Get matched with top interlocking pavers for driveways & floors installers in Cripple Creek, CO

"Punctual and friendly. Crew was efficient and respectful. Showed up and finished the job as promised. Always you will find a couple small things that need adjusting after the fact for any project. They have supported their work and showed up quickly for those small adjustments. They also helped fine tune sprinklers as things became established and changed. Tons of compliments from my neighbors."

"Very professional and they get the job done with high quality standards."

"Amazing group of people, did my patio stairs and a patio for me . Might hire them again to do another patio project soon , price was reasonable and they worked hard ."

"Alfredo Landscaping’s entire crew were “Johnny on the Spot” consumate and quite capable and very professional in displaying their craft, design and workmanship in all work that was completed for me and my projects. They were very prompt, courteous and completed all work with great quality that surpassed all expectations. I am completely satisfied and very proud of the craftsmanship, attention to detail, and finished project including clean up. I will hire again and again for future projects. Thanks Alfredo and crew!"

"Amazing work, they transformed a piece of dirt on the front of my home to an extended driveway made of pavers. They also created a beautiful patio with a fire pit. Communication was great, price was reasonable. Happy customer, will call them for future projects. "

"We visited Planet Granite today in search of the perfect kitchen countertops for our kitchen...We had been looking all around Colorado Springs for a very specific design. During our search, the other places we visited were lacking in everything a customer is looking for when looking for countertops. Service, selection, pricing...We arrived at Planet Granite and were greeted by a very happy friendly face, didn't have to wait at all, then were greeted by our sales guy, Myles, who was very knowledgeable and pleasing to walk the showroom with. I was actually surprised when he told me he was fairly new to the position...He was great! We were even introduced to the owner! Its so nice to see an owner involved in the day-to-day of his business...I guess this is the result you get...Great service, great selection, great experience...:) Pretty much non-existent before this...We found our perfect piece and are super excited to have it in our kitchen! I will be recommending this place to everyone I know who is looking for countertops..."

"Chad and his team did a great job. Neat operation turning concrete into what looks like a rock/stone edging colored to meet the customer's preference. Prevents weeds and grass from growing through unlike regular rocks."

"This repair did not go very well. We purchased a home in Colorado Springs, about a year ago. We come from a region where irrigation systems are unnecessary, and I had little practical experience with them. In all fairness to the Sprinkler's Inc team, our valve manifold, which was spread over two adjacent valve boxes, was a Rube Goldberg cluster of PVC. The original failure involved a PVC tee, that just "blew out". The tech got right to work, dug up the box (129.00 charge for digging out the box... A bit steep, in my opinion, but not entirely unreasonable), and replaced the failed tee. He explained that the original tee had been a "hardware store" tee, and that this is why it failed (NOTE: I'd suggest to Sprinklers Inc that your techs probably shouldn't assume that everyone lacks materials knowledge... "Hardware store" tees... Assuming they're marked SCH-40 are required to meet the same ASTM requirements as tees from expensive irrigation repair companies...). Then... When he put pressure to the system, a threaded fitting in the downstream manifold stage blew out. The fitting appears to have been a PVC "close nipple" between the outlet on the tee and the valve... That particular tee was threaded... (like I said... Rube Goldberg...). He made a trip to the plumbing supply house (I was charged a 22.00 "trip fee"), and purchased ANOTHER PVC "close nipple" which he then threaded into the existing tee. I did get a "free" valve at this point (although I'm not sure it was brand new...). At this point, the owner arrived and someone apparently thought to check the pressure coming into the irrigation system on the house side of the backflow preventer. The pressure was reading 120 psi! Up to this point... I don't have much of a complaint. I think the work that was performed was slightly above market value in terms of cost, but I was OK with this. I don't agree with using a close nipple in this application! I had to return to the office, and asked the tech to contact me when he was finished. He calls and tells me about the overpressure issue, says "Don't turn the system on", and then tells me the total is 531.00 (I'm not sure how they got this number, as it looks like I actually got a discount on top of my "club" discount). I tell the tech that I'll settle up with the office on Monday... It's 6 PM on a Friday, and I want to have a look at the work before I pay the bill. I stop by the HW store on the way home to pick up a pressure gauge to check the water pressure. I get home... Test the water pressure, and sure enough... 120+ PSI throughout the house! I replace both of our pressure regulators on Saturday morning. Set the pressure at 60 PSI. Start up the irrigation system. All seems well. By the next afternoon, the tee with the close nipple, fractures along the entire length of the body, and we're back where we started. The following weekend, I sit down with a mechanical cad system, design, and build, a new manifold assembly, dig the boxes out, completely replace the assembly *and* all of the valves, for about 350.00. The system is back in service, and working much better than it did before I ripped it out and replaced it. Flow is improved, and I have individual flow control over each of the valves. For all of this back story... Here's where I have a problem what happened. (1) I was charged 531.00 for effectively diagnosing that I had an overpressure problem (my neighbor has since told me that the previous owner probably set the pressure this high because he was dissatisfied with how well the irrigation system was working. This is consistent with other lunacy we've seen in this house, so I'm certainly not blaming Sprinkler's Inc for the overpressure problem. The previous owner, by all accounts, was an idiot...) (2) The exact replacement of the close nipple is, however, what caused the failure after the repair. It's clear that the close nipple was torqued into the tee VERY hard... In the end, this, coupled with an aged tee (I'm being a little generous here... PVC, when not exposed to UV or high temperatures, tends to last for about a billion years...) was the primary cause of the secondary failure. This is squarely the fault of Sprinkler's Inc. (3) Nothing was fixed! My goal was to restore my irrigation system to an operational state! If the tech had taken a look at the valve/manifold assembly, and said "good lord... That's a bloody mess... For 1500.00, I'll just install an entirely new manifold assembly, and have you back in business within a few days!", there's a pretty good chance I'd have given him the thumbs up... No option like this was ever presented. The original estimate was 335.00... I suspect the overall goal was to keep the Rube Goldberg contraption in place, because this would, in the end, yield more repair work... In the end, when I account for parts *and* my time, I spent much more than 1500.00 to repair the system. The fact that I no longer need external, and very costly, maintenance calls, will hopefully justify the expense (it's been done right, this time). I've tried to write a fair review here. The techs were all very professional, and I certainly don't mean to imply that I was really ripped off, in any way. I do think Sprinkler's Inc is about 15-20% over market price on almost everything. I was willing to let this go, because the techs seem to be on the ball. I do feel like the objective here wasn't really to make a long term lasting repair to my irrigation system but was, rather to put a bandaid on a problem so that future service calls would be more likely. This is made even more obvious by their tiered pricing structure (vs. a straight parts/labor model). Not unethical, but not a business model that really works for me. Given that every tech that's been in the valve boxes has remarked that they recognize Sprinkler's Inc's use of "blue tubing", I'm led to assume that Sprinkler's Inc was partially involved in creating the cluster of band-aids to start with. There isn't any more blue tubing in my valve boxes. I'm sure there are folks that are fine with paying 500-1000/year for irrigation system maintenance, but I'm not... If you are someone that subscribes to this kind of service model, then Sprinkler's Inc is a good choice. I expect a repair to be, well, a repair... I expect to pay for itemized parts and labor, vs. a "level 5" repair. and... I expect repair to be an exception, rather than a regularly occuring event inspired by poorly executed prior repair work."

"Amazing service! I had a great experience working with Dwayne James from Olson Plumbing and Heating in Colorado Springs. I had a water line bust in my basement. I called them for an emergency plumber and Dwayne arrived in 30 minutes. He listened attentively to me as I explained the problem. Being a Master Plumber, Dwayne quickly diagnosed the water leak instantly. He explained the problem clearly and provided a detailed estimate for the repair. Dwayne did a fantastic job completing the repair in a timely manner. He was always polite, easy to work with, and kept us informed during the repair progress. He left the workspace clean and tidy. I appreciated his professionalism and expertise throughout the process. Anyone would be hard to find a better plumber or plumbing business. A first-class job. Highly recommend!"

"Very well pleased, excellent job. Began with a good layout which included suggestions based on having done other properties having similar issues (like a number of dogs living at the house that potentially get into the mulched area and destroy them). Made good selections of trees and shrubs that enhanced the property while being hardy enough for the elevation and wind conditions atop the Palmer Divide. Saved us money by suggesting that only a portion of the overall front area needed to be landscaped in order to obtain a good appearance from the road. Work was done quickly and effectively - was completed in one block of time as adequate machinery and staff were brought in to finish the job before moving on to some other project. With the new landscaping in place we shortly thereafter ask them to return and update the 300' driveway as well. The price was not low but we consider it a much more professional looking result than the other bids we have received that were slightly lower in cost."