Serving Billings, MT and surrounding areas
Approved (Corporate)
In business since 2010
Free estimates
Warranties offered
"He's a very good concrete worker."
+16
Serving Billings, MT and surrounding areas
Approved
In business since 2006
Free estimates
Credit card accepted
"Fortunately, this company wasn't the normal seal of your driveway and run. This company removed any high spots, bumps, low spots, covered everything with a fresh surface of new asphalt and they ran roller machines over it for some hours. It looks great."
Serving Billings, MT and surrounding areas
Approved
In business since 2021
Free estimates
Emergency services offered
"The guys did an excellent job in my opinion. They had to do some excavating to get down to the pipe. The complete pipe was replaced, not patched in. The septic tanked was pumped out, inspected, and an access cover was installed above the ground for future cleaning. The guy did everything to the tee that he told me he was going to do before he started. He completed the job in one day like he said he would, and he put back all the landscaping back exactly how it was to begin with. I would have Western Septic come back in a heartbeat and do any repairs that I have in the future. Super nice guy, friendly, and was very reasonably priced for all the work he performed for me. 100% satisfied, that's for sure."
Serving Billings, MT and surrounding areas
In business since 2024
Free estimates
Small jobs welcome
"Solid Rock Construction did a wonderful job on our floor! They were easy to work with. My wife appreciated the extra effort to detail. They were excellent start to finish! We would highly recommend!"
+8
Serving Billings, MT and surrounding areas
In business since 2002
Free estimates
Emergency services offered
"We started using Maple falls a year and a half ago, and it's been excellent every time. We usually use them for general maintenance, but last year we had them do a huge landscaping project that involved the whole yard, and they did an outstanding job. They're always on time, and some of the hardest workers I've ever seen. Their pricing is quite reasonable for the work that they do. Nestor, the owner, has always been available if I ever have questions or concerns, and has great communication with you while they work for you."
Serving Billings, MT and surrounding areas
In business since 2011
Free estimates
Credit card accepted
"He is great to work with, gets in and gets it done."
Serving Billings, MT and surrounding areas
In business since 2018
Free estimates
Credit card accepted
"Brian is very pleasant a d a hard worker"
Serving Billings, MT and surrounding areas
In business since 2019
Free estimates
Credit card accepted
"MDK Coatings met my expectations for the most part entirely. He did a wonderful job, and completed work in an timely manor. All work looks wonderful The few issues that came up were dealt with promptly and professionally. I highly recommend this company."
+3
Serving Billings, MT and surrounding areas
In business since 2008
Free estimates
Warranties offered
"They were great to work with. Quick, efficient, shared all information up front and throughout my project. This was a rather odd basement project in a 100 year old house and I really appreciated their attention to detail. Great job."
Serving Billings, MT and surrounding areas
In business since 1989
"The work was done professionally. Care was taken to avoid damage to lawn and flower beds. Upon completion everything was restored to original condition."
Figuring out how many bars you need isn’t a one-size-fits-all equation. A structural engineer or experienced concrete contractor will look at your slab’s thickness, the loads it must carry, and local code requirements, then run the numbers for you. That quick consultation protects your budget and keeps the finished slab safe, level, and up to code.
Match the metal to the job. For light, thin pours like a sidewalk, welded wire mesh often does the trick. Thicker slabs—driveways, garage floors, foundations—usually call for traditional steel bars. If your site sees salt, humidity, or coastal spray, spend the extra cash on galvanized or stainless steel to fend off rust and avoid future repairs. When in doubt, a concrete pro can confirm the best fit for your project and budget.
Stainless steel costs more up front, but the alloy can last 75 years or longer with little to no rust. That longevity means fewer repairs, less maintenance, and peace of mind for structures exposed to salt, moisture, or de-icing chemicals. If you’re pouring near the coast or in a humid climate, the extra dollars now can save you multiple replacements down the road.
An engineer will review the slab’s thickness, span, soil conditions, and expected loads, then specify bar size, spacing, and grade. Skipping that step or guessing can leave you with cracked concrete or a blown budget. For a modest consultation fee, a local engineer or contractor can do the math and hand you a rebar schedule that meets code and keeps your project on solid footing.
From average costs to expert advice, get all the answers you need to get your job done.
Use this guide to budget for roof repair costs based on factors such as roof condition, materials, size, repair type and severity, and more.
Need fascia and soffit repairs? Hiring a pro ensures proper installation, protects against pests, and prevents structural damage. Learn about common warning signs, material options, and how fascia and soffits safeguard your home from moisture.
Learn how to budget for a new fence by exploring cost factors such as the fence size, height, posts, gates, style, and labor requirements.
Unsure who to hire to test for lead paint? Learn whether to call a lead testing specialist or contractor and what to expect.
Learn how to find and hire a handyman you can count on with this handy guide.
Learn how to find and hire painters, plus 10 questions you should always ask before choosing a pro.