thickness. The higher the R-value, the better the performance and the higher the price.

How much does insulation cost?

+

Our project data lists insulation costs between $1,400 and $6,300, but your final price will depend on the type of insulation you choose, its R-value, and how much you need.

  • Fiberglass insulation: $0.30 – $1.50
  • Blown-in insulation: $1 – $2
  • Spray foam insulation: $0.50 – $2
  • Radiant insulation: $0.20 – $1
  • Rigid board insulation: $0.25 – $1

Luckily, insulation is one of the best investments you can make in your home—it has an ROI of at least 100%, meaning you’ll likely make back what you spend in a few years or so.

What is insulation made of?

+

Insulation is made of many different materials, which can also impact the R-value needed for energy efficiency.

  • Fiberglass: The most common insulation material made from glass. Fiberglass is a skin and lung irritant, so you’ll need to wear gloves and clothing when working with fiberglass insulation.
  • Cellulose: Made from recycled paper products, plus borate for fire and insect resistance.
  • Foam: Made from polystyrene, polyisocyanurate, or polyurethane plastic. You can also install cement-based foam insulation using rigid foam boards.
  • Mineral wool: Made of fire-resistant rock wool, a mix of natural materials, or slag wool, made from a molten metal product.
  • Natural fibers: Made from various recycled natural materials, including cotton, sheep’s wool, and straw.

Where is insulation in a house?

+

If your attic is unfinished or you’ve ever demolished an interior wall, you might notice batt or spray foam insulation between the studs. Putting insulation between your walls and floors helps keep your home comfortable and your energy costs down. In addition to walls and attics, you can install insulation in your garage, in floors above vented crawl spaces, and basements.

  • Garage Insulation: $0.50 to $1.25 per square foot
  • Floor and crawl space insulation: $1 to $5 per square foot
  • Basement insulation: $1.50 to $2.50 per square foot
  • Wall insulation: $1 to $4 per square foot
  • Attic insulation: $1,500 to $6,000
  • Roof insulation: $1,500 to $4,500 or more

What are the different types of insulation?

+

There are a few types of home insulation, and they all are made of different materials— most commonly, fiberglass, cellulose, and foam. Insulation includes these materials in the following forms:

  • Loose-fill: Also called “blown-in,” loose-fill is sprayed into wall cavities, attics, and other oddly-shaped areas using special equipment. This insulation is usually made of fiberglass, cellulose, or mineral wool.
  • Batts: An affordable insulation blanket best for unfinished spaces, such as between framing, studs, or joists. They come in pre-cut sections suitable for DIY installation and are mostly made from fiberglass, though other versions are also available.
  • Rolls: Similar to batt insulation, but comes in rolls. Its make-up leaves less chance for gaps between sections and is more efficient than other types.
  • Foam board: One of the most popular insulation types that can be used almost anywhere in your home. Foam boards also have a high R-value.
  • Spray foam: Expands and hardens to fill gaps, small and large. Can be closed-cell or open-cell, but closed-cell has a higher R-value, making it more expensive per square foot.
  • Radiant barriers: Does not reduce heat flow but directs heat away from the home instead. Radiant barriers are DIY-friendly and affordable, but they won’t be as effective in the winter months.

Top Insulation Projects

HomeAdvisor Community Rating

Overall Rating:

Edmond Insulation Contractors are rated 4.9 out of 5 based on 255 reviews of 13 pros.

The HomeAdvisor Community Rating is an overall rating based on verified reviews and feedback from our community of homeowners that have been connected with service professionals. See individual business pages for full, detailed reviews.

Other Top Projects in Your Area

Other Cities in Oklahoma

If you're looking for Insulation Contractors that serve a different city in Oklahoma, here are some popular suggestions:

Find additional Oklahoma Insulation Contractors

HomeAdvisor: The nation's largest network of screened and rated pros.

Find Insulation Pros in Edmond,OK

Tell us about your project and we'll match you to the perfect pros.

Get Matched With Pros

Find Pros Nearby

Do you provide these professional services?

Find out how HomeAdvisor can help your business

See Local Demand

See Recent Leads

Recent Job Requests for Insulation Contractors in Edmond, OK

  • NewProject: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/26/23
    Location: Home/Residence
    What type of insulation do you want?: Blown-in
    Desired Completion Date: Within 1 week
    Request Stage: Planning & Budgeting
    Comment: Would like to add insulation to what is already in our attic
  • NewProject: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/21/23
    Nature of Project: Repair/Replace existing insulation
    Location: Home/Residence
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Location of Installation: Attic
  • NewProject: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/21/23
    Nature of Project: Insulation for existing home
    Location: Home/Residence
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Location of Installation: Attic
  • Project: Spray Foam Insulation Install
    Location: Edmond, OK
    Date: 01/17/23
    Desired Completion Date: More than 2 weeks
    Request Stage: Ready to Hire
    Location of Installation: Attic
    Nature of Project: Repair/Replace existing insulation
    Location: Home/Residence
    Area Description: Wall framing is exposed / unfinished
    Comment: I need the insulation removed from the floor and sprayed on the ceiling of the attic-to reduce dust and some rodent homes in the floor insulation.
  • Project: Spray Foam Insulation Install
    Location: Edmond, OK
    Date: 01/16/23
    Nature of Project: Repair/Replace existing insulation
    Location: Home/Residence
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Area Description: Wall framing is exposed / unfinished
    Location of Installation: Attic
    Comment: The dust from the old insulation is an issue. We are going with foam but need pricing
  • Project: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/14/23
    Nature of Project: Insulation for existing home
    Location: Home/Residence
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Location of Installation: Masonry walls
    Location of Installation: Non-masonry walls
    Comment: Garage walls need to have blown in insulation added.
  • Project: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/14/23
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Nature of Project: Insulation for existing home
    Property Owner: Yes
    Location: Home/Residence
  • Project: Spray Foam Insulation Install
    Location: Edmond, OK
    Date: 01/11/23
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Nature of Project: Insulation for new construction/addition
    Property Owner: Yes
    Location: Home/Residence
  • Project: Spray Foam Insulation Install
    Location: Edmond, OK
    Date: 01/10/23
    Desired Completion Date: Timing is flexible
    Location of Installation: Masonry walls
    Request Stage: Ready to Hire
    Nature of Project: Insulation for existing home
    Location: Home/Residence
    Area Description: Wall framing is exposed / unfinished
  • Project: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/04/23
    Nature of Project: Add insulation
    Location: Home/Residence
    What type of insulation do you want?: Blown-in
    Desired Completion Date: Timing is flexible
    Request Stage: Planning & Budgeting
    Property Owner: Yes
    Approximately how many square feet is the attic?: Not sure
    Comment: 1 1/2 story brick and siding home built in 1993 (2935 sq ft both floors). I'm looking for estimates on adding to existing attic insulation (accessible areas), with focus on improving comfort in master bedroom area. Also assess qualification for OG&E attic insulation rebate program.
  • Project: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 01/04/23
    Nature of Project: Add insulation
    Location: Home/Residence
    What type of insulation do you want?: Blown-in
    Desired Completion Date: Within 1 week
    Request Stage: Planning & Budgeting
    Property Owner: Yes
    Approximately how many square feet is the attic?: More than 1000 sq. ft.
    Comment: Want to add more insulation to our attic house is 2200 sq ft
  • Project: Blown-in Insulation Install
    Location: Edmond, OK
    Date: 12/29/22
    Location: Home/Residence
    What type of insulation do you want?: Blown-in
    Desired Completion Date: Timing is flexible
    Request Stage: Ready to Hire
    Comment: 500 square feet of insulation over garage
  • Project: Spray Foam Insulation Install
    Location: Edmond, OK
    Date: 12/28/22
    Location of Installation: Non-masonry walls
    Request Stage: Planning & Budgeting
    Desired Completion Date: Within 1 week
    Nature of Project: Insulation for existing home
    Area Description: No framing exposed - walls to remain intact
    Location: Home/Residence
    Comment: Standard size garage of a 1300sf home.

References Available
Tell us your zip code to view pricing & schedule
Tell us your location to view pricing & schedule
Choose your project to view pricing & schedule

Please enter valid zip.

Please choose a location.

We're sorry but the time you have chosen is no longer available.
Please select a new time below:
does not provide service to View pros who serve this zip
Enter a zip code to view which pros serve this zip.
There was an issue connecting to the server. Please try again or call Customer Service at 1-877-800-3177.
We're sorry but the time you have chosen is no longer available.
Please select a new time below:

Select your appointment type and time:

  • The pro will call you before your appointment to discuss your project.

Final Step - Confirm Your Appointment:

Confirm your appointment with on , - Change

Required
Required
Required
Required
 
 

By clicking Confirm Appointment, you affirm you have read and agree to the HomeAdvisor Terms & Conditions, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.

  • Book with Confidence
  • Cancel or change appointment at any time
 

By clicking Confirm Appointment, you affirm you have read and agree to the HomeAdvisor Terms & Conditions, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.