Get matched with top closet builders in Lebanon, ME

"These guys get it done super hard work everything was done right I’m happy with the outcome and my wife is happy as well Tejada remodeling is awesome and well done all my projects from now on"

"We had shelves installed in our coat closet to turn it into a pantry, and Brian Clark did a great job. He made sure he understood exactly what we wanted before starting, worked professionally, and was prompt and efficient. We’re very happy with the results and would definitely recommend him."

"We hired Garrett  to build an attached mudroom and garage to our home.  After interviewing many contractors, we decided to go with Garrett. Don't let his age  scare you. We found him to be hard working, honest, caring fair and professional.  We were very impressed with his quote. Everything was spelled out. None of our other quotes were broken down like Garrett's.  During the work if there was any issue, Garrett dealt with it immediately.      We would highly  recommend Garrett R Gerard Construction and if we build anything again we would definitely  use Garrett again."

"Fred has the nicest men working for him they are gentleman.I have been going through a lot lately and when Fred called to see how things were going ,(all good)he realized I would have a hard time using my back door so he called his men and they made me steps to use on the side entrance they were so good I thought they were the final ones Iam so happy with the work being done."

Backed by 30 years of residential and commercial building expertise. From excavation to roof installation, we manage every step with precision. Full design‑build services to bring your vision to life

I'm a carpenter, handyman, and Builder with 30 years experience working in and around the Portland area. I can handle anything from small handyman projects to additions and garages, I have a lot of experience doing full remodels, additions, roofing and siding, decks, built-in Cabinetry, and sheds.

I have worked in the trades for almost 40 years and am currently renovating my 3rd 100 year old home in the greater Portland area.\nAfter that many homes and countless other projects over the years, i have become proficient and confident in almost every aspect of home building, renovating, and remodeling.\nBig or small, my attention to detail and ability to communicate clearly with my clients has allowed me to keep a steady workload based almost entirely on repeat calls.\nThat said, i am always excited to meet new challenges, learn new skills, and add more happy customers to my base.

DS&P Handyman Services provides amazing handyman services within the Saco area! We provide great service and creative solutions to many of your handyman needs and look forward to working with you. Give us a call today!

"Kevin built us a custom storage shed, and we couldn’t be happier with how it turned out. It looks amazing—so much so that neighbors have actually stopped to compliment it! I’m pretty picky about details, and this definitely met my expectations. Kevin is honest, easy to work with, and clearly knows his stuff. There were a couple of small bump: his invoices were a bit hard to follow and getting him back to wrap up the final touches took a little extra effort, but in the end the shed is fantastic and I am very satisfied. I’d definitely recommend Kevin to anyone looking for quality custom work."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"