Get matched with top sheet metal and ornamental metal fabricate pros in Laurel, MD

"Charles Ornamental are best of what they do."

"I was pleased that Singleton came all the way from southern Maryland to cut off projections on two kitchen drawer handles, saving me a trip there to bring the two drawer handles down to him. While the work itself was small, and took only about 1/2 hour, considering that he drove all the way to our apartment in downtown DC, his overall price was incredibly inexpensive. He came on time and although we did a little refining with some metal sand paper after he left, he was very efficient and had done a very good job, saving us a lot of money by not having to buy 24 new matching drawer handles."

"Great experience with Mr Palmer! Custom-made a set of washing machine drain tubs , extra large size! Extremely quick to reply to my initial inquiry and follow-ups, and lightning speed to complete my small project! Thank you so much! Could not be more happy! Was even accommodating on the. Highly recommend!"

"I'll start this review by saying that to me, the "end result" is what counts most.  And Neale and his company produced exactly the custom look security fence I had envisioned.  This was a bit of an unusual request, because even though many people have iron bars welded over their A/C units for security, I needed two large, expensive (side by side) heat pumps protected.  Also, I felt a "security fence" would look better than just metal bars.  So here was my experience: After 1st calling and getting leaving a message with an assistant, it did take a few days but Neale called me back to set up an appointment to give an estimate.  He arrived right on time, took a look at the situation, and after a few minutes of brainstorming we were on exactly the same page in terms of design - and I liked how he sketched it out.  I also felt his quote was very reasonable (his was the 3rd estimate I had gotten).  And I don't know, there was just something about Neale, I could tell he had a *passion* for security fencing and "keeping crooks out" so to speak.  After getting my estimate in writing via email later that day, I put down my (1/3) deposit.  About a week later, after fabricating much of the fence in his shop, Neale and his team arrived and got to work fast.  I took them 2 days total, which was fine (day #1 they installed the fence posts and the concrete needed to set overnight).  Day# was most of the assembly,  welding and the paint job. Now, about 2 weeks later, I am extremely happy with the final result.  Very secure, and very sharp looking!  Even the gloss black paint job is very nice.  My neighbors have made several admiring comments over the past week also.  The only thing I could fault, if anything, would be if speed - is critical too you.Baltimore Wrought does seem like a busy company so don't be surprised if there is a week or so delay / backlog.  Also, they do prefer cash payment vs credit card.  (I did my deposit on credit card and paid the final 2/3 cash).  But  these minimal factors were not a big deal for me, because *high quality* work and to a lesser extent, total price, were all I really cared about - and these guys definitely delivered on both! 
"

"MC Fence & Deck built my dream deck, and I’m obsessed! Hunter walked me through the design, and his ideas made it way better than my original plan. John and his crew handled everything. Build and add an aluminum fence around the yard. They were professional and on time, and the craftsmanship is top-notch. Now my whole backyard looks like a magazine spread. I highly recommend these guys for decks and fencing. They’re the best in the business!"

"I met with Richard to discuss the project scope. He was professional and I received the estimate in a timely manner. Also, the estimate was reasonable. Though the community board chose a different vendor for this specific project, we would have no problems in reaching out to Walter Brown Services for future work."

"This is a follow up on a review made previously.  H&N was quite upset with our B rating.  In their response to our review they indicated that they would contact us and make things right.  (that was my interpretation of their response).  In my initial review I said that the installation of the windows was unsatisfactory because the trim partially (1/3) covered two electrical outlets and ruined the esthetics of the job.  I did not mention that the extensive trim was not finished and we were left with a bare wood surface.  H&N did indeed call us and my wife mentioned the lack of a protective polyurethane  coat.  A man did come out and coated the window trim, unfortunately that coat dried leaving a very rough coat with excess polyurethane in the  4 decorative grooves of the trim.  While we alerted H&N of this,the problem was not really acknowledged or remedied.  I did a lot of research on how polyurethane needs to be correctly applied and it is a long and tedious process of applying 4 coats of polyurethane wiping excess finish off and then sanding the finish for each coat.  I am not a stupid person (as they indicated in a phone call to my wife) I would have paid an additional sum to have the windows finished correctly, but H&N never requested additional payment.  Also the overlapping of the trim with the electrical  outlets was again ignored.  Again, I would have paid extra to move the electrical outlets, but they never requested additional payment.  I have bought materials and will finish the windows myself, but I will have to hire someone to move the electrical outlets. 
 
I received a second survey in my e-mail that was not from Angies' list, and I filled it out stating exactly what I said in my Angies review.  I don't know who sent me this survey.  In response to this review, my wife received a phone call from H&N in which the caller said that only a crazy or stupid person would have filled out the such a survey.  My wife was unaware I had received and responded to a second survey so she was very confused.  Unfortunately, I was hospitalized at the time and could not respond as I was very sick. 
I am not writing this review to get H&N to do additional work, in fact they are not welcome in our home and we will pay someone else to complete the job.
"

"The best fencing job yet"

"I had Mike fabricate a custom set of headers with a 3 inch exhaust for a Ford Hemi I put into a 69 Mustang. He also boxed the front cross member for easier access to the oil pan. I was so impressed with his attention to detail that I had him modify the fuel cell to accept AN 10 fittings to feed my 528 cubic inch hemi. I refer friends and family to Mike for fabrication projects on their street rods or race cars Thomas"TJ"Johnson..."

"They were professional and flexible they did a wonderful job. They were very efficient and they finished their work and quickly and I highly recommend them."