Get matched with top closet builders in Phoenix, AZ

"The transformation of our closet is totally unrecognizable. Chad took my vision and made it into a reality. We are so pleased with the outcome. Chad was easy to work with, not pushy at all, and very reasonable. He also has options that the other closet places do not offer. Make sure you check out Organized by Design on your next closet project!"

"Serge has worked on two residential home remodel projects for us. We highly recommend him. He is reliable, very knowledgeable and pleasant to work with. He has all the equipment needed to get the work done efficiently. With so many unreliable and unskilled individuals working in this trade area, you can count on Serge and his experience to complete the work agreed upon."

"

- Triton showed up on time for both the initial quote and the installation date.

- John explained all of my options and showed me samples.

- Installation was done in 1 day and the cabinets look great!

"

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"It went great was very satisfied with the job that was done and the price."

"We highly recommend Derek for your next remodel project. Our project included a major Kitchen redesign, as well as tile and cabinetry in two Bathrooms. From our very first meeting with Derek, he brought creative design ideas to help us reimagine our spaces to achieve the bright and open concept we were looking for. This was a large project requiring multiple trades which Derek sourced and managed. It all went very smoothly and through each step, Derek worked closely with us to ensure every small detail met our expectations. His suggestions for tweaks here and there resulted in not only beautiful ascetics but, the best possible function as well. Thank you for everything Derek; you are a fabulous craftsman and a great guy! Tom and Lisa"

"Mark did a excellent job on my backsplash..He was professional..courteous..and explained everything he was doing in detail so that there were no surprises. I highly recommend Mark and his company for any remodeling work needed."

5 EMPLOYEES. NO SUBS. COST IS DETERMINED BY THE JOB. NO TRAVEL CHARGES. NO SERVICE CHARGES. NO EXTRA CHARGE FOR AFTER HOURS SERVICE. LICENSE NUMBER 210281. MAY CONTACT THROUGH EMAIL.

"My wife and I recently met Ray with CKBR at a Maricopa County Home Show. He was one of many folks we visited with when we were looking to remodel our guest bathroom. After the Home Show, Ray was very prompt with following up with us. We ended up having several contractors in our house to provide estimates, which included very high pressure sales tactics. Ray was the final one we were going to visit with. His approach was dramatically different than the others, and one of the primary reasons we ultimately ended up going with CKBR. He did not pressure us at all. The products he offered were very similar to the other companies and the price was on the lower end of the estimates we received. He gave us multiple options to choose from based on various levels of work we could have done. He even worked with us on installation only pricing if we wanted to provide some of the materials. After deciding to go with CKBR, scheduling the job was handled very quickly. Ray and the Project Manager, Shane, came over to take final measurements and ordered the material. Once the material arrived, the installation only took three partial days – by two very qualified installers. Ray followed up right away to ensure we were satisfied. There were two very minor details I asked about. He and Shane were in contact with one another, and Shane came over himself a few days later to take care of them. Overall, I am very satisfied we decided to do business with CKBR. My wife and I have talked about having work done in one of our other bathrooms. When we’re ready to do that work, I think we’ll skip the hassle of having multiple people in our home with their high-pressure sales tactics and just call Ray with CKBR!"

"Tony was not the least bit put off by the fact that my jobs were relatively small and few. I was so pleased with how he tackled the odd jobs I had, that I asked him to do some preventative maintenance. I should have asked his rate before he came so I would have been more prepared when it came time to pay. When he gave me his price, he asked if it was an ok amount. I probably could have negotiated with him, but was not willing to as his customer service/attitude were worth it to me. He worked non-stop for a little over 2 hours and completed numerous small tasks which we have put off for months. I will definitely call Tony in the future and will refer him to friends."