Get matched with top drain clog or blockage clearers in Northborough, MA

"Very friendly service, professional, I love this plumbing, agency."

"<p>Our main sewer line is PVC up to the curb where it turns to clay. Because water was backed up, he couldn't use the jet to clean so he started with a cable, but the cable could not get to the clay part because of an offset of the lines. he got a camera to ***** and showed me and explained everything he saw. Once water moved, he brought in the jet and with the assistance of the camera, removed all the roots in the line. The root clogs were really bad and he took his time to make sure all were gone. Showed me the line once it was clean as well, no roots left. He advised me of my options, how I can treat the line for roots with a foaming root killer and optionally invest in a new line to rid of the problem altogether.  James was a pleasure to have, very polite, down to earth. Talked to my kids about chess and TV shows while working, very patient. left the place very clean when work was completed. He got himself a new happy customer and will be using his services whenever I need drain/sewer work.</p>"

"Great plumber. On time, responds right away. Clean and quality job."

"Your company is outstanding and we are extremely happy. Our technician Garett was prompt and polite. He was very knowledgeable and explained things about our situation that we were totally unaware of. Potentially saving us time and money down the road. Garrett was attentive to our to our needs and was very careful of our pets as he was working. We would definitely use Beacon Drain Service again."

"These guys only do clogged drains and they do it well. They came the next day and fixed my drain. Highly recommended. A+"

"Great price and knew the best sump pumps on the market"

We pride ourselves on reliability, communication, integrity, and quality work. We are experts in our trade. We look forward to earning your business! Please call 978-941 5561\nFor all drain and sewer services

"My pipe broke on a Sunday I found Jeff Bernard on Monday they came right out and fixed the leaks super fast very friendly and professional and reasonably priced I can’t express enough how great full I am to have my leak fixed so fast"

"I began installing a replacement dishwasher in our 59-year-old house and ran into a hot water line connection incompatibility problem. Jim quickly and efficiently resolved that problem and also pointed out and corrected a couple of other problems that would probably have jeopardized the installation. I have engaged a number of plumbers over the years but can think of none who were more pleasant to deal with than Jim Trudo. I will most certainly call him for any future problems and can unequivocally recommend him to anyone looking for a quality job at a reasonable price."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."