Top-rated interior trim and decorative moldings installers.

Get matched with top interior trim and decorative moldings installers in Austin, TX

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Interior trim and decorative moldings installers in Austin

Economy House Painting and Remodeling LLC
4.9(
49
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

In business since 1994

Free estimates

Warranties offered

"Ernest and Allan did Excellent work repairing part of a wall and ceiling in my garage that had water damage. Ernest even helped me re-hang some heavy shelves that had to be taken off the wall. This is a top notch company. Highly Recommended!"
Portfolio
Portfolio
Portfolio
Portfolio
Portfolio

+1

Response time6 hrs
21 neighbors recently requested a quote
Recommended by79%of homeowners
Avatar for Carpenters on Call
Carpenters on Call
4.3(
50
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

In business since 2006

Free estimates

Warranties offered

"We are satisfied with the work which took about 5-6 hours. We had some damage to interior door trim in the bathroom caused by busting the door door in. Gary was prompt, thorough and professional. We were kept in the loop on status and he went above and beyond to make sure our project was completed to our satisfaction. The level of detail he brought to this project is very much appreciated."
Closet Build - Before
Closet Build - After
Bathroom Upgrade
Bathroom Upgrade
Baseboard - Bull nose Trim

+35

Response time1 day
Recommended by95%of homeowners
Avatar for Apex Andrade Construction
Apex Andrade Construction
5.0(
21
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Offers commercial services

"This company painted a couple rooms in my master suite and installed new moldings on the doors and window. They arrived on time each day and efficiently completed the job. The painting was done well. The only issues were that many of the screws and nails were left in the walls. I don't think there was any communication from me to remove the old screws and nails, so I did not take off a star. There were two holes that were filled, but it looked like they were filled with caulk instead of spackle. Not really noticeable so I didn't complain. The other issue was that one of the moldings they did was with a warped board and it's not flat to the wall. Not extremely noticeable unless you're looking at it from the side. I would hire again, but next time I would try to be more communicative with them. I do appreciate their reliability and professionalism."
Response time11 hrs
Response rate90%
Recommended by88%of homeowners
Avatar for Mr. Handyman of South Austin/Lakeway
Mr. Handyman of South Austin/Lakeway
4.5(
109
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

In business since 2006

Emergency services offered

Warranties offered

"Luis showed up on time and did a very professional job changing air filters, alarm batteries, installing light covers, etc. He had a "Mr Handyman" uniform on and drove a truck decorate with "Mr Handyman" . This indicated that the company was professional and not just a part time handyman service. Then time included traveling to the store to pick up the correct size/type of light bulbs. Mr Handyman may be a bit more expensive (approx $300, ((which included supplies)) for two hours of work), but it was well worth the competence."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+223

Response time11 hrs
Response rate100%
5 neighbors recently requested a quote
Avatar for Arkatex LLC
Arkatex LLC
5.0(
12
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

In business since 2021

Free estimates

Customers say: Quick response

"Travis exceeded our expectations with the resurfacing and painting of cabinets in our kitchen and one bathroom, along with a custom vanity in our master bathroom. He was responsive, resourceful and efficient. Everything we could have hoped for in a contractor. He is very skilled as a woodworker and takes pride in his work. I would highly recommend!"
Built in cabietry
Dining table
Dining table
Trazzo tile
Trazzo tile

+1

Response time40 mins
Response rate100%
Recommended by100%of homeowners
GG Remodeling
4.8(
19
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

Super Service Award Winner

In business since 2019

Free estimates

Small jobs welcome

"They did my kitchen & bathroom remodel. They were helpful, very thorough. Detailed oriented. Had proper knowledge and good workers. They were respectful and finished project on time. Any add-ons were handled diligently as well."
Room
Room 1
Living room
Living room
Living room

+123

Response time10 hrs
Response rate91%
17 neighbors recently requested a quote
Eimer Design Build, LLC
4.8(
10
)
Interior Trim and Decorative Moldings - Install

Serving Austin, TX and surrounding areas

Approved

In business since 2010

Customers say: Quick response

"Our project was a total remodel and update to our kitchen from top to bottom. Mr. Eimer can do everything !!! Cabinets, plumbing, wall repair, counter top removal and installation, electrical lighting. He is truly one of the most honest contractors I have found. He actually cares about his work and does it as if he were remodeling his own or his mother's home . He pays attention to every detail. You do not have to worry about anything like you do with so many contractors today who hire unskilled labor that make mistakes and unprofessional work. I am a very satisfied customer !!!!"
Response time1 day
Recommended by87%of homeowners
...
Showing 1-10 of 439
FAQs for interior trim and decorative moldings installation projects in Austin, TX

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.

The Austin, TX homeowners’ guide to interior trim and decorative moldings installations

From average costs to expert advice, get all the answers you need to get your job done.