Get matched with top doors (interior) installers and replacers in Burgaw, NC

"JR construction was up front with the price, called or showed up when he said he would...exceptional service.. I would recommend JR construction A++"

"Needed fencing installed to keep groundhogs from taking up residence under our deck. Brady came up with a creative and complete solution that made sure the varmints were out and would not return. Would use again."

Secure Roofing is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade, combined with ability, is what makes us true professionals. Above all, we are watchful of our customers' interests, and make their concerns the basis of our business.

I’ve been working under a general contractor for a handful of years now. I do all the labor for him. I’ve remodeled many master bathrooms, many decks, converted a large garage into a master suite, and many other odd jobs. I’ve done all the tiling, carpentry, drywalling, painting, and installations on every job I’ve been apart of and am ready to get out and start my own projects.

Professional Handyman Repairs is a Maintenance, Remodeling and Handyman services company for all of your residential and commercial needs in Wilmington NC, Wrightsville Beach, Carolina Beach, Leland and surrounding areas.. Professional Handyman Repairs has years of experience delivering high-quality results in Wilmington NC and the surrounding areas..

"Chester made all the arrangements, though we did some shopping around ourselves beforehand. He told us which granite supplier/installer (of those we had already visited) he preferred , and why he felt that particular supplier/installer was his preference. He also pointed us toward his preferred tile shop ... having used Chester previously for another project, we trusted his judgment on this. He met us at both the tile shop and the storage yard of the counter top supplier to not only help us pick out what we wanted (granite design, and tile color/pattern), but also arranged for the consultant at the tile supply shop to meet with us at the same time. He also pointed us toward a plumbing supplier for our sink ... again, one of those suppliers whom we had already visited as part of our preliminary research during the earliest phase of our decision-making process to undertake this countertop re-do project. Once we selected all of our primary components (granite slab, tiles, sink + faucet), a start date was set, along with an expected finish-by date. Demolition took less than 1 day. Somewhere along the 2nd or 3rd expected day of work, a day (or part of a day) was lost (can't remember why) - but that did not impact the completion of the project. I had two concerns going into the project. One was whether the existing cabinet frame would support a new, much heavier counter top. The original counter top was a laminate ... probably not 1/10 the weight of a granite top. Chester said that he would have additional structural supports installed to help with that added weight. The other concern I had was about the sink we wanted to use ... the manufacturer's specs for the size of cabinet opening we would need for the sink to fit, indicated that we would not be able to use the sink we wanted, and would have to get a smaller one, which in this case would be significantly smaller if we wanted to stay with the same sink material (granite composite). Chester was quite certain that the sink (we wanted as our first choice) would fit, even if it meant a little shimming here or there. When it came time to install the sink, it dropped right into place without any adjustments needed, as Chester had felt it would ... another example of his judgment being correct. In the end, the final cost was a bit more than what we expected, but everything looked great, Chester was always available - just a phone call away, if needed; the job was done in a professional manner, and clean-up every day left the adjacent areas of the house completely livable."

"ECE installations very dependable, from start through completion. Replaced missing subfloor that was removed from another company, installed insulation, dry wall, doors trim and LVP. Very pleased with all work, I will be using ECE Installation for a future project."

"Jeff showed up on time and did his work professionally. He recommended replacing 4 vent covers due to splitting or rotting and gave me an estimate for that. He was gentlemanly and well-informed, didn't try to upsell things that weren't needed. I was aware of the deteriorating vent flanges because I had recently had my chimney cover replaced and the pro who did that notified me of their condition. I felt like Mighty Hands did what they were contracted to do in a way that made me confident of their work."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"Get It Done's crew was great! They came in and replace 9 windows and 2 doors in a day! Cj was very knowledgeable when he came to quote me and measure for the replacements. Their crew was very respectfully of my home and myself. I will absolutely use Get It Done in the future of all my exterior repairs and upgrades."