Top-rated baseboard installers.

Get matched with top baseboard installers in Norman, OK

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Baseboard installers in Norman

Avatar for JLS Remodel & Construction
JLS Remodel & Construction
5.0(
13
)

Serving Norman, OK and surrounding areas

Approved

In business since 2019

Small jobs welcome

Credit card accepted

"We actually hired JLS to do multiple projects: expand our laundry room (removal of a load bearing wall was required), repair a cracked joist in the attic space over our garage, and install a vented range hood to replace our old recirculating hood. From the first estimate, to the completion, we could not be more pleased. The owner is very conscientious and wants to ensure that each step of the job is completed to the highest standards. Communication was outstanding and there were zero costly "surprises". He and the gentleman that worked for him were both very friendly. They went above and beyond to keep the construction mess to a minimum and performed a thorough clean-up at the end of every workday. For all of the work that we had done, we felt that the price was quite fair and we will not hesitate to call JLS for future projects that are outside of our comfort zone or time constraints!"
Kitchen
Burned Kitchen smoke and heat damaged house
Burned Kitchen smoke and heat damaged house
Burned Kitchen smoke and heat damaged house
Burned Kitchen smoke and heat damaged house

+68

Response time1 day
Recommended by100%of homeowners
Scully's Wood Works and Home Improvement
5.0(
3
)

Serving Norman, OK and surrounding areas

Approved

In business since 2012

Free estimates

Credit card accepted

We're a local family owned and operated company with over 22 years of industry experience. We value honesty and integrity, and stand behind our work. We specialize in cabinetry installation, custom closets, interior trim and decorative molding installation, interior and exterior painting, and a variety of related projects. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building long-term relationships with our clients and guarantee your satisfaction!

Recommended by100%of homeowners
Avatar for Handyman Matters Of Oklahoma City
Handyman Matters Of Oklahoma City
4.6(
471
)

Serving Norman, OK and surrounding areas

In business since 2005

Credit card accepted

"This was my first time using a contractor based on an Angie?s List listing, and though I was a bit apprehensive about it, the Angie?s List service did what I was hoping that it would do: it ensured a very smooth contractor experience.
Jill at Handyman Matters corresponded with me via email, which was excellent. That allowed a minimum amount of time needed for coordination. She was also very flexible on the installation date because I was awaiting the arrival of the special-ordered garbage disposal at the local Lowe's outlet. Once I picked up the item at Lowe's, I emailed Jill to let her know that I was ready to schedule the installation. She was able, amazingly, to schedule it for two days later.
Armando showed up right on time at our home to install the component, after first uninstalling the old disposal. He had a difficult time fitting the new disposal onto the existing mounting ring (which was also practically brand-new, which is why we chose not to install the new mounting ring that came with the new disposal). He also was required to install the cord from the old disposal onto the new disposal (we both knew that ahead of time).
There was one point where Armando could have left the new disposal "precariously mounted" and that would have been adequate. However, he remarked that "he wanted to do it right" and continued to wrestle with the installation of the new disposal on the mounting ring until he finally got a good, snug fit. I was VERY impressed with that particular facet of Armando's installation process.
I knew going in that there would be a one-time $50 service charge included in the final bill, and though I am unsure of what that is all about, I paid it without hesitation; the price paid match the price quoted before the installation at the time of scheduling the appointment. My gut reaction is that the service charge allows the company to remain competitive with other similar companies. Other than the one-time service charge, I think that the final bill was fair, charging the amount of labor that was required (2 hours). Part of that time was filled by Armando having to visit our local hardware store to pick up a needed extender tube with clamps because he had to cut off part of the existing tubing to fit the new disposal correctly. Once again, I was very impressed by his desire to "do the job right." He could have left part of the drain tube resting against the disposal, but I was very pleased to see that he ensured that this did not happen (thus preventing the disposal from vibrating against the drain tube during operation).
Finally, Armando did a cleanup of the work area and then checked the new disposal for proper operation. He also gave me some much-needed tips about the use of the new disposal that should extend its life considerably.
Oh . . . I also asked Armando to take a quick look at one of our three toilets that had leaked water onto the floor a couple of weeks ago (we had shut off its water supply so that Armando could then look at it for us). He did a thorough inspection of it and then turned on its water supply. We both watched for any leaks but could find none. Armando told me what to watch for and how to let Handyman Matters know the specifics if it were to leak again. Basically, he restored the use of this toilet to us without any additional charge, etc. by doing a professional re-enabling of its water supply and then monitoring it briefly for leaks.
We will definitely use Handyman Matters again in the future whenever the need arises and were very impressed with their quality of service. We have nothing negative to say about them, which is a rarity in today's business environment. We will also always request that Armando be our service technician for any future visits if he is available.
"
Recommended by95%of homeowners
...
Showing 1-10 of 139
FAQs for baseboard installation projects in Norman, OK

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.