Top-rated doors (exterior) installers and replacers.

Get matched with top doors (exterior) installers and replacers in Port Angeles, WA

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Doors (exterior) installers and replacers in Port Angeles

Avatar for Classen Woodworks
Classen Woodworks
5.0(
2
)
Doors (Exterior) - Install or Replace

Serving Port Angeles, WA and surrounding areas

Approved

In business since 2024

"Donovan is a skilled craftsman. He is professional, honest, and conscientious. He replaced the skirting on our double-wide and, besides making the skirting look better than the house, he made two very nice-looking little doors to allow us to access under our house. He also made a very good suggestion of adding a line of caulk around the house above the skirting. He came in below his estimate. I will definitely hire him again if I have another project."
After
Before
.
.
.

+11

Response time1 day
Response rate90%
Avatar for Steadfast Repairs
Steadfast Repairs
5.0(
2
)
Doors (Exterior) - Install or Replace

Serving Port Angeles, WA and surrounding areas

Approved

Free estimates

Small jobs welcome

Credit card accepted

Hey. My name is Drew with Steadfast Repairs. I'm a General Contractor & Home Repair Specialist serving the Sequim and Port Angeles area. I bring my own tools, ten-plus years of maintenance experience, and a willingness to help with any project. My rate is $50/hour with a $75 minimum service call. Faithful in little; faithful in much!

After
Cedar Sauna Install
Cedar Sauna Install
Before
2 neighbors recently requested a quote
Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)
Doors (Exterior) - Install or Replace

Serving Port Angeles, WA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Avatar for Glass Dollz
Glass Dollz
5.0(
6
)
Doors (Exterior) - Install or Replace

Serving Port Angeles, WA and surrounding areas

Free estimates

Emergency services offered

Credit card accepted

"The owner, Tatyana, came to see the job, she was friendly and professional and gave a very reasonable bid for replacing the panes and the balancers, and for outside washing of all our windows, which we agreed on. She came later with a contract to sign, and I paid half of the contract. After the glass arrived, she came and installed it. She was very quick and competent, and it all looked great when she was done. We were very pleased and would recommend them."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+4

Recommended by100%of homeowners
Ybarra Professional Builders
4.3(
80
)
Doors (Exterior) - Install or Replace

Serving Port Angeles, WA and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Working with the Ybarra team, Daniel, Alfredo, Jacob and Jason was an outstanding experience. We had a large project flattening a slope, installing a retailing wall, cedar fence, pavers, river rock and a railing on our deck. Everything was exactly how we envisioned it and the work was extremely high quality. The team was fast and listened to all of my concerns. There was always someone available to answer my questions throughout the project. Would highly recommend Ybarra for my future projects."
Response time4 days
Recommended by83%of homeowners
Showing 1-10 of 23
FAQs for doors (exterior) installation and replacement projects in Port Angeles, WA

If your entry bakes in direct sun, fiberglass is the clear winner. The material shrugs off extreme heat, stays energy-efficient, and won’t warp or fade the way wood sometimes can. Paired with low-E or UV-blocking glass, a quality fiberglass door keeps hot air out, cool air in, and should serve you reliably for roughly two decades.

A seasoned door pro can hang a replacement door in two to four hours—mounting the slab, tweaking the fit, and adding hinges, knobs, and weatherstripping. If the jamb needs repairs or you’re cutting a brand-new opening, plan on extra time so everything lines up and seals tightly. Either way, most projects wrap up in a single afternoon.

The Port Angeles, WA homeowners’ guide to doors (exterior) installations and replacements

From average costs to expert advice, get all the answers you need to get your job done.