Get matched with top appliance (smaller size) installers and replacers in Aston, PA

"Very patient, willing to assist in getting township permits, polite, neat work, easy with work with. Quick installation of kitchen exhaust, willing to trouble shoot... Very pleased with Jim's work. I'm happy to recommend him to anyone."

"Great customer service."

"I was looking for someone specializing in metal roofing and framing to enclose a concrete front porch. We found Jacob online and were so extremely satisfied with the way he took care of every small detail from the start of getting an estimate to the finished product! I canâ t wait to have him and his crew(Ben & Stevie) to build something for us again! Theyâ re family now!ð It was as if Jesus(The Carpenter)built this for us himself! Absolutely the most beautiful work Weâ ve ever seen! So very happy we found him!! Definitely would recommend Jacob & his Crew to Everyone!!! LOVEâ £ï¸"

"Great and very prompt service. Will hire D Meyers Handyman again!"

"Lenny reached out to me right away, he came and assessed the situation. It was fixed and he even called to see if everything was good as a follow-up. "

"Manny showed up on time installed outlets quickly at a reasonable cost definitely recommend. Will be reaching out in the future for projects. I have planned thanks a lot."

"Less than 5 years ago, I spent in excess of $10,000 to have a new unit installed with a 10 year warranty. I should have seen the red flags from the very beginning. The sales representative told us additional vents would be installed and when the installation crew showed up, that did not happen. Fast forward to the present and I am now on my 4th phone call for an appointment this season, 3 days so far of not being able to work as I waited for a technician to come diagnose the problem. The 3rd. tech came last night and indicated that the work the other tech did was not for the root of the problem. (I was told in front of witnesses that the work needed to be done, was not covered under warranty, would cost me $367 and would fix my issues)In fact, the 3rd tech only made the issue worse by leaving our attic return unscrewed and overfilling our unit with Freon that the 4th tech had to remove from our system. Upon leaving last night I was told that everything was corrected. Today - my home is slowly creeping up in temperature (presently 80 degrees inside, while set to 72). The company keeps trying to sell me a "maintenance plan" and I keep reiterating to EVERY one who pushes it that we have been getting tune ups/cleanings elsewhere and will only use them for warranty issues since we have had NOTHING but problems with them."

"We reached out to Paul and his team at MLKD for help with our kitchen remodel, and they were so professional and detailed during our initial consult that we hired them right away. The MLKD team worked with us tirelessly to make the perfect design and also ensured the procurement and prompt delivery of our cabinets. They also recommended an excellent installation contactor, and we were just thrilled with the end product. Thank you Main Line Kitchen Design!"

"I would like to start with my apologies for the length of this review but I needed to get all of the information down. We have recently purchased a new home. The house did not have a washer and dryer so we needed to make this purchase. When the washer was delivered a leak in the shut-off valves was discovered when the valves were opened. I decided it best to have a plumber take a look and complete the repair on the valves. My wife was home for this repair. I was unable to make the meeting, so she met the plumber. The plumber came in and started with a quote of over $800.00 to replace two leaking shut-off valves. My wife thought that I should talk to the plumber and called me at work. After discussing with the plumber, he stated that the proposed repair was to cut a one foot square in my wall, cut the existing pipes, solder new sections of pipes onto the freshly cut existing ones that had shut-off valves already installed onto the end of them. I explained to him, over the phone, that the process of replacing the shut off valve was to unscrew the old valve from the pipe and screw a new valve onto the old pipe. No soldering was required in this approach and no hole would need to be cut. My solution would only take between 15-30 minutes to complete as to the three hour process he was proposing and should cost less than $300.00 for a plumber to complete. He explained that it was not possible to simply replace the shutoff valves as they were too old (my house was built in the 80s). I had him hand the phone back to my wife and told her that the call was hers as I was done dealing with this guy and ready to tell him to get out of our house. She stated that she would rather have it fixed now and the repair was started. About 30 minutes later, I received another call from my wife stating that the plumber was able to repair just the shut-off valve without cutting the wall. He did this by replacing only the shut-off valves. I asked her if she could see any dripping from the valves when they were opened and she replied that she was unable to verify as the hoses were not attached and that “installing” the washing machine was going to cost $300.00. I told her to hand the phone off to the plumber. I asked him how he was going to verify that his work was completed without screwing the hoses back onto the shutoff valves. He replied that the valves are not leaking and that the water to the house was turned back on. My reply was that the old valves did not leak when they were closed either. We only discovered the leak after the hoses were attached and the valves were opened. I told him that I did not want the washer “installed” but I did want him to check his work by attaching the hoses and opening the valves. I was talking to my wife while this was completed to verify that there were no more issues. She verified that the shut-off valves were not leaking so the payment was processed. When I got home, I took a look to see the finished product and noticed that the plumber screwed the hot lead to the cold supply and vice versa. I also noted that he neglected to replace the housing around the supply lines. It has been four business days since this repair and I have yet to receive a receipt for the work completed and documentation of what I paid. If you made it to the end of this review, you understand that there is no way I will ever call Michael and Son for any work in the future. I hope that my review has given you insight into Michael and Son and you decide the same."