Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Keensburg, IL

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Keensburg

Avatar for Auto Transport - United Freight Of America

Auto Transport - United Freight Of America

1844 N Nob Hill Rd
4.84(
920
)

Auto Transport - United Freight Of America

1844 N Nob Hill Rd
4.84(
920
)
Customers say: Quality work
Recommended by 96% of Angi customers
Recommended by 96% of HomeAdvisor customers

United Freight of America is your all inclusive transport solution. CONTACT US FOR A QUOTE. please include pick up and Drop off locations and vehicle information

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

CLAUDIA H on October 2021

United Freight of America is your all inclusive transport solution. CONTACT US FOR A QUOTE. please include pick up and Drop off locations and vehicle information

"Excellent, no problems. My car was new the first year I used the service and there has never been any damage during the transports. The men picking up and delivering the car have always been pleasant and cooperative. Both Ely and Guy at United Transport has been highly responsive to my needs. I would highly recommend this company."

CLAUDIA H on October 2021


Firemaster Inc.

5300 E Morgan Ave.
3.20(
5
)

Firemaster Inc.

5300 E Morgan Ave.
3.20(
5
)
Customers say: Quality work
45 years of experience

Over 30 years in business. Over 100 years combined sales and service experience. Financing available for all products.

Over 30 years in business. Over 100 years combined sales and service experience. Financing available for all products.


Two Brothers Construction

No reviews yet

Two Brothers Construction

No reviews yet

Grille Technologies LLC

5910 Pine Hill Road
No reviews yet

Grille Technologies LLC

5910 Pine Hill Road
No reviews yet
Free onsite estimate

Lang Brothers Construction

3021 Broadway Ave
3.56(
9
)

Lang Brothers Construction

3021 Broadway Ave
3.56(
9
)
Customers say: Super punctual
37 years of experience

Siding Windows Roofing, Metal and Shingle, Re-Roofs, Tear-Offs, New Construction

"They did a great job. They were very professional and cleaned up after they were done. I would hire them again."

Kim S on June 2019

Siding Windows Roofing, Metal and Shingle, Re-Roofs, Tear-Offs, New Construction

"They did a great job. They were very professional and cleaned up after they were done. I would hire them again."

Kim S on June 2019


J and h construction

6612 Old Corydon Rd
No reviews yet

J and h construction

6612 Old Corydon Rd
No reviews yet
Free onsite estimate

handyman we do all jobs and never say no

handyman we do all jobs and never say no


Avatar for MKG Construction LLC

MKG Construction LLC

P.O. Box 852
No reviews yet

MKG Construction LLC

P.O. Box 852
No reviews yet
12 years of experience

We are a Southern Indiana based Design, Build + Remodeling company specializing in kitchen, bathroom, and full home remodels and design.

We are a Southern Indiana based Design, Build + Remodeling company specializing in kitchen, bathroom, and full home remodels and design.


Affordable Contracting

Unknown
No reviews yet

Affordable Contracting

Unknown
No reviews yet
28 years of experience

all jobs are kept in house no job is subed out ...... all jobs that have a signed contract need a half down payment rest paid at end of job..

all jobs are kept in house no job is subed out ...... all jobs that have a signed contract need a half down payment rest paid at end of job..


ALLSIZE Dumpster Rental

-
No reviews yet

ALLSIZE Dumpster Rental

-
No reviews yet
35 years of experience

ALLSIZE Dumpster Rental provides professional dumpster rental services and junk collection in the area of Detroit MI. For more information don't hesitate to call us. Garbage Removal, Trash Removal, Garbage Truck Service, Scrap Metal Removal, Waste Removal, Demolition Contractor, Fraser MI Garbage Collection, Garbage Dumpster, Affordable Dumpster Rental, Waste Management Dumpster Rental, Small Garbage Dumpster Rental http://allsizedumpsterrental.com/

ALLSIZE Dumpster Rental provides professional dumpster rental services and junk collection in the area of Detroit MI. For more information don't hesitate to call us. Garbage Removal, Trash Removal, Garbage Truck Service, Scrap Metal Removal, Waste Removal, Demolition Contractor, Fraser MI Garbage Collection, Garbage Dumpster, Affordable Dumpster Rental, Waste Management Dumpster Rental, Small Garbage Dumpster Rental http://allsizedumpsterrental.com/


Avatar for E L Walters Air Conditioning & Heating Inc

E L Walters Air Conditioning & Heating Inc

12420 N Green River Rd
4.15(
13
)

E L Walters Air Conditioning & Heating Inc

12420 N Green River Rd
4.15(
13
)
Customers say: Super punctual
42 years of experience

E.L. Walters has been in business for over 34 years in the Evansville area and services all makes and models of heating and air conditioning equipment. All technicians are licensed and maintain current knowledge through continuing education. Additional phone - (800) 207-5931. Additional email - dennisf@elwalters.com.

"My air conditioner initially started having problems in May 2018. I have a Homebuyer’s Warranty through 2-10, so I contacted them to have it fixed. The only A/C company they are contracted with in this area is EL Walters, so they had them come out. They repaired it. The AC started having problems again in July of 2020. I contacted 2-10 in late August and they approved replacing the system. Again, they used EL Walters. The new unit was installed and things seemed to be fine until July 2021. The house wasn’t cooling as well. By the end of August, it wasn’t cooling at all - less than 1 year after having a new unit installed. I contacted a different company to come out and diagnose the problem because it was 95 degrees with a heat index of 110 and there was a heat advisory. I wanted answers ASAP and I knew EL Walters was going to tell me I had to go through 2-10. The technician that did the diagnosis informed me that the furnace evaporator coil was not compatible with the AC unit that EL Walters installed and that they should have also replaced the coil. He was shocked that they did this. His comment was, “They had to know this was wrong and that this system would fail. They probably thought it would last longer than it did and then maybe it wouldn’t be their problem. You need to report this to EPA and they should be responsible for repairing it because they installed it knowing it wouldn’t last.” I contacted EL Walters to let them know the diagnosis. I explained what the technician had said and the receptionist’s response was, “Why would you have someone else come out to check our install?” I thought that response was inappropriate. I told her because it’s blistering outside, my AC isn’t working I wanted answers ASAP. She said that since I used my home warranty company, I would have to go back through them. I contacted 2-10 and they said they’d reach out to EL Walters. Two days passed and I never heard anything. I called 2-10 back and they said it would just be easier to put in a new service request. I didn’t want to do that because EL Walters is the only company the use for this type of repair in Evansville and they had botched the install of the unit. My husband ended up contacting a third heating and air company because he wanted to be sure about the diagnosis. The technician inspected the furnace and AC unit and said, “You can’t put a 410 on a 22. It will make the whole system blow up, which is what has happened here. The way your system is set up, they would’ve had to pull out your furnace to replace the coil. They probably got lazy and didn’t feel like doing that, so they just did this and hoped it lasted awhile.” I wasn’t sure what this is meant, so I looked it up. The new unit that they installed uses R410A refrigerant. The existing coil in the furnace uses R22 refrigerant. They charge at different pressures, so they are incompatible within the same system. Putting R410A into an R22 system makes the pressure too high, so the valves rupture and refrigerant leaks out. All new AC units made since 2010 cannot use R22 because of EPA regulations. Knowing that the system was much older than that, EL Walters should have known the coil would was not compatible. I’m not sure whether or not EL Walters’ technicians installed this incorrectly out of careless negligence or lack of knowledge. Either way, we did not feel comfortable having them come out to “repair” anything else, so we bypassed the home warranty company and paid out of pocket for the other heating and air company to install a new coil and recharge the system. Sometimes you get what you pay for. I know this is a long review, but I wanted to give as much detail as possible. I think it is despicable that a company would install something incorrectly knowing that it would fail, be offended that you had someone else check their poor work, and then not even own up to the mistake when there is clear evidence of it. I ended up having to pay $2200 to correct their improper installation."

Dionna J on September 2021

E.L. Walters has been in business for over 34 years in the Evansville area and services all makes and models of heating and air conditioning equipment. All technicians are licensed and maintain current knowledge through continuing education. Additional phone - (800) 207-5931. Additional email - dennisf@elwalters.com.

"My air conditioner initially started having problems in May 2018. I have a Homebuyer’s Warranty through 2-10, so I contacted them to have it fixed. The only A/C company they are contracted with in this area is EL Walters, so they had them come out. They repaired it. The AC started having problems again in July of 2020. I contacted 2-10 in late August and they approved replacing the system. Again, they used EL Walters. The new unit was installed and things seemed to be fine until July 2021. The house wasn’t cooling as well. By the end of August, it wasn’t cooling at all - less than 1 year after having a new unit installed. I contacted a different company to come out and diagnose the problem because it was 95 degrees with a heat index of 110 and there was a heat advisory. I wanted answers ASAP and I knew EL Walters was going to tell me I had to go through 2-10. The technician that did the diagnosis informed me that the furnace evaporator coil was not compatible with the AC unit that EL Walters installed and that they should have also replaced the coil. He was shocked that they did this. His comment was, “They had to know this was wrong and that this system would fail. They probably thought it would last longer than it did and then maybe it wouldn’t be their problem. You need to report this to EPA and they should be responsible for repairing it because they installed it knowing it wouldn’t last.” I contacted EL Walters to let them know the diagnosis. I explained what the technician had said and the receptionist’s response was, “Why would you have someone else come out to check our install?” I thought that response was inappropriate. I told her because it’s blistering outside, my AC isn’t working I wanted answers ASAP. She said that since I used my home warranty company, I would have to go back through them. I contacted 2-10 and they said they’d reach out to EL Walters. Two days passed and I never heard anything. I called 2-10 back and they said it would just be easier to put in a new service request. I didn’t want to do that because EL Walters is the only company the use for this type of repair in Evansville and they had botched the install of the unit. My husband ended up contacting a third heating and air company because he wanted to be sure about the diagnosis. The technician inspected the furnace and AC unit and said, “You can’t put a 410 on a 22. It will make the whole system blow up, which is what has happened here. The way your system is set up, they would’ve had to pull out your furnace to replace the coil. They probably got lazy and didn’t feel like doing that, so they just did this and hoped it lasted awhile.” I wasn’t sure what this is meant, so I looked it up. The new unit that they installed uses R410A refrigerant. The existing coil in the furnace uses R22 refrigerant. They charge at different pressures, so they are incompatible within the same system. Putting R410A into an R22 system makes the pressure too high, so the valves rupture and refrigerant leaks out. All new AC units made since 2010 cannot use R22 because of EPA regulations. Knowing that the system was much older than that, EL Walters should have known the coil would was not compatible. I’m not sure whether or not EL Walters’ technicians installed this incorrectly out of careless negligence or lack of knowledge. Either way, we did not feel comfortable having them come out to “repair” anything else, so we bypassed the home warranty company and paid out of pocket for the other heating and air company to install a new coil and recharge the system. Sometimes you get what you pay for. I know this is a long review, but I wanted to give as much detail as possible. I think it is despicable that a company would install something incorrectly knowing that it would fail, be offended that you had someone else check their poor work, and then not even own up to the mistake when there is clear evidence of it. I ended up having to pay $2200 to correct their improper installation."

Dionna J on September 2021

...
Showing 1-10 of 110
FAQs for interior trim and decorative moldings installation projects in Keensburg, IL

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Keensburg, IL homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.