Top-rated baseboard installers.

Get matched with top baseboard installers in Vernon, FL

Enter your zip and get matched with up to 3 pros

Matching on HomeAdvisor

Share some details icon
Share some details about your home project.
Match with local pros icon
Within moments, match with highly-rated local pros.
Compare quotes icon
Compare quotes and choose the best pro for the job.

Find Baseboard installers in Vernon

Avatar for Evolution construction group
Evolution construction group
5.0(
7
)
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

Approved

In business since 2017

Free estimates

Credit card accepted

"The installation and full kitchen remodel by Evolution construction, including the quartz and granite work, turned out absolutely perfect. The cabinets were finished with a high-gloss matte relief, and the transformation of my kitchen was truly from 0 to 100. I’m very happy I chose to work with them. They completed the project within the agreed timeline, and I didn’t experience any issues throughout the process. From the moment they started until the final day, there were no delays and the team remained fully committed. I’m truly grateful to Evolution construction for the outstanding job they did on my property."
Bathroom remodel
kitchen remodel
Exterior Painting
deck build
interior painting at oak

+1

Response time3 days
Avatar for Golden Hammer Remodel
Golden Hammer Remodel
4.7(
22
)
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

Approved

Super Service Award Winner

In business since 2010

Free estimates

Small jobs welcome

"I needed a newly purchased rug and pad installed in my master bedroom with a king size bed and a large dresser mirror on top of it. Kevin with Golden Hammer Remodel accomplished the task with finesse by himself at a very reasonable price. I would highly recommend him for most any handyman job out there."
Response time8 hrs
Response rate100%
16 neighbors recently requested a quote
Avatar for JB70 Enterprises
JB70 Enterprises
New to Angi
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

With over 34 years in the construction industry I strive to provide quality services at reasonable rates. \nFrom the smallest fixs to the major repairs, all jobs receive the same attention to care, and detail that a quality job requires. \n

Bathroom update
2 neighbors recently requested a quote
One Man Show OBX, LLC
New to Angi
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

Approved

In business since 2022

Free estimates

Credit card accepted

One Man Show OBX brings an unmatched commitment to excellence to your home repair projects. I have over 40 years of experience delivering unsurpassed professionalism, expertise, and value. I take pride in providing my customers with personalized service, the highest industry standards, and top-quality workmanship. References available upon request. Give me a call today!

6 neighbors recently requested a quote
B’s Home Renovation & Decks
New to Angi
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

Approved

Free estimates

Emergency services offered

Warranties offered

Hello, My name is Brad Phillips. I own B’s Home Renovation and Decks. Me and my wife have five beautiful children that we cherish and adore. We provide a good foundation morally and instill financial responsibility and trust. \n\nOur business is our livelihood. With that being said we are here to please the clients that choose B’s for their Reno Project. The trust it takes for people to allow us access into their homes is massive. We take that very seriously here. We won’t take a project on unless we are confident we can please our homeowners. Our mission is to provide services that exceed expectations. In today’s world this is hard to come by but we strive everyday for excellence. \n\nAt B’s we can install and repair metal roofing. Repair shingle roofing. Repair leaking roof. Build decks. Install pole barns. Install flooring. Tear out and replace flooring. Paint interior or exterior of home. Paint newly installed concrete or refinish old. Remodel bathrooms. Install kitchen cabinets.

1 neighbors recently requested a quote
Trey Bruce
New to Angi
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

Approved

I provide carpentry solutions and handyman services for central and south Alabama, South Georgia and North Florida. My education background is in Finance from Auburn University, but my passion has always been woodwork. My start in carpentry/ construction began in general woodwork for custom home builders on Lake Martin in central Alabama. Due to the good fortune of connecting with trusting clientele, I have expanded my list of providable services over the years since this time! It is my opinion that my core competency and overall value offering eliminates the two largest setbacks that consistently prove to be problematic in this line of work… Communication and Price. I provide a solution to what seems to be the newfound industry standard of “subcontractors.” Cut out all the miscommunication that comes from discussing your project with one person, just to have another person complete it. If the person you are paying is not the person completing the work, you are PAYING TOO MUCH!

Avatar for Reach Higher Painting
Reach Higher Painting
4.6(
84
)
Interior Trim and Decorative Moldings - Install

Serving Vernon, FL and surrounding areas

In business since 2009

Free estimates

Emergency services offered

"For the most part, the painting went well. The painters were nice, but there was definitely a lack of attention to details. Thus, there are areas of opportunity for improvement. 1. Obvious nails in the wall were not removed and caulked unless they were explicitly asked to do so. 2. Items were not properly covered; paint got on a pair of jeans which I had to throw out. Paint also got on my bedspread in the master bedroom as well as on my dryer in the laundry room. 3. The baseboard was not painted properly. The existing paint was just touched up in small areas. 4. On the last day which was a Friday, they seemed to be in a rush to finish and leave. As a result, they did not clean up properly after finishing. The only exceptions were re-hanging the curtains and moving back the large furniture such as the wall unit and sofa. 5. Also, some walls needed a second coat of paint and areas around the bathroom mirrors were missed. They had to come back the following Saturday to finish the job."
Additional Photos
Additional Photos
Additional Photos
Additional Photos
Additional Photos

+9

Recommended by92%of homeowners
...
Showing 1-10 of 97
FAQs for baseboard installation projects in Vernon, FL

Installing crown molding can be challenging, depending on the material and your skill level. Lightweight materials like polystyrene and softwoods are easier for homeowners to install themselves, offering a cost-saving option. However, heavier materials like hardwoods and plaster are difficult to work with and require professional installation to achieve a high-quality result. Precision is crucial in measuring, cutting, and fitting crown molding, so hiring a professional ensures the best outcome.

Crown molding is available at various price points, ranging from $1 to $30 per linear foot, depending on the material. This wide range offers options for every budget. Affordable materials like MDF, PVC, and polystyrene provide cost-effective solutions, while premium materials like exotic hardwoods or metal offer a luxurious appearance at a higher cost. Regardless of your budget, you can find crown molding that enhances your home's aesthetic.

Crown molding is installed by professional finish carpenters or painters who specialize in detailed trim work. These experts possess the necessary skills and tools to ensure precise measurements, accurate cuts, and seamless installation. By hiring a professional, you can achieve a flawless finish that enhances your home's aesthetic appeal without the risk of common DIY mistakes.

Crown molding can be installed in various areas of your house to add elegance and architectural interest. It is commonly used where walls meet the ceiling, but you can also place crown molding around doors, windows, mirrors, and atop cabinets. Installing crown molding in these locations enhances visual appeal, creates a cohesive design, and adds a touch of sophistication to your home's interior.

To determine how much crown molding to purchase, start by measuring the length of each wall where you plan to install crown molding and add the measurements together to determine the total linear feet required. Purchase an extra 10% of material to account for waste from cutting angles and to ensure seamless joints by using full-length pieces when possible. Including additional material helps avoid shortages and ensures a smooth installation process.

For a professional crown molding installer, this task takes about 1 to 3 hours per room, depending on size and complexity. Factors like the material, design intricacy, and number of corners can affect the time. If you're doing it yourself, expect it to take longer as you get the hang of measuring and cutting precise angles. Advanced measuring and planning or hiring a pro can help the project go smoothly.