Get matched with top doors (interior) installers and replacers in Algonac, MI

"I love my new kitchen. Chuck goes above and beyond to make sure his customers are happy with the experience and the finished job. His crew is friendly, professional, and pay attention to detail. We also had 2 bathrooms remodeled, and new doors."

"I just had my garage door replaced by precision garage door they did an amazing job. The installers were efficient, friendly and set everything up for me. Connecting to my car my phone app. Everything was cleaned up old garage door out new one in. I recommend this company to anyone who wants a job done right"

"Cory was on time, professional, and more importantly incredibly thorough during my new home inspection. He did a great job of explaining what he found in each room. He also did a wonderful job explaining what things were small fixes and what items should be done immediately due to safety reasons or things that should be done to prevent further maintenance issues in the future. I received his report within 24 hours and it was incredibly easy to read. It also helped during negotiations with the seller since we could be so specific on what was found. I would absolutely hire Weatherstone Property Inspections and Cory again. Thanks again for your help Cory!"

"My new roof was installed in one day and looks great! Mike was very helpful. I would most definitely hire Extreme Exteriors again. Should you need a new roof be sure to contact Mike Harvey!"

"Needed basement floor tiles put into basement and the job was done beautifully. They were quick and professional and I couldn’t be happier with the results. Would definitely hire them again for any home improvements or repairs!"

"Audit was fine, didn't expect any more or less. Getting door and window leaks taken care of was the key."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"The crawlspace of our house we purchased about a year ago was damp and often had standing water in it.  Because the house is near a lake, the water table is very high and water is not uncommon.  Unfortunately, all the standing water drove the humidity of the house very high to the 60s and 70s year round!
I contacted Stay Dry to give me an estimate along with another provider.  Wayne from Stay Dry provide me with great information about the problem and how it could be solved.  The cost of doing this work is not cheap, but the risk of damage to the structure of our home is what convinced me to move forward.  In the winter, the window would have a great deal of condensation around them which isn't good for them either.  The cost was on par with the other provide I met with, but this solution seemed more complete.
The work took about four days to complete.  Stay Dry sent a great crew of five men, led by Spencer, who made residence in the three foot high crawl space for the next four days.  First they lined the carpet and walls with protective materials.  The entrance to the crawl space was in one of the bedroom, down a hall of white carpeting.  Once lined the work began by clearing out all of the fallen insulation and any other random debris from down below.  Next all of the wires were cleaned up and tidied up.  All the debris had to be carried out in five gallon buckets through the house as there isn't external access to the space.
Next, they dug by hand a 110 feet of trench, lined it with fabric and then stone (stone was carried in a five gallon bucket at a time) and finally the drainage pipe itself.  Once that was complete the entire space was lined with and sealed with a heavy duty liner (think swimming pool liner material).  The crawlspace was unbelievably clean when they were finished.  The liner is white so instead of dark sandy/mud floor, it was white liner.  No more rain boots to go down in the space.  The sumps were installed and set to drain to the exterior of the house.  
The pumps that were installed have a battery back up as well as a system that will text me if there is a problem with the pumps.  It also tells me the amount of water that is pumped out of the space each day.  I am floored by how much it pumps!
When the work was done in January, it was too cold to do the final part of the job which was to foam the rim joists.  The crew came back in April once it warmed up and completed the rest of the work.
Humidity in the house has dropped to the mid-30% range.  The crawl space is actually usable for storage and going down there for wiring or mechanical work is a breeze. Once all of the protective materials were removed from the carpet and walls, everything was spotless.  Everything was in the exact same shape as before the project.
The crew worked incredibly hard in what are not desirable conditions.  The solution did everything I wanted it to do and everything Wayne said it would do.  It is not inexpensive, but for the interior of our house and the overall health of our house, it was well worth it.
While I hope I don't have to ever do this project again, I would use Stay Dry again if I did.
"

"Provider arrived and went right to work. He removed the old door and installed new door.
"

Expert Window/Door installer and glass repair, with 20 years experience. Additional Services offered: Sliding, Cabinets, Vinyl flooring, etc. \nWe have the experience and dedication to get the job done right! \nWe guarantee your satisfaction, and we won't leave until the job is done right. We pride ourselves on the quality work we provide, while delivering great customer service! \nCall me at 810-531-0752, to discuss your project and setup time for a quote!