Top-rated sheet metal and ornamental metal fabricate pros.

Get matched with top sheet metal and ornamental metal fabricate pros in Fredericksburg, TX

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Sheet metal and ornamental metal fabricate pros in Fredericksburg

Avatar for DCE Welding LLC

DCE Welding LLC

122 Short St
5.00(
1
)
•Approved Pro

DCE Welding LLC

122 Short St
5.00(
1
)
•Approved Pro
Customers say: Quick response
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers
3 years of experience

I pride myself on my professionalism, as well as my ability to complete every job to the homeowner's total satisfaction. I never leave a job unfinished, or a homeowner not 100% satisfied with my level of service - Call today!

"Great communication skills. Great quality."

Jon J on October 2022

I pride myself on my professionalism, as well as my ability to complete every job to the homeowner's total satisfaction. I never leave a job unfinished, or a homeowner not 100% satisfied with my level of service - Call today!

"Great communication skills. Great quality."

Jon J on October 2022

Avatar for Certified Welding

Certified Welding

9105 Navarro Vista
New on HomeAdvisorNew on HomeAdvisor
•Approved Pro

Certified Welding

9105 Navarro Vista
New on HomeAdvisorNew on HomeAdvisor
•Approved Pro
2025 years of experience
Free onsite estimate

I’m a master welder with a 2000 square foot shop. I am also willing to travel.Fully Certified welding inspector looking for personal or commercial outsourced work. At Whitaker Welding we exeed expectations in everything from marine/shipyard vessel welding small car ports to custom fabrication and knife forging, to certified pressure vessel welding, structural buildings. D.1104 code Inspection certified.

I’m a master welder with a 2000 square foot shop. I am also willing to travel.Fully Certified welding inspector looking for personal or commercial outsourced work. At Whitaker Welding we exeed expectations in everything from marine/shipyard vessel welding small car ports to custom fabrication and knife forging, to certified pressure vessel welding, structural buildings. D.1104 code Inspection certified.

Legacy Lifts LLC

6556 State Highway 198
4.00(
1
)

Legacy Lifts LLC

6556 State Highway 198
4.00(
1
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Legacy Lifts is a Texas-based company producing innovative, state-of-the-art residential cargo lifts, passenger lifts, commercial lifts and boat products that are sold, installed and serviced by local distributors. We are committed to making elevated living easier. If you live or work in a multi-story building, you probably already know what a hassle it can be to make multiple trips up and down the stairs. Even simple tasks like taking out the trash or bringing up the groceries can be exhausting.

Legacy Lifts is a Texas-based company producing innovative, state-of-the-art residential cargo lifts, passenger lifts, commercial lifts and boat products that are sold, installed and serviced by local distributors. We are committed to making elevated living easier. If you live or work in a multi-story building, you probably already know what a hassle it can be to make multiple trips up and down the stairs. Even simple tasks like taking out the trash or bringing up the groceries can be exhausting.

T-Bar Fence Inc

1912 Peyco Dr S
4.63(
30
)

T-Bar Fence Inc

1912 Peyco Dr S
4.63(
30
)
Customers say: Quick response
Recommended by 90% of Angi customers
Recommended by 90% of HomeAdvisor customers

T-Bar Fence has been providing the Dallas/Fort Worth metropolitan area with quality craftsmanship and expertise in the fencing industry since 1981. T-Bar Fence installs custom wood, chain link, ornamental iron and decorative fences for residential and commercial projects. T-Bar Fence also stains and reconditions existing fences and is accredited with the Better Business Bureau with an A+ rating.

T-Bar Fence has been providing the Dallas/Fort Worth metropolitan area with quality craftsmanship and expertise in the fencing industry since 1981. T-Bar Fence installs custom wood, chain link, ornamental iron and decorative fences for residential and commercial projects. T-Bar Fence also stains and reconditions existing fences and is accredited with the Better Business Bureau with an A+ rating.

KBK Construction

PO Box 132
2.00(
1
)

KBK Construction

PO Box 132
2.00(
1
)
18 years of experience

1-I use licenesed sub-contractors for electrical and plumbing 2-KBK-C is a small hands on company employing me and two helpers 3-I do a lot of work on the outlying ranches so I pull a trailer with me containing a wide variety of tools 4-Certified Apollo Gate Opener installer 5-Trip billing - Labor & $1.00 per mile paid one way out of the Junction city limits 6-Wages - Craftsman-$25.00 - $35.00hr & helper-$15.00 - $20.00hr 7-Free bid proposals 8-Haul off available 9-Local Owner - Emergemcy serice available at all hours 10-I will work with Home Owner with thier assistance with the project if they so choose 11-I am Bondable

1-I use licenesed sub-contractors for electrical and plumbing 2-KBK-C is a small hands on company employing me and two helpers 3-I do a lot of work on the outlying ranches so I pull a trailer with me containing a wide variety of tools 4-Certified Apollo Gate Opener installer 5-Trip billing - Labor & $1.00 per mile paid one way out of the Junction city limits 6-Wages - Craftsman-$25.00 - $35.00hr & helper-$15.00 - $20.00hr 7-Free bid proposals 8-Haul off available 9-Local Owner - Emergemcy serice available at all hours 10-I will work with Home Owner with thier assistance with the project if they so choose 11-I am Bondable

STU'S CUSTOM METAL

209 Grand St
No reviews yet

STU'S CUSTOM METAL

209 Grand St
No reviews yet
46 years of experience

Since 1979, we have been servicing the Highland Lakes area with the best in quality service. We specialize in metal fabrication, structural steel, metal stair cases, ornamental iron, boat houses, and docks. With over 100 years of combined experience, you can be assured that we can meet any of your needs. Give us a call today! We are here for YOU. We utilize all the major application methods. Saturday hours are based on availability.

Since 1979, we have been servicing the Highland Lakes area with the best in quality service. We specialize in metal fabrication, structural steel, metal stair cases, ornamental iron, boat houses, and docks. With over 100 years of combined experience, you can be assured that we can meet any of your needs. Give us a call today! We are here for YOU. We utilize all the major application methods. Saturday hours are based on availability.

Grille Technologies LLC

5910 Pine Hill Road
No reviews yet

Grille Technologies LLC

5910 Pine Hill Road
No reviews yet
Free onsite estimate

Hooten's Hardware

Hwy 69 N
4.60(
5
)

Hooten's Hardware

Hwy 69 N
4.60(
5
)
Customers say: Quality work
Recommended by 100% of Angi customers
Recommended by 100% of HomeAdvisor customers

Special financing on Toro lawn products. Sales and service on Toro, Echo, Stihl, and Husqvarna. Master Case knife dealer - over 750 Case knives in stock

Special financing on Toro lawn products. Sales and service on Toro, Echo, Stihl, and Husqvarna. Master Case knife dealer - over 750 Case knives in stock

T J Burdett & Sons Recycling

570 Interstate 45 N
No reviews yet

T J Burdett & Sons Recycling

570 Interstate 45 N
No reviews yet
Free onsite estimate

T J Burdett & Sons Recycling

T J Burdett & Sons Recycling

J Dub's Handyman Service

280 Backacre Rd
No reviews yet

J Dub's Handyman Service

280 Backacre Rd
No reviews yet
9 years of experience

No job too big or too small. Most jobs not billed until work is complete and to owners satisfaction.

No job too big or too small. Most jobs not billed until work is complete and to owners satisfaction.

...
Showing 1-10 of 112
FAQs for sheet metal and ornamental metal fabricate projects in Fredericksburg, TX

Sheet metal stamping and pressing are specialized manufacturing methods in which custom dies and powerful stamping presses transform flat metal sheets into precisely shaped components. These techniques form designs with embossed, coined, or flanged edges for high-quality, mass-produced parts. The process employs advanced tooling to convert raw metal into accurate, finished products efficiently while ensuring cost-effective production for both single and low-volume projects. By applying controlled force, fabricators achieve superior design accuracy and consistent quality.

Attempting to stamp metal at home is neither safe nor effective for shaping construction-grade materials. The process requires professional-grade stamping presses and custom tooling that are not replicable with household tools. Professional fabricators utilize heavy-duty machinery in controlled workshop settings to apply precise force and achieve quality results. While some metals can be bent by hand for simple tasks, attempting full-scale stamping at home poses risks of injury and subpar performance. It is advisable to rely on trained experts for secure and accurate metal fabrication.

Stainless steel stands as the most common sheet metal because its durability, weather resistance, consistent performance, and affordability make it ideal for construction projects. Its excellent resistance to damage and harsh weather conditions ensures long-lasting quality, making it the top choice among homeowners and professionals. The material’s reasonable cost range of $8 to $19 per square foot further reinforces its reliability in various building applications.

To obtain an accurate quote for sheet metal fabrication, provide detailed project specifications to a professional fabricator. Supplying exact dimensions, angles, and intended uses enables experts to produce precise estimates. Qualified fabricators utilize advanced drafting software and thorough project planning to convert your requirements into an exact quote that reflects the true scope of work. Engaging a professional ensures that all measurements and design details are accurately documented, resulting in a reliable price estimate without unexpected costs.

The Fredericksburg, TX homeowners’ guide to sheet metal and ornamental metal fabricates

From average costs to expert advice, get all the answers you need to get your job done.

See all articles
  • construction welder welding metal components

    Explore what affects welding costs, including project size, metal type, and method. Learn how labor, materials, and design choices shape the final bill.

  • wooden staircase with glass railing in home

    HomeAdvisor's Glass Railing Cost Guide provides glass banister panel, equipment, and labor prices per foot for decks, stairs, and balconies. Compare costs of plexiglass, tempered glass, frameless, and exterior glass railing systems.

  • welder creating a custom metal structure in workshop

    HomeAdvisor's custom metal work cost guide offers average cost information reported by customers who have had a custom metal structure or object fabricated. Enter your zip code for local pricing.

  • roll of galvanized steel sheet metal fabricated to specifications

    Estimate how much sheet metal costs for your project based on professional fabrication fees and average material expenses using our comprehensive guide.

  • wrought iron railings on wooden steps in home

    If you’re planning to install wrought iron railings, plan to budget based on type and number of railings and local labor rates.