Top-rated generator repair pros.

Get matched with top generator repair pros in Forest-knolls, CA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Generator repair pros in Forest-knolls

Avatar for Guardian Protection
Guardian Protection
4.7(
2,120
)

Serving Forest-knolls, CA and surrounding areas

In business since 1950

Free estimates

Credit card accepted

"We hired Guardian to install our security system at our Washington, DC, business. The service and quality of the work was horrible. We had cameras and an alarm system installed; it was a relatively large system. They outsource most of the work to various vendors. They could not manage their vendors; what was supposed to take a week took two months. The sales rep did not return calls, and you could never get anyone in management on the phone. Random people would show up at unannounced times. The few things that an actual Guardian employee did were they made a huge mess of our newly remodeled office and were rude to our staff. We have offices in five markets across the US and have high security at each; we have never had such a poor experience."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+11

Recommended by93%of homeowners
Avatar for JMO Electric
JMO Electric
5.0(
26
)

Serving Forest-knolls, CA and surrounding areas

In business since 2010

Free estimates

Emergency services offered

"Called Javier on a Saturday afternoon for a main breaker that overheated and died due to old age. He appeared at my house one hour later, and replaced the breaker. He could have gouged me for the Saturday call, but the bill was surprisingly reasonable. I am going to hire Javier to replace the entire panel since it is old."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+17

Recommended by100%of homeowners
Avatar for Style & Structure, INC
Style & Structure, INC
5.0(
34
)

Serving Forest-knolls, CA and surrounding areas

In business since 2002

Free estimates

Emergency services offered

"Excellent work on the project throughout. Had two huge custom windows with wood trim that needed replacement from wood rot. Also needed to replace a door and fix the flooring around them. Liron and the team did a fantastic job and it turned out better than I expected and on budget."
Recommended by94%of homeowners
Avatar for Green Bay Remodeling Inc
Green Bay Remodeling Inc
4.8(
70
)

Serving Forest-knolls, CA and surrounding areas

In business since 2012

Free estimates

Emergency services offered

"Bathroom Remodel – Disappointed I am very disappointed with the performance of Green Bay Remodeling (GB) on my bathroom remodel. Fundamentally the problems were: poor workmanship, blatant errors, lack of attention to detail by work supervisors and project management, and an inability to recognize problems and/or report them to me in a timely manner. Some examples are described below. This impacted schedule, cost (for GB, not me), the end product, and my overall mental health. There was a continuing pattern of doing poor quality work, assuming it was okay, and then fixing it when I complained. Mistakes (tile, grout, grab bar, temperature limit stop damage, cleanliness, etc.) were never admitted, and apparently it was hoped I did not notice them. This reduced my confidence in GB as the job progressed. The estimate to complete was 3-4 weeks but ended up 11 weeks. A major issue on this project was that I had a poor work crew that was replaced after 5 ½ weeks. But there are, in my opinion, as you will see, other underlying issues that compounded problems and created problems of their own. Based on my experience, the problem Is not just one worker, or a single crew, or a single manager, but more systemic in nature. Green Bay: I like their business model. You sign a contract and they commit to price before they see the complete design. I purchased and designed almost everything independently and GB installed it. They do have a large showroom from which you can purchase. They were no price-related issues throughout the contract. No hassle, no back and forth, etc. Plus you get a 1-year labor warranty for returning the completion survey! After receiving the initial contract to sign I nearly quit and went elsewhere. This was because the contract was a nine-page “pilot” which was poorly written, with many typos, really not an enforceable document. It even had language that contradicted our initial discussions, in my favor. Scary. I spoke with one of their current clients and requested the same format, 2-page contract, and I was satisfied with it. Some of the reasons for the delays were: - Workers did not show up for entire days or only worked a couple hours a day - Did not pass two city inspections, had to redo and await a total of two days for the inspectors to revisit - Two holiday weekends - The crew was changed after 5 ½ weeks, long after the problems starting occurring. - It took 3 days for a new crew to come on board. It was then I learned I learned of critical issues with the first crew’s work. The workers apparently made mistakes early on, 3 weeks into the project, and the project manager (PM) either did not recognize them or did not identify them to me until after the new crew came on board some 3 weeks later. The mistakes were with the shower floor and surrounding tile. I did have questions about peaks and valleys in the floor, but these were dismissed. The concrete shower pan and tile had to be removed and redone, ordering extra tiles at a premium with express delivery. - Damage to the temperature limit stop of the shower mixing valve during an unsuccessful attempt to diagnose a problem created by the installers. I needed to order a new part which took nearly a week to arrive. At times, PM seemed inexperienced, over-confident, and not very knowledgeable about construction practices. I attribute some problems to being accustomed to doing things a particular way, but also to a lack of construction knowledge/experience. Your only interface is with the PM so it is important for them to be knowledgeable about the construction details of the project. Recessed lighting is provided free by the contractor and I was told not to worry even though I complained that the selected lights were not appropriate. My bathroom is open to the bedroom. It has an 11 ft+ sloped ceiling. The proposed lights were wide angle (they would illuminate the high ceiling and not the room below) and also they did not gimbal, so because of the sloped ceiling they ended up pointing to the bedroom not the bathroom below. I identified gimballed, narrow-beam lights, that were indeed news to the PM, that were more appropriate, and we used these. The first crew ran out of tile, even though I ordered 6% more than the 10% overage that was initially requested, and they had to use scraps for what they thought was finishing up the wall tile work. I complained about how the shower tile was chipped around the shampoo niche and the window and was told that was the best they could do. Maybe it’s the best anyone can do, but it does look sloppy. Ultimately, I identified some wall pencils to cover the chipped areas around just the window, which they installed and it looked ok in the end. I requested that my grab bar be positioned 34 inches above the finished floor. The posted design drawings and associated text on the submission to the City reflected this. But after all the tile was installed I find out from the construction progress photos that the stud that was installed behind the shower wall tile was installed too low to meet this requirement. Granted, only an inch but I am old and tall and it makes a difference. Too bad, this was such a simple thing and there was plenty of time to correct it before the wall tile was installed. Another detail missed. I specified the best possible one-coat paint and Green Bay paid for it. The initial paint job was so poor (bare areas, light painted over) that I requested a second coat, for which I purchased the paint for both trim and walls. Vinyl plank flooring is generally laid in a random staggered pattern. This is recommended by the manufacturer and included in the installation instructions. When questioned the PM seemed to have no understanding of this. This is just something of which you should be aware if GB installs floors for you. There were problems with the shower mixing valve. Plumbing personnel spent 6 hours trying to diagnose and fix the problem without success. It was reassembled in an odd manner, not looking like the manufacturer’s website. I was told that they would come by the next day to open up the wall behind the valve to check it out. No one looked at the installation instructions and no one called the manufacturer. But I did. The manufacturer told me it was likely only a cartridge issue and gave me things for them to check. A different plumber came in the next day and sure enough got it working halfway decent in an hour, basically using the manufacturer’s guidance. He told me, and showed me, that the temperature limit stop had been damaged at some point during the installations. I ordered a new part to replace the one they damaged. More plumbing poor workmanship. Of the two faucets installed, there was one leaking drain and one leaking trap. They do a poor job with grout. I could not get the color grout I wanted because I was asked the day before it was needed and it was not available. In the end, color choice actually did not matter because the finished, sealed, grout was, tile-to-tile, a variety of colors, a variety of textures, and maybe 10% of it close to resembling my chosen color. Again, disappointing, considering that my 1989 house has 100 feet of gray tile grout that is all the same color. Ask for color seal for your grout to assure consistency of color. They used color seal of my requested grout color and it turned out fine. They did a very poor job of maintaining cleanliness: My bathroom has bottom and top openings opposite the bedroom where I slept for the project duration. The bottom was covered and zippered but not the top during the demolition and dry wall work. Dust was everywhere. When I complained, the PM pointed to the top open area and said that’s where the dust came from. No further attempt was made to cover this area for several days. I became so disappointed that got a plastic tarp and covered it myself. Even after this, every night, after the days on which they worked, my routine was to sweep out and vacuum the bedroom. In my yard, I complained multiple times about the same cleanliness issues but the same things kept happening. It was like repeatedly having to ask your child to make their bed"
Additional Photos
Bathroom Shower
Bathroom Shower
Bathroom Design
Before Our Work

+3

Recommended by94%of homeowners
Avatar for Re-Bath By Schicker
Re-Bath By Schicker
4.7(
122
)

Serving Forest-knolls, CA and surrounding areas

Free estimates

Credit card accepted

"The remodeling process from visioning to completion went extremely well. The ReBath staff helped put our thoughts into action. Demolition, construction, and fine-tuning were done with professionalism and time to give clients knowledge of the daily process. It was great that ReBath over-saw the whole process and that a project manager was often stopping by to double check the work. Caring pride and workmanship brought the bathrooms to a lovely finish."
Before
After
Additional Photos
Additional Photos
Additional Photos

+4

Recommended by90%of homeowners
...
Showing 1-10 of 309
FAQs for generator repair projects in Forest-knolls, CA

There is often some confusion about the type of work these professionals do. They only work on electrical systems such as outlets, lighting fixtures and electrical panels – they aren’t appliance repairmen.

There are three types of electricians: Master, Journeyman and Apprentice. Electrical licensing varies quite a bit by state. Some have licenses for apprentices and some do not. Some have a master’s rank while others stop at journeyman. Despite the differences, they all require a minimum amount of experience and usually classroom time.

  • Apprentice electricians aren’t usually licensed and spend 4 years learning the trade. Throughout that time, they work on a wide range of projects to learn to become a Journeyman. They’ll do basic work like installing fixtures and replacing outlets all the way to assisting in wiring a home. Regardless of the type of project, they must always be supervised by a Journeyman or Master electrician.

  • Journeymen work without supervision. In a few states, this is the highest level available and they can do all levels of work from wiring a new home to installing a light. In some states, they need a separate electrical contractor license to run a business. In places with a master’s level, a journeyman can do all work besides design new electrical systems.

  • Master electricians usually manage a shop, design new electrical systems in new construction and oversee both Journeyman and Apprentices. They typically bid new projects. Though they focus on larger projects, it’s not unheard of for a homeowner to request a Master Electrician for a house call. If you do, expect to spend up to 25% more for the visit.

Generally, you don’t tip electricians, but that’s not to say they don’t appreciate it if you do. You can offer them something to drink or eat, like coffee and donuts. Most will appreciate it if you do.

The education and certifications required to become an electrician vary by state, though they generally follow this list:

  1. Apprentice

    • Does not always require a license depending on the state.

    • Learns on the job under Journeyman and Master Electricians.

    • Usually needs 4 years on-the-job training before they can test for a Journeyman license. Many states also require a technical degree to advance.

    • Always require supervision.

  2. Journeyman

    • Needs between 8,000 to 10,000 hours of on-the-job training and usually 500 to 1,000 hours of classroom experience.

    • Can usually supervise apprentices.

    • They can diagnose and repair electrical problems.

  3. Master

    • Achieved after an additional two years (4,000 hours) working as a Journeyman and taking the Master Electrician Exam.

    • Besides diagnosing and repairing electrical systems, they also design them. In most places they run shops and inspect Journeyman and Apprentice work.

    • Not a recognized rank in all states.

  4. Electrical Contractor License is an optional license in some states for a Master Electrician to run a business. Some states have this instead of the Master license.

Electricians make an average of $26 per hour but it ranges with experience and licensing. An apprentice may make about half that while a Master Electrician may hit closer to $40 per hour. This figure represents how much they make; not how much they bill. Their salary is only one component of their costs. They must also figure in overhead, taxes, equipment, insurance and several other expenses.

Leave electrical work to the professionals. Electrical systems are complex and potentially hazardous when not handled and installed correctly. If it were easy, it wouldn’t take 4 years to become a journeyman or 6 years for a master’s license. If you are determined to forge ahead yourself, understand home electrical safety before beginning any project.Even for simple common electrical projects, a licensed pro is best. Not only is it safer, but contractors guarantee and insure their work. Hire a professional to keep your home’s electrical systems functioning properly and safely.

Use our comprehensive electrician directory page to find local, licensed contractors. You can browse ratings, reviews and pricing of top professionals in your area. Sign up to receive quotes or let us match you to an electrician near you.

The Forest-knolls, CA homeowners’ guide to generator repair services

From average costs to expert advice, get all the answers you need to get your job done.