Get matched with top roofing installation & roof repairers in Rockport, TX

"They did a very good work. They did all of our company's roofing. They were a good company. We would hire them again for sure."

"James and the entire Bondoc team were the best! When James initially came out to look at my roof, he was very honest and answered all of my questions. He came back with three different estimates for three different price points within my budget and came out again to show me different tile samples to choose a new color for my roof. The installation only took one day, and it looks fantastic! They cleaned everything up and were done on time. I couldn't be happier with who I chose for this project."

"QRS did an excellent job on my roof. Matt Terry is the best. He came to my door and said I needed new roof and that he could help me get it done. So I took the chance and trusted him and he was wonderful. He did all the work with State Farm and I just sat back. I got full replacement on roof, gutters and screens and Matt made that happen. All this was done just before Christmas, so I can relax and enjoy the holidays. Thanks again Matt and QRS.."

"Everything was great! We love the barn door that was custom built for us. Great Job!"

"It went really well .. I'm out of state and couldn't be there, but my realtor attended and a thorough inspection was performed. It always makes everything simpler, when you’re dealing with professionals! We’d just signed a contract on a house and needed and professional inspection done, quickly. PJM was very responsive to our needs, they were out within 2 days of request, and didn’t overcharge us for the inspection of our new home .. and with short notice too, they really covered a lot! Identifying and expertly assessing some items we’d already noticed, but more importantly, a myriad of issues we had not! Devon Christopher was our Inspector, and he performed a very thorough inspection for us. In his inspection, he examined all of the “surface” type things you’d anticipate but he also referred us to the appropriate professional for each issue identified – plumber, electrician, pool company – all of which is a very logical and analytical approach to what was needed. Moreover, he provided a very detailed written inspection (it’s 96 pages long!), which coupled with photos, will make our task easier in identifying and getting things corrected and/or repaired. Devon provided us so many pictures of the issues identified, which is a huge help in supporting his findings, along with excellent "going forward" advice and recommendations, for "checks and maintenance" of systems and equipment to prevent costly breakdowns in the futures. Everything from filters on various home appliances and equipment, to home laundry appliance issues and the pool lining for possible recoating in the near future; all of this important to us and ALL of it VERY valuable information to our purchase, since we've a) never lived in Florida before, and b) never had an inground pool! So, from professional handling, quick response time to meet our schedule, and a very reasonable price for their service, I’d highly recommend PJM. If you’re looking for a proper, thorough inspection, it’s good to leave that to professionals."

"I can't say enough about the guys at Radiant Roofing. I had purchased a new (older) home and it needed a new roof. I know nothing about roofing or anything of the sort. They came out the same day I called and they answered all my questions so that I could actually understand what I needed and what I was paying for. <strong> They were very courteous and professional</strong>. Shane oversaw the whole process himself. He made sure the jobsite was clean and it was even completed before they said it would be. I have never written a review like this before, but I was so pleased after the whole home buying nightmare, <strong>this process was actually pleasant.</strong>"

"Serviceman was right on time. Before cleaning the inside of my fireplace, as well as the gas logs, he laid a blanket down so no dust could get on my floor or furnishings. He noticed that the logs were set a little too close to the front, then adjusted the log rack so the gas could flow better through the logs. He also noted that the gas pipe was at the correct length to the logs. Next, he went outside and did an inspection of the chimney by getting on the roof. Except for a slight crack in the caulking around the cap there were no problems. The caulking was not something that required repair at this time. This serviceman was very professional in doing his job, in cleaning up after his inspection, and in the information he gave. I will call this company again."

"To begin with, I contacted 4 different roofing companies (all highly rated on Angie's List). One of these used a satellite system for estimating the roof area (measured in and quot;squaresand quot;, 1 square = 100 sq ft.) Three of the four area estimates - including the one that used the satellite system - quoted roof areas that were much higher than the fourth. So I took the satellite image - which had linear dimensions on it, and added a factor for the roof pitch (basic trigonometry) and what I found was that the fourth estimate, which happened to come from Bruce Bethke, was nearly right-on. <br /> I have no idea what was up with the other three roofers' estimates (bad at math?), but they all enjoy great reputations on Angie's List... <br /> Bruce suggested that I think about a metal roof and offered me a and quot;screw-downand quot; option (where the fastening screws pass through the metal surface before anchoring in the plywood decking below) and a and quot;standing seamand quot; option (where the metal roof panels are clipped into hidden fasteners leaving the metal surface undisturbed.) NOTE: This second type of roof is referred to as and quot;standing seamand quot;, but it consists of panels with pre-fabricated seams that lock together as opposed to a and quot;trueand quot; standing seam roof which is installed with a power crimper that creates the seams onsite by bending the flat panels together. The original and quot;standing seamand quot; roof is significantly more expensive. While there may be a marginal benefit to the power-crimped roof, the pre-fabricated panels have a good track record. <br /> The more I learned about modern metal roofs, the more I wanted to go that route. They have 2 major benefits: (1) energy efficiency, and (2) durability. <br /> The metal roof (including colored metal roofs) are much more reflective of the sun's radiant energy, so they don't get as hot as asphalt roofs of any color. Furthermore, a metal roof has barely any heat capacity at all; when the sun goes down it has no stored heat to give off, whereas an asphalt roof heats to well over a hundred degrees fahrenheit, and cools down slowly - in the process radiating heat off to the atmosphere - and into the house! Since replacing my roof I have noted that the heat pump barely ever runs between 7 or 8 pm and 10 or 11 am, whereas with the asphalt roof the heat pump ran long and often throughout the entire night and morning. Because the metal roof saves so much energy it has earned an energy tax credit for the year it gets installed. <br /> The roof is also more durable - so much so that it meets a U.L. standard for resistance to wind and hail damage - which earns a discounted rate for homeowner's insurance in the state of Texas. <br /> Lastly, the roof looks great. Neighbors actually comment on it, and several have said they'd like to and quot;go metaland quot; when the time comes to replace their asphalt roofs. <br /> Once I decided to go with a metal roof, I ran the two options by a home inspector who urged me to go with the standing seam rather than the screw-down option. He said that even though it costs more initially, the additional cost is more than made up by the fact that the standing seam roof does not require screws to be inspected and replaced periodically. And the possibility of leaks is drastically reduced because there should be very few if any penetrations through the metal surface of a standing seam roof when installed properly. <br /> Back to Bethke Roofing. Bruce Bethke earned my trust with his straightforward estimate, his suggesting the metal roof, and giving me the full facts up front. He's a pretty easy-going guy besides, and I found dealing with Bruce - and his crew to be a very good experience. During the job Bruce suggested replacing the stack roof vent with louver vents on the sheer face of the adjoining wall (parts of the roof are single-slope adjoining a sheer wall face). That was done at a minimal additional cost. His suggestion improved the aesthetics of the roof, eliminated a potential water leak, and improved the attic ventilation. He even gave me some advice on a non-roof drainage issue I had - and his suggestion has proven completely effective, and much easier to accomplish than what I had originally planned. <br /> I heartily recommend Bethke roofing to anyone who needs a roof!"

"Perfect. I enjoyed getting to sit in the storm shelters at their showroom to help with size selection. After signing up for the install, they connect you to an online portal to manage the contract and to update building permit number, etc. Installation was prompt and clean."

"We had Mr. Waters replace our roof several years ago and he and his crew did a wonderful job. We have an arbor attached to the roof and there were some signs of leaking into the outside soffit. I called and Donnie sent a man out the next day to look at it and repair the caulking. He would not take any money but said it was part of their warranty. It's a great service provider who will stand behind their work. <br /> Linda C. <br />   <br />"