How Much Do Interlocking Pavers Cost?

Typical Range:

$1,000 - $9,000

Find out how much your project will cost.

Cost data is based on research by HomeAdvisor.

Updated April 5, 2022

Written by HomeAdvisor.

Pavers can define a patio area or upgrade your driveway, but the high-end look will cost more than your average concrete or asphalt alternatives. Installing interlocking pavers can cost anywhere from $1,000 to $9,000, depending on the project size and type of pavers. Interlocking pavers cost about $6 to $15 per square foot, not including labor or other necessary materials for installation.

Estimating Interlocking Pavers Cost

Interlocking paver installation requires some prep work, and the cost can vary greatly depending on whether you’re installing a small patio or a huge driveway.


Professional installation for interlocking pavers is about $2 to $9 per square foot (plus the cost of the pavers), or about $75 to $100 per hour. Installing pavers can take several days. For a small area, around 100 square feet, it will take about 15 working hours.


To estimate the cost of your interlocking pavers, consider the size of the project. Pavers cost about $8 to $25 per square foot, meaning a 100-square-foot patio would cost $800 to $2,500 for the pavers alone. This size patio is ideal for a family of four.

Quality of Materials

Although interlocking pavers average around $8 to $25 per square foot, quality can also impact the final cost. High-end pavers go for around $50 per square foot.

How Much Do Interlocking Pavers Cost per Square Foot?

Interlocking pavers cost $8 to $25 per square foot, or about $10 to $34 per square foot, including professional installation. An average patio size of 100 to 300 square feet would cost about $800 to $7,500, not including installation and depending on the cost of the pavers you choose.

How Much Does It Cost to Install Interlocking Pavers Yourself?

Installing interlocking pavers yourself costs $8 to $25 per square foot for the pavers, plus $0.40 to $2 per square foot for bedding and sealing sand. You’ll also need a vibratory plate compactor to set the pavers, which costs about $500 to $1,500 to purchase or about $90 per day to rent.

Cost to Install Interlocking Pavers Yourself vs. Hiring a Contractor

You can save about $2 to $9 per square foot by installing pavers yourself. If you have a relatively flat landscape and you’re a handy homeowner, this might be a good option for you. But paver installation can take a few days—even for a seasoned pro—so consider the amount of time you’ll spend laying the sand base and installing the pavers yourself. Hire a paver installation professional for a patio or driveway that will serve you well for years to come.

Find a Paving Installer Near You
Find a Pro

How Much Do Interlocking Pavers Cost by Type?

Many interlocking pavers are made with concrete and resemble cobblestones, but you can also find interlocking pavers made of various materials to suit your desired aesthetic.

Concrete Interlocking Pavers

Interlocking pavers are often made of concrete, which costs around $8 to $15 per square foot. This is the least expensive type of interlocking paver, and concrete can be made in a wide variety of colors and shapes. Although concrete pavers are more prone to cracking than brick, they are also inexpensive and easy to repair. Concrete works well for driveways and patios alike.

Brick Interlocking Pavers 

Made with clay, brick interlocking pavers cost about $10 to $17 per square foot. This material is ideal for high-traffic areas and can withstand heavy weights from vehicles. Brick pavers are less prone to cracking compared to concrete.

Stone Interlocking Pavers

Stone interlocking pavers cost about $12 to $25 per square foot. This material is better for patios and walkways, as it won’t hold up well to heavy traffic. Stone interlocking pavers won’t fade in color like concrete or brick, but the natural material is more expensive than other paver types.

What Factors Influence the Cost of Interlocking Pavers?

Before installing interlocking pavers, there are a few additional costs to consider. Prep work, like removing old concrete or pavers or land grading, will increase the cost of this project.

Additional Materials

Sand is the best base option for interlocking pavers and will cost about $0.40 per square foot. You may also elect to seal the pavers with polymeric sand for an additional $1 to $2 per square foot

Concrete or Paver Removal

You may need to remove existing concrete or pavers before installing new interlocking pavers, and this prep work will cost about $50 per hour.

Land Grading

You may need to grade the area before laying pavers, and this will cost about $50 to $150 per hour or $200 to $1,200 per day. A hilly landscape is not ideal for interlocking pavers, which may shift or lay uneven without prep work.

Underground Utility Lines

Most interlocking pavement projects will not require permits, but if you need to excavate the land to level it or add gravel or sand beneath pavers for drainage, you’ll need to be aware of any utility lines. Moving utility pipes or underground wires will cost around $600 to $800 per line.

FAQs About Interlocking Pavers

How long does it take to install interlocking pavers?

Installing interlocking pavers can take 4 to 10 days, depending on the prep work required and the size of the project.

Is it cheaper to pour concrete or install pavers?

Compared to interlocking pavers, poured concrete is usually cheaper. Poured concrete slabs are about $6 to $12 per square foot, including the cost of installation. Pavers can range from $8 to $25 per square foot.

Can I place pavers on dirt?

You’ll need to lay a foundation of gravel or sand or create a leveled and compacted ground for pavers for best results. That’s because water will need to drain properly below the pavers to prevent erosion. Plus, an uneven base can cause the pavers to lay improperly, and they may shift over time.

Still Have Questions About Interlocking Pavers?
Ask a Pro