Top-rated doors (interior) installers and replacers.

Get matched with top doors (interior) installers and replacers in Vacaville, CA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Doors (interior) installers and replacers in Vacaville

SGB Inc.
5.0(
6
)

Serving Vacaville, CA and surrounding areas

Approved

In business since 2015

Free estimates

Credit card accepted

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.\n

Response time2 days
Recommended by100%of homeowners
RSF Construction Inc.
1.0(
1
)

Serving Vacaville, CA and surrounding areas

Approved

In business since 2019

Free estimates

Credit card accepted

RSF Construction Inc. is a leader in providing our customers with the highest quality service in an honest, efficient, and professional way. Our pledge is to create successful relationships with our customers, employees and community by building trust, treating every project with the utmost integrity and exceeding expectations. We look forward to working with you!

Avatar for Right Way Garage Doors
Right Way Garage Doors
4.8(
518
)

Serving Vacaville, CA and surrounding areas

In business since 1980

Free estimates

Emergency services offered

"We worked with both Jake and Ken. Jake was punctual, came in and measured stuff, and gave us the bad news we kind of expected - our current doors not only were cheap and cheerful, but the actual space under them was measured badly. On top of that the single door was basically not a real parking space - unless you were driving a clown car in there, there was no space. The sad truth was that if we put in the doors we originally planned - cheaper ones - that the house would look bad, and they'd need to be painted anyway. So, to match the house's other doors, they suggested expensive but long-lasting doors that they could make fit the space, a new assembly that actually works reliably, and on top of that install it in a day *and* make it fit the very awkward space between the ground and the doors. On top of that they created a dummy door for the already-useless door so that it'd look real, seal in nicely, yet not need the assembly. The work itself was done cleanly, beautifully and on time. It looks great. The extra money for the doors that we got, thick cedar ones (I think) that smell great and look great. They automatically worked with my car with barely any effort, and they move beautifully. The house looks great now. One thing that really makes Ken and Jake - apart from stellar work - stand out is their communication. Jake came by twice to make sure we were ready to go. Ken emailed and called to make sure we were happy, and to make sure the job looked well-done. There's a lot of pride in what they do, and they're fair and honest people who work hard to provide, well, the kind of thing you'd expect from someone this high-end. But even then, the cost wasn't ridiculous for what we got. It's great. It'll last for a long time."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+238

Recommended by95%of homeowners
Avatar for 1A Garage Doors
1A Garage Doors
4.9(
281
)

Serving Vacaville, CA and surrounding areas

In business since 2007

Free estimates

Emergency services offered

"Daniel came out and replaced the seal on the bottom of our garage door which mice had chewed through. Our door was 20+ years old so I expected the track that the seal went into to be outdated and it was, I couldn't even find it on Youtube, so a new track was required for the new seal to fit into. Parts and labor for this 8' metal track was only $50 in addition to the quote for the actual seal. I priced this out beforehand with competitors and I must say the pricing for everything with 1A was the lowest and very fair. I will definitely call 1A when needed again. Daniel...friendly, hard working guy with no upsell. Felt very comfortable with him. Could not have asked for a better man to help us out. Honestly. Thanks much! Rick"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+128

Recommended by98%of homeowners
Avatar for Amsterdam Woodworks
Amsterdam Woodworks
4.9(
99
)

Serving Vacaville, CA and surrounding areas

In business since 2005

Free estimates

"We met Arno at a Home Show in Sacramento right after we had purchased a "Fixer Upper". We were so impressed with his workmanship that as we planned our remodel, we then had Amsterdam Cabinets build custom cabinets for our entire home. They are Beautiful! He's the Best!!"
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+5

Recommended by100%of homeowners
Avatar for ELK GROVE OVERHEAD DOORS
ELK GROVE OVERHEAD DOORS
4.7(
20
)

Serving Vacaville, CA and surrounding areas

In business since 1975

Emergency services offered

Credit card accepted

"The garage door manufacturer required a $2500 deposit and was involved with the garage remodel starting June 2013 regarding measuring the openings while framing/stucco/drywall was in progress. We did request a vertical V grooved exterior appearance.
Manufacturing and Install:
The doors they manufactured and brought to the home were a manufactured paint-grade manufactured wood doors, looked VERY heavy & bulky (qualities we had never requested)  otherwise nothing special from the outside. The windows were single-pane.When they installed them I noted that the doors did not seal around all the edges equally, leaving gaps (1/2-3/4") along an area of the side/top of the doors, that will allow for small rodents or leaf blower projected debris to enter the garage readily. Elk Grove Overhead Doors made some adjustments, then blamed the situation on the stucco/framing and stated it is the best they could do, leaving me with uneven significant gaps around both doors.
Now after the initial rain exposure ( moisture only since they are protected by an eave)  it ALSO appears the exterior surface of the doors is starting to have blister-like but deep bubbles ( I would guess delaminations of the manufactured wood product) in several small areas, and the wood appears to be delaminating (flaking superficial layers at several of the V-grooves.
Openers and door function:
When they attached the openers my wife and I were alarmed how loud and 'clunky' the doors/openers were! Sounds like a castle draw-bridge being retracted with big chains. Since our garage doors are near our neighbor's master bedroom we had erroneously expected the new doors to be less noisy than the older doors we had. They installed chain drives ( instead of belt drives) which they stated they needed to use because of the heaviness of the doors. They stated most of the noise was the chain drive.Again, we never asked for  heavy doors. It appears as if  the doors are striking the middle rail when initially opening though they assured us it only looked that way. I was dismayed that these type of details were not worked out on paper before manufacturing and install since they were involved early in the garage remodel.
The wheels in the tracks intermittently squeal and sound as if they are not properly riding in the rails.
Corrective actions:
 
Initially after install and before full payment was made Elk Grove Overhead Door came back and "adjusted" the doors assuring us that they were fine and were not striking the railing and that they were not responsible for the door and wall leaving gaps.  Since they were been paid in full, they responded to my telephone call and promised to come out and take a look what they could do to make us satisfied with their product. They were a no-show for that appointment; since then I have made several telephone calls to John with our concerns and dissatisfaction with the doors and the noisy functioning; he has been apologetic and verbally responsive with promises that they would call me back the following day or week to set up a time to come out to make things right.  Several excuses later, (only after I called them and reminded them they had not called back to schedule repairs as they had promised) and 7 months after installation and payment we have new noisy doors that don't seal, sound like they are breaking/not functioning right and now the material they are made out of appears to be blistering and flaking. Wondering how soon I will need to replace the opener or door??
Nice polite people, but I would avoid Elk Grove Overhead Door at any price; my opinion is the new acquired headaches and expenses that come with the doors are not worth it.
"
Recommended by89%of homeowners
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Vacaville, CA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for The Door Brothers & Construction
The Door Brothers & Construction
5.0(
5
)

Serving Vacaville, CA and surrounding areas

In business since 2018

Free estimates

Credit card accepted

We are committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business. We are a locally owned and operated company. Our services are customized to the individual project, paying close attention to the details of each project that we're involved with. We pride ourselves on the quality of our work as well as our commitment to outstanding results. We look forward to building lasting relationships and guaranteeing your satisfaction!\n

Doors
Doors
Doors
Doors
Doors

+2

16 neighbors recently requested a quote
Showing 1-10 of 50
FAQs for doors (interior) installation and replacement projects in Vacaville, CA

If your existing frame is in good shape, you can replace an interior door without changing the frame. This is a budget-friendly option because it saves on the cost of removing and installing a new frame. By choosing a slab door that fits your current frame, you'll save on labor and materials. Just make sure the new door matches the old one's dimensions for a smooth replacement.

Standard interior doors are 80 inches tall and range from 28 to 32 inches wide. Interior doors vary from 24 to 36 inches wide, depending on their purpose and the available space. Building codes require interior doors to be at least 80 inches tall and 24 inches wide. Knowing standard sizes helps you select a new door that fits properly in your existing opening.

It costs $600 to $2,000 or more to move an inside door. The total price depends on your location, the type of door, and materials needed to complete the project. Moving an interior door requires walling up the leftover space and opening up a new wall where you want the door to go instead. You’ll also want to plan for the expense of framing the new wall opening and adding trim.

Exterior door installation costs an average of $1,175, with a typical range of $525 to $1,800. The higher expense compared to the cost of interior doors comes from the need for exterior doors to be weather-proofed and they are often made of thicker, more durable materials. The associated exterior hardware must also be able to withstand harsh weather, so these cost more as well.

It costs between $300 to $2,500 to make a doorway wider on average. However, the wider you need the space to be, the more it will cost. Some homeowners choose to widen interior doorways to make the house more wheelchair accessible. In order to be wheelchair accessible, an interior door needs to be at least 32 to 36 inches wide. Also, some older homes just have narrow doorways due to the nature of how homes were built differently many decades ago.

It takes between two to five hours for a professional door installer to install an interior door, depending on complexity and materials. A pre-hung door typically takes around two hours, and larger doors like double French doors can take up to five hours. If you’re doing the project yourself, expect it to take a little longer than that, especially if you have little to no experience completing this type of project. Keep in mind that a pre-hung door can be installed about an hour or two faster than a slab door.

The Vacaville, CA homeowners’ guide to doors (interior) installations and replacements

From average costs to expert advice, get all the answers you need to get your job done.