Compare Quotes from up to 3 Pros

Top Insulation Contractors in LongvilleMN

Find your local pros

How It Works

  1. Answer a few questions about your home project.
  2. Within seconds, get matched with top-rated local pros.
  3. Compare quotes and choose the best pro for the job.

    Out of Network Insulation Contractors in Longville, MN

    Frequently Asked Questions

    What is insulation?

    +

    Insulation is material that provides a barrier within a home’s walls, ceilings, and floors to regulate temperature and noise. If your home gets overly hot in the summer and cold in the winter, it’s likely not insulated properly.

    Insulation efficiency is measured by R-value, which determines how resistant different types of insulation are to heat flow (or energy loss). R-values are measured by inch of thickness. The higher the R-value, the better the performance and the higher the price.

    How much does insulation cost?

    +

    Our project data lists insulation costs between $1,400 and $6,300, but your final price will depend on the type of insulation you choose, its R-value, and how much you need.

    • Fiberglass insulation: $0.30 – $1.50
    • Blown-in insulation: $1 – $2
    • Spray foam insulation: $0.50 – $2
    • Radiant insulation: $0.20 – $1
    • Rigid board insulation: $0.25 – $1

    Luckily, insulation is one of the best investments you can make in your home—it has an ROI of at least 100%, meaning you’ll likely make back what you spend in a few years or so.

    What is insulation made of?

    +

    Insulation is made of many different materials, which can also impact the R-value needed for energy efficiency.

    • Fiberglass: The most common insulation material made from glass. Fiberglass is a skin and lung irritant, so you’ll need to wear gloves and clothing when working with fiberglass insulation.
    • Cellulose: Made from recycled paper products, plus borate for fire and insect resistance.
    • Foam: Made from polystyrene, polyisocyanurate, or polyurethane plastic. You can also install cement-based foam insulation using rigid foam boards.
    • Mineral wool: Made of fire-resistant rock wool, a mix of natural materials, or slag wool, made from a molten metal product.
    • Natural fibers: Made from various recycled natural materials, including cotton, sheep’s wool, and straw.

    Where is insulation in a house?

    +

    If your attic is unfinished or you’ve ever demolished an interior wall, you might notice batt or spray foam insulation between the studs. Putting insulation between your walls and floors helps keep your home comfortable and your energy costs down. In addition to walls and attics, you can install insulation in your garage, in floors above vented crawl spaces, and basements.

    • Garage Insulation: $0.50 to $1.25 per square foot
    • Floor and crawl space insulation: $1 to $5 per square foot
    • Basement insulation: $1.50 to $2.50 per square foot
    • Wall insulation: $1 to $4 per square foot
    • Attic insulation: $1,500 to $6,000
    • Roof insulation: $1,500 to $4,500 or more

    What are the different types of insulation?

    +

    There are a few types of home insulation, and they all are made of different materials— most commonly, fiberglass, cellulose, and foam. Insulation includes these materials in the following forms:

    • Loose-fill: Also called “blown-in,” loose-fill is sprayed into wall cavities, attics, and other oddly-shaped areas using special equipment. This insulation is usually made of fiberglass, cellulose, or mineral wool.
    • Batts: An affordable insulation blanket best for unfinished spaces, such as between framing, studs, or joists. They come in pre-cut sections suitable for DIY installation and are mostly made from fiberglass, though other versions are also available.
    • Rolls: Similar to batt insulation, but comes in rolls. Its make-up leaves less chance for gaps between sections and is more efficient than other types.
    • Foam board: One of the most popular insulation types that can be used almost anywhere in your home. Foam boards also have a high R-value.
    • Spray foam: Expands and hardens to fill gaps, small and large. Can be closed-cell or open-cell, but closed-cell has a higher R-value, making it more expensive per square foot.
    • Radiant barriers: Does not reduce heat flow but directs heat away from the home instead. Radiant barriers are DIY-friendly and affordable, but they won’t be as effective in the winter months.

    Top Insulation Projects

    HomeAdvisor Community Rating

    Overall Rating:

    Longville Insulation Contractors are rated 0.0 out of 5 based on 0 reviews of 0 pros.

    The HomeAdvisor Community Rating is an overall rating based on verified reviews and feedback from our community of homeowners that have been connected with service professionals. See individual business pages for full, detailed reviews.


    Other Top Projects in Your Area

    Other Cities in Minnesota

    If you're looking for Insulation Contractors that serve a different city in Minnesota, here are some popular suggestions:

    Find additional Minnesota Insulation Contractors

    HomeAdvisor: The nation's largest network of screened and rated pros.

    Find Insulation Pros in Longville,MN

    Tell us about your project and we'll match you to the perfect pros.

    Get Matched With Pros

    Find Pros Nearby

    Do you provide these professional services?

    Find out how HomeAdvisor can help your business

    See Local Demand

    See Recent Leads

    Recent Job Requests for Insulation Contractors in Longville, MN

    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 08/19/21
      Nature of Project: Insulation for new construction/addition
      Location of Installation: Foundation walls
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Planning & Budgeting
      Area Description: Not sure
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 11/05/18
      Nature of Project: NA
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Property Owner: Yes
      Area Description: NA
      Are you interested in financing?: No
      Comment: I would like to get an estimate for spraying insulation foam on my floor joists. 240 sq ft.
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 09/07/18
      Nature of Project: Insulation for new construction/addition
      Location of Installation: Non-masonry walls
      Location of Installation: Roof
      Location: Home/Residence
      Desired Completion Date: Within 1 week
      Request Stage: Planning & Budgeting
      Property Owner: Yes
      Area Description: Wall framing is exposed / unfinished
      Are you interested in financing?: No
      Comment: It will be a 1806 sq. ft. 2 story home with vaulted ceilings in the upstairs. we are looking for pricing for budgeting purposes. We want to do the walls and roof. It will be a slab on grade with in floor heat.
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 06/10/18
      Nature of Project: Insulation for new construction/addition
      Location: Home/Residence
      What type of insulation do you want?: Spray foam
      Desired Completion Date: Within 1 week
      Request Stage: Ready to Hire
      Property Owner: Yes
      Area of Home: Ceiling
      Area of Home: Foundation walls
      Area of Home: Non-masonry walls
      Are you interested in financing?: No
      Comment: Need spray foam insulation on a planned new residential construction. Need estimates for vaulted ceilings and exterior walls.
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 05/15/18
      Nature of Project: Repair/Replace existing insulation
      Location of Installation: Foundation walls
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Planning & Budgeting
      Property Owner: Yes
      Area Description: Wall framing is exposed / unfinished
      Are you interested in financing?: No
      Comment: Cellar block wall was partially replaced. After finished, the wall didn't match up well with the floor plate and resulted in gaps. Need to fill the voids to prevent pests from getting into the house.
    • Project: Install or Upgrade Blown-In Insulation
      Location: Longville, MN
      Date: 07/31/15
      Desired Completion Date: More than 2 weeks
      Request Stage: Ready to Hire
      Comment: need to get estimate on having insulation removed.
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 04/10/15
      Location: Home/Residence
      What type of insulation do you want?: Spray foam
      Desired Completion Date: Within 1 week
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 01/28/15
      Nature of Project: Insulation for existing home
      Location of Installation: Attic
      Location: Home/Residence
      Desired Completion Date: More than 2 weeks
      Request Stage: Planning & Budgeting
      Property Owner: Yes
      Area Description: Wall framing is exposed / unfinished
      Comment: insulating garage
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 08/07/12
      Nature of Project: Insulation for new construction/addition
      Location of Installation: Ceiling
      Location of Installation: Non-masonry walls
      Location: Home/Residence
      Desired Completion Date: More than 2 weeks
      Request Stage: Planning & Budgeting
      Property Owner: Yes
      Area Description: Wall framing is exposed / unfinished
      Comment: 30 x 40 garage 9 ft 2x6 walls
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 04/06/11
      Nature of Project: Insulation for existing home
      Location of Installation: Non-masonry walls
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Planning & Budgeting
      Property Owner: Yes
      Area Description: No framing exposed - walls to remain intact
      Comment: I have a home on a lake in Longville, MN. The home was constructed in the early 1970's. I am going to re-side the home this summer and want to check into having it re-insulated at the same time.
    • Project: Install Spray Foam Insulation
      Location: Longville, MN
      Date: 02/09/11
      Nature of Project: Insulation for new construction/addition
      Location of Installation: Attic
      Location of Installation: Non-masonry walls
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Planning & Budgeting
      Property Owner: Yes
      Area Description: Wall framing is exposed / unfinished
      Comment: insailate pole type garage

    References Available
    Tell us your zip code to view pricing & schedule
    Tell us your location to view pricing & schedule
    Choose your project to view pricing & schedule

    Please enter valid zip.

    Please choose a location.

    We're sorry but the time you have chosen is no longer available.
    Please select a new time below:
    does not provide service to View pros who serve this zip
    Enter a zip code to view which pros serve this zip.
    There was an issue connecting to the server. Please try again or call Customer Service at 1-877-800-3177.
    We're sorry but the time you have chosen is no longer available.
    Please select a new time below:

    Select your appointment type and time:

    Final Step - Confirm Your Appointment:

    Confirm your appointment with on , - Change


    Required
    Required
    Required
    Required
     
     
     

    By clicking Confirm Appointment, you affirm you have read and agree to the HomeAdvisor Terms & Conditions, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.