Top-rated doors (interior) installers and replacers.

Get matched with top doors (interior) installers and replacers in Rogerson, ID

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Doors (interior) installers and replacers in Rogerson

Avatar for R & W Property Solutions
R & W Property Solutions
4.9(
11
)

Serving Rogerson, ID and surrounding areas

Approved

Super Service Award Winner

In business since 2024

Free estimates

Small jobs welcome

We pride our company on 40 years of reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!\n\nCash, check

bathroom remodle
reframed wall and Walkin
finished
finish
Drive way repair

+15

Response time7 hrs
Response rate97%
Avatar for Part Time Appliance Repair LLC
Part Time Appliance Repair LLC
5.0(
8
)

Serving Rogerson, ID and surrounding areas

Approved

In business since 2021

Emergency services offered

Small jobs welcome

"Peter removed and then replaced baseboards for our new flooring installation. Peter was very professional throughout the project. He made reasonable estimates for the work, arrived and completed the work on time and on budget. He was wonderfully detail-oriented and careful with his work. I highly recommend him for any job he takes on."
Cold, wet, and muddy
I think it was about 4 or 5 feet down
Fun project to dig into in the winter
All done
Built an outhouse

+21

Response time1 day
Response rate89%
4 neighbors recently requested a quote
Avatar for Garling Enterprises Inc.
Garling Enterprises Inc.
5.0(
5
)

Serving Rogerson, ID and surrounding areas

Approved

In business since 2005

Free estimates

Emergency services offered

With over 20 years of experience. Looking for a reliable general contractor in Twin Falls who can handle both small repairs and major remodeling projects? I’m Jake Garling, owner of Garling Enterprises. With over 20 years of experience in remodeling and real estate, I take pride in delivering honest, skilled workmanship and dependable results for every project, from bathroom, kitchen or whole home remodels to roofing, siding, concrete work, and more.

Bath tile backsplash
Bath tile backsplash
High end bath remod
High end bath remod
High end bath remod

+8

5 neighbors recently requested a quote
Avatar for Patterson Handyman
Patterson Handyman
5.0(
1
)

Serving Rogerson, ID and surrounding areas

Approved

In business since 2015

Free estimates

Small jobs welcome

We at Patterson Handyman strive for reliability, great communication, integrity, and quality work. We are experts in our trade and will do our best to keep you as educated as we can on your particular task or project. We look forward to earning your business!

Response time3 days
Recommended by100%of homeowners
Sentinel Customs, LLC
New to Angi

Serving Rogerson, ID and surrounding areas

Approved

In business since 2015

Free estimates

We are a locally owned and operated company that values honesty and integrity, and treats your project as if it were our own. We offer a variety of services that are customization to each individual project. You will find us to be competitively priced, paying close attention to the details of each and every project that we are involved with. We look forward to building lasting relationships, and guarantee your satisfaction!\n

Avatar for Arkansas Wood Doors
Arkansas Wood Doors
5.0(
8
)

Serving Rogerson, ID and surrounding areas

In business since 1977

Free estimates

Credit card accepted

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"
Additional Photos
Additional Photos
.
Additional Photos
Additional Photos

+1

Recommended by100%of homeowners
Mikita Construction
4.6(
21
)

Serving Rogerson, ID and surrounding areas

In business since 2000

Free estimates

Emergency services offered

"Paul came right out to look at the patio. He put me in touch with a roofer, who unethically tried to cut Paul out of the picture, and was also not available right away. Paul quickly found me a new roofer that came out promptly and removed the old roof. Paul then replaced all of the damaged wood and painted it to match the existing roof bays. The roofer returned to re-roof the patio. They did a good job and finished in a timely manner. Paul was very pleasant and easy to work with. He followed through on what he said he would do. My only suggestion for improvement would be to provide a more official receipt. Because it was part of a real estate transaction, by law I needed to provide the buyer with a receipt for the work that was done. I did get a receipt, but it was an email stating what work had been done, instead of a normal receipt. The realtors accepted it, but both said a real receipt would have been better."
Recommended by100%of homeowners
Avatar for DH & K Construction
DH & K Construction
4.8(
6
)

Serving Rogerson, ID and surrounding areas

In business since 2009

Free estimates

Warranties offered

"My job had many facets as I was selling the home. Dan bid all the work in a timely manner, handled all repairs structural and punch list on time and on budget. He documented all structural repairs with photos. Dan advised on how to proceed on repairs after the structural engineer had given his report. I had water damage that involved ripping the entire bath tub area and sub floor out with structural studs needing replacement. We never met face to face only by phone and email. Dan is honest true to his word and was a pleasure to work with. I would hire him again and again. My phone calls were always returned bids accurate and on time, job completed as scheduled."
Awning
Awning
Awning
Awning
Awning (Vinyl)

+17

Response time1 day
Response rate85%
Recommended by100%of homeowners
Avatar for American Home Shield – Home Warranty
American Home Shield – Home Warranty
3.5(
5,688
)

Serving Rogerson, ID and surrounding areas

In business since 1971

Credit card accepted

"AHS is ok. They cover repairs of most everything under the roof of your house. The companies that contract with them are not always the best. You call AHS with the issue, they send a fax to the repair company and give you the contact info. If they don't contact you within 24 hours, you call them. Sometimes they answer, sometimes they don't. When they arrive (usually three days or so later), they service the item. if it has issues within the 90 days, you call AHS again, they are sent out with no charge. If the serviceman decides the unit is unrepairable, AHS will allow you to choose a replacement from their listing (usually not as good as what you have) they will install and remove your old item, or give you wholesale amount to buy and install your own. Prices vary on what you want covered and what you want the copay to be, plus where you live. For me it is 49.99 per month with a 75.00 time of service order. You can have more than one item serviced at the same time under the same fee. If you have a SEAR product the repair guys are great. Not that wild about the other ones they send out. But it is a big savings compared to calling someone on your own. The cost of service is only the 75.00 copay."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+2

Recommended by65%of homeowners
Showing 1-10 of 28
FAQs for doors (interior) installation and replacement projects in Rogerson, ID

If your existing frame is in good shape, you can replace an interior door without changing the frame. This is a budget-friendly option because it saves on the cost of removing and installing a new frame. By choosing a slab door that fits your current frame, you'll save on labor and materials. Just make sure the new door matches the old one's dimensions for a smooth replacement.

Standard interior doors are 80 inches tall and range from 28 to 32 inches wide. Interior doors vary from 24 to 36 inches wide, depending on their purpose and the available space. Building codes require interior doors to be at least 80 inches tall and 24 inches wide. Knowing standard sizes helps you select a new door that fits properly in your existing opening.

It costs $600 to $2,000 or more to move an inside door. The total price depends on your location, the type of door, and materials needed to complete the project. Moving an interior door requires walling up the leftover space and opening up a new wall where you want the door to go instead. You’ll also want to plan for the expense of framing the new wall opening and adding trim.

Exterior door installation costs an average of $1,175, with a typical range of $525 to $1,800. The higher expense compared to the cost of interior doors comes from the need for exterior doors to be weather-proofed and they are often made of thicker, more durable materials. The associated exterior hardware must also be able to withstand harsh weather, so these cost more as well.

It costs between $300 to $2,500 to make a doorway wider on average. However, the wider you need the space to be, the more it will cost. Some homeowners choose to widen interior doorways to make the house more wheelchair accessible. In order to be wheelchair accessible, an interior door needs to be at least 32 to 36 inches wide. Also, some older homes just have narrow doorways due to the nature of how homes were built differently many decades ago.

It takes between two to five hours for a professional door installer to install an interior door, depending on complexity and materials. A pre-hung door typically takes around two hours, and larger doors like double French doors can take up to five hours. If you’re doing the project yourself, expect it to take a little longer than that, especially if you have little to no experience completing this type of project. Keep in mind that a pre-hung door can be installed about an hour or two faster than a slab door.

The Rogerson, ID homeowners’ guide to doors (interior) installations and replacements

From average costs to expert advice, get all the answers you need to get your job done.