Get matched with top doors (interior) installers and replacers in Athens, TX

"Excellent job!Erwin is amazing.Quality work.He replaced fascia & put on new gutters."

"Good guy. Takes care of everything. Gets everything clean after the job is done."

"They did a great job. Good communication. I will use them for work I need done in the future."

Maintenance professional with 20+ years of experience in mechanical systems, troubleshooting, and repair. I specialize in home repairs, fixture installs, drywall patching, and custom solutions—including welding and light fabrication. I take pride in clean, reliable work and showing up on time.\n\nI’m especially good at solving problems other contractors can’t or won’t take on. Whether it’s a small repair or a list of projects, I focus on getting it done right the first time. No sewer or major plumbing work.

I offer windows and doors installation and replacement residential and commercial, glass and mirrors

I offer a digging service. Sprinklers, propane tanks, septics tanks etc! If it needs to be dug we can handle it! We also offer plumbing service. Call today for a free estimate!

Paint & Bed Contractor – 13 Years of Professional Experience\n\nWith 13 years of hands-on experience, I provide reliable, high‑quality painting, drywall, and bed (frame/assembly/repair) services throughout the DFW metroplex and surrounding cities. My work is built on craftsmanship, consistency, and a commitment to leaving every home looking better than I found it.\n\nSkills & Services \n• Interior & exterior painting\n• Drywall repair, patching, and texture matching\n• Cabinet painting & refinishing\n• Baseboards, trims, and door repainting\n• Bed assembly, repair, and custom adjustments\n• Surface prep: scraping, sanding, caulking, priming\n• Color matching and finish selection guidance\n\nWhy Choose Me\n• Clean, detailed prep work for long‑lasting results\n• Fast turnaround without sacrificing quality\n• Respectful of your home — clean workspace, no mess left behind\n• Fair pricing and clear communication from start to finish\n• Available across DFW, small or large projects

Bullies Handyman Services\n\nWith over 25 years of experience, Bullies Handyman Services delivers reliable, high-quality workmanship you can count on. We take pride in getting the job done right the first time, with attention to detail and a commitment to customer satisfaction.\n\n✔ Skilled and experienced craftsmanship\n✔ Dependable and trustworthy service\n✔ Always on time and ready to work\n✔ Strong communication and great people skills\n✔ Affordable and fair pricing\n✔ Wide range of home repair and maintenance services\n✔ Clean, respectful, and professional on every job\n\nNo job is too small — we’re here to help keep your home in top shape.

To get the home you have always wanted, you need a good home remodeling contractor who understands your needs and can help you incorporate all the design elements you want into your space. That’s where our team of experts at HomeImprove Construction come into play. Beyond having years of experience in the field, we also have a sound understanding of what it takes to get the job done right. We don’t just rush through the remodeling process for the sake of saving time. It’s all about working alongside the customer to ensure their needs are met.\n\nWhether you want help redesigning your space or just changing out the floors in your existing space, you can put your trust in our team to get the job done right. At Home Improve Construction the customer comes first. From bathroom remodeling to kitchen remodeling, room additions, new flooring, and more, you can count on our design specialist to bring your vision to life.

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"