Get matched with top doors (interior) installers and replacers in Lecanto, FL

"The kitchen remodel went very well with K&S. They not only provided excellent service, but we’re very clean, friendly, and accommodating. They provided excellent customer service and made me feel at ease through a process that is normally so stressful. Would recommend them for all home improvement needs!"

"Kitchen remodel required extensive rework of walls and ceiling before installation of cabinets by another company. Sheffieldâ s employees were knowledgeable, skilled and courteous workers. Asked questions instead of forging ahead on the wrong track. Finished product is above expectations. Although not the cheapest bid, very satisfied with overall product."

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

\n\n\nWith over 20 years of experience in the construction industry, we specialize in doors, hardware, and interior renovations. Committed to excellence, we pride ourselves on being courteous, reliable, and dedicated to delivering exceptional value to every project. Our focus is on quality workmanship and premium materials, ensuring your project is completed to the highest standards without cutting corners.

"Sandy replaced my 2 bathroom vanity counter tops including sink, faucets, backsplash. I was really pleased with his quality of work performed, attention to detail and his professionalism. Even though this was a somewhat "small" rehab project, I will use him for any and all future projects I have. I have found it very frustrating trying to find a dependable and trustworthy company because many of them you talk to on the they either don't return phone calls, or don't respond to first message about getting a rate quote at all. Thank you Sandy for your great service!! I will happily refer and recommend you to any friends or family that need your services."

We are a reliable and experienced electrical service provider focused on quality, safety, and customer satisfaction. We specialize in panel upgrades, outlet and switch installations, lighting, troubleshooting, and general electrical repairs.\n\nWe take pride in clean, efficient work and fair pricing. Whether it’s a small repair or a full upgrade, we make sure the job is done right the first time. Fast response and flexible scheduling available.\n

Hello my name is Jonathan Colucci and I am a sheet metal construction worker out of Ocala Florida looking to pick up any kind of side work. I am a jack of all trades and can do a little bit of everything. If there is anything you need Repaired, installed or Built send me a message and ill see if I can help.

"I requested an estimate to replace an opener for one door and add a sliding lock to the second. Ben B, the technician, diagnosed the problem and prescribed a much cheaper option to repair my opener. He was courteous, professional and worked quickly. He explained maintenance steps we should take in the future. Ben also installed a sliding lock to reinforce our second door. The office called me first to let me know the timeframe in which he would arrive and Ben called me when he was 30 minutes out. I recommend Discount Garage Doors and I hope to get Ben again if I need their service."

"I had a Great experience with custom made window treatments for my living room. The staff at Statewide Blinds were Amazing. Connie was extremely pleasant and knowledgeable and was a joy to do business with. Larry was prompt ,efficient and totally experienced in his field. I would definitely recommend this Company for any window or blind installation."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"