Get matched with top doors (interior) installers and replacers in Paso Robles, CA

"Karl was very repsonsive and intuitive in addressng our particular repairs. Profesional from the first through the last communications."

"The projject involved carpentry, painting,installing gutters and more. The work was done in a professional manner, on time and with attention to detail. Everyone was courteous and effecient. I would recomend this company without reservation. They also repair furniture, and did an extra job for me that was not in the original contract."

"Very old sliding glass door needed new rollers. Responded to my request quickly. Did a good job !"

With over 13 years of experience. We take great pride in our extreme professionalism, timeliness and superior customer service on every job. We develop lasting relationship so that the next time service is needed there's no question on who to call. Satisfaction guaranteed! Call us today!

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"Everything I spent was very good, they did a very good job. I love the bathroom. They just came in, did the work and they finished when they said they would. I've got 4 quotes and they were the cheapest and the quality was great. No problem at all."

We pride our company on reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

"Absolute amazing!!!!! The best contractors I have ever had the pleasure of dealing with. Prices were extremely competitive, work quality was amazing and I am a very particular/ detail oriented kind of client. Everything was done exactly on time and at the original price quoted, no surprises in price or timing delays AT ALL!!!!!!! I get compliments on the work done by Ameriside from my friends and neighbors all the time, some of which are general contractors themselves. Dave and his crew at Ameriside will always be my first and only go to for any projects that I need their services."

"Amboy Korling and his assistant were extremely polite and professional.  They did nice work, particularly on the door frame, where looks are critical.  They arrived at 8 am, with materials, and set up their table saw on the patio. They plugged it in and began work.  They were finished at about 4 pm, on a job that could easily have taken 2 days.  
They replaced the rotted header for the door with a nice piece of 4x4 lumber.  They replaced the casing for the door, making sure that the original door would still fit.  It looks great and all we need is to have it painted.
They cut and installed extensions for about 40 rafters under the eaves.  The original rafters were rounded at the end so that they would not take a gutter.  The extensions will allow us to get well-placed gutters.  Our present gutters were installed with a crude system that led to the dry rot problem.
The original plan had been for them to add a downspout in the middle of the gutter on one side of the house, but after looking at the relatively simple installation of the gutters they left that out, and cut $200 from the price.  However, they tilted the gutter so that it would drain to the far end: if the original installer had done this, the dry rot wouldn't have happened to begin with.
We're now on our way to having the woodwork of the entire house painted, and new gutters installed, but those are tasks for other contractors.  
This was a great repair to something that I had despaired of getting fixed. 

"

"The people they sent out came out, they came out , I think about 4 or 5 different times. I talked with the technicians and said, "this is ridiculous, the furnace is old" and he said, "we agree, but they only want to do the patching". They would patch it and it would break, they would patch it, and it would break. Finally, I said, "I want a new furnace. What do we have to do to do a new furnace. You've been out here, this is like the 6th time," and he said, "I'll have my manager write something up", and so they did and they replaced the furnace. They tried. They were more interested in patching things than replacing things. They were willing to send out 4 or 5 different parts. The things that I see that would help the most is if it were easier to get a hold of them on the phone or if their website worked. Just being able to contact someone in person. Sometimes, you can't explain everything online. We were able to get a hold of them, we were able to talk to them. It just takes some time, they had to jump through the hoops with their company, we understood that, but they came through and got us a new furnace. A nice new furnace too."