Get matched with top interlocking pavers for driveways & floors installers in Yoder, CO

"Absolutely superb. 1. The owner, Dave, arrived on time for the initial review and estimate. 2. The estimate was very acceptable since I reviewed three bids. 3. His approach and understanding of what I wanted was on target. I had several follow-up questions and he got back to me right away and answered all the questions. 4. Date of the concrete pour his team showed up on time. Dave was there to ensure his team understood what needed to be done. 5. The entire team got to work and then the concrete delivery company arrived on time. The issue here is what was ordered was not delivered. This is not Dave's fault. But he worked with the company to complete my project. Sadly the concrete company refused to work with Dave to correct their oversight. 6. The project was completed and looks great. Dave and his team knows how to do it right and respects the customer. 7. If I have another project, Omega Landscaping and Concrete will be the first one I call."

"First off Angi exposed me to great talent. Patterson Landscapes was fantastic, the pre-work thru proposal was top notch. The crew was outstanding, cleaned up all the work spaces and left the yard looking great. I would recommend Tayler and Patterson Landscapes. All the neighbors have already commented how nice the stone work and cleanup was executed. Can't wait for the high desert yard green up!"

"Punctual and friendly. Crew was efficient and respectful. Showed up and finished the job as promised. Always you will find a couple small things that need adjusting after the fact for any project. They have supported their work and showed up quickly for those small adjustments. They also helped fine tune sprinklers as things became established and changed. Tons of compliments from my neighbors."

"Amazing group of people, did my patio stairs and a patio for me . Might hire them again to do another patio project soon , price was reasonable and they worked hard ."

"The best contractor I’ve ever been associated with..he did everything he said and never questioned my opinion and did everything I asked to satisfy my request ..always followed up and was on schedule..A.Plus"

"This was a wonderful experience.  From the selection of the granite to the measuring to the installation was flawless.  I will not use any other granite company!  Responsiveness and project management great. <br />"

"Went great from start to finish. My wife is happy with our new patio and my dogs and I love our new backyard. Initially the grass struggled to take root around the edge of the patio because of my dogs, I was able to reach out to C&M and they were quick to respond and help me fix a mess I created. Great crews, great owner who ttuly cares about customer satisfaction and putting out a great finished product."

"A Better Edge did a superb job. Looks fantastic. Then I had Garage Force come in a cover my ramp and tiles with a polyurea and the cpmbination looks amazing. Everyone that has seen the patio like the results."

"This repair did not go very well. We purchased a home in Colorado Springs, about a year ago. We come from a region where irrigation systems are unnecessary, and I had little practical experience with them. In all fairness to the Sprinkler's Inc team, our valve manifold, which was spread over two adjacent valve boxes, was a Rube Goldberg cluster of PVC. The original failure involved a PVC tee, that just "blew out". The tech got right to work, dug up the box (129.00 charge for digging out the box... A bit steep, in my opinion, but not entirely unreasonable), and replaced the failed tee. He explained that the original tee had been a "hardware store" tee, and that this is why it failed (NOTE: I'd suggest to Sprinklers Inc that your techs probably shouldn't assume that everyone lacks materials knowledge... "Hardware store" tees... Assuming they're marked SCH-40 are required to meet the same ASTM requirements as tees from expensive irrigation repair companies...). Then... When he put pressure to the system, a threaded fitting in the downstream manifold stage blew out. The fitting appears to have been a PVC "close nipple" between the outlet on the tee and the valve... That particular tee was threaded... (like I said... Rube Goldberg...). He made a trip to the plumbing supply house (I was charged a 22.00 "trip fee"), and purchased ANOTHER PVC "close nipple" which he then threaded into the existing tee. I did get a "free" valve at this point (although I'm not sure it was brand new...). At this point, the owner arrived and someone apparently thought to check the pressure coming into the irrigation system on the house side of the backflow preventer. The pressure was reading 120 psi! Up to this point... I don't have much of a complaint. I think the work that was performed was slightly above market value in terms of cost, but I was OK with this. I don't agree with using a close nipple in this application! I had to return to the office, and asked the tech to contact me when he was finished. He calls and tells me about the overpressure issue, says "Don't turn the system on", and then tells me the total is 531.00 (I'm not sure how they got this number, as it looks like I actually got a discount on top of my "club" discount). I tell the tech that I'll settle up with the office on Monday... It's 6 PM on a Friday, and I want to have a look at the work before I pay the bill. I stop by the HW store on the way home to pick up a pressure gauge to check the water pressure. I get home... Test the water pressure, and sure enough... 120+ PSI throughout the house! I replace both of our pressure regulators on Saturday morning. Set the pressure at 60 PSI. Start up the irrigation system. All seems well. By the next afternoon, the tee with the close nipple, fractures along the entire length of the body, and we're back where we started. The following weekend, I sit down with a mechanical cad system, design, and build, a new manifold assembly, dig the boxes out, completely replace the assembly *and* all of the valves, for about 350.00. The system is back in service, and working much better than it did before I ripped it out and replaced it. Flow is improved, and I have individual flow control over each of the valves. For all of this back story... Here's where I have a problem what happened. (1) I was charged 531.00 for effectively diagnosing that I had an overpressure problem (my neighbor has since told me that the previous owner probably set the pressure this high because he was dissatisfied with how well the irrigation system was working. This is consistent with other lunacy we've seen in this house, so I'm certainly not blaming Sprinkler's Inc for the overpressure problem. The previous owner, by all accounts, was an idiot...) (2) The exact replacement of the close nipple is, however, what caused the failure after the repair. It's clear that the close nipple was torqued into the tee VERY hard... In the end, this, coupled with an aged tee (I'm being a little generous here... PVC, when not exposed to UV or high temperatures, tends to last for about a billion years...) was the primary cause of the secondary failure. This is squarely the fault of Sprinkler's Inc. (3) Nothing was fixed! My goal was to restore my irrigation system to an operational state! If the tech had taken a look at the valve/manifold assembly, and said "good lord... That's a bloody mess... For 1500.00, I'll just install an entirely new manifold assembly, and have you back in business within a few days!", there's a pretty good chance I'd have given him the thumbs up... No option like this was ever presented. The original estimate was 335.00... I suspect the overall goal was to keep the Rube Goldberg contraption in place, because this would, in the end, yield more repair work... In the end, when I account for parts *and* my time, I spent much more than 1500.00 to repair the system. The fact that I no longer need external, and very costly, maintenance calls, will hopefully justify the expense (it's been done right, this time). I've tried to write a fair review here. The techs were all very professional, and I certainly don't mean to imply that I was really ripped off, in any way. I do think Sprinkler's Inc is about 15-20% over market price on almost everything. I was willing to let this go, because the techs seem to be on the ball. I do feel like the objective here wasn't really to make a long term lasting repair to my irrigation system but was, rather to put a bandaid on a problem so that future service calls would be more likely. This is made even more obvious by their tiered pricing structure (vs. a straight parts/labor model). Not unethical, but not a business model that really works for me. Given that every tech that's been in the valve boxes has remarked that they recognize Sprinkler's Inc's use of "blue tubing", I'm led to assume that Sprinkler's Inc was partially involved in creating the cluster of band-aids to start with. There isn't any more blue tubing in my valve boxes. I'm sure there are folks that are fine with paying 500-1000/year for irrigation system maintenance, but I'm not... If you are someone that subscribes to this kind of service model, then Sprinkler's Inc is a good choice. I expect a repair to be, well, a repair... I expect to pay for itemized parts and labor, vs. a "level 5" repair. and... I expect repair to be an exception, rather than a regularly occuring event inspired by poorly executed prior repair work."

"Exceptional. John Croft did a complete bathroom remodel for us. John handled everything from tile, plumbing, and electrical. The work was done meticulously, immaculately clean, under budget and ahead of schedule. I suffer from asthma and John worked out a system to vent outside with a fan so that there was minimal dust. John's price was very fair. He communicated daily and ensured everything was to my satisfaction. He offered technical advice to improve the shower for an aging family member to ensure safety. I would definitely hire him again."