Get matched with top sump pump or interior foundation drains installers in Woburn, MA

"Petros came within the same day and was able to fix/verify that our drain was installed correctly. Very happy and will absolutely hire him again."

"Joe,James and Bobby did an excellent job replacing the sump pump And drains. My husband and I were so impressed with their abilities and how hard working they were. I would highly recommend Ground works Manchester to anyone who needs the same work done. Thanks to all the gentlemen for their professionalism and work ethic"

"I did everything I can to clear the blockage in my kitchen sink drain but it is totally blocked. I called Milltown Plumbing in the morning and they expected to send someone over later the day or the next day depends on how quick they can finish other works. They keep me updated when they can send someone over on the same day. Pedro came and fixed the blockage in no time with no mess. He is professional, kind and considerate. I'd rate their service 6 stars if it exists."

"Topic is a home water supply Shallow Well which operates with a shallow well jet pump + pressure tank installed in the basement. I had been collecting parts over the summer, as I knew the original to house jet pump would go out soon some day and with covid parts are hard to get quick, so started collecting ahead of time. Glad I did as the pump started leaking, from the housing. Replacement needed. Not an emergency but time to get it replaced. Was a ticking clock as it also looked like the pump was twisting putting stress on piping as original owner did not mount it and other fittings had large amounts of corrosion on them. I supplied these parts for the job: new 1hp jet pump, 44 Gal. pressure tank with T package, water filter housing, brass fittings, brass check valve, brass ball valves, 1" copper pipe and some copper fitting, and 2x10 pressure treated board to mount the pump/board to the floor with concrete anchors. Called up Sila on 10/14, master plumber Dave was available on 10/16 to come quote the job of installing what I supplied and misc. parts still needed. Talked with me and received my requests for specific design wants and he supplied his opinions & additional ideas and other options like wall mounting of water filter, sensor shutoff option and different water filter all together and we worked out the plan, did not do the different filter or sensor though. Talked about brass pipe and fittings at the pump up to the pressure tank and we agreed what I had purchased was good and would last a lifetime, vs copper all the way which would still last a long time. Quoted $2800 with water filter bypassing and $2600 without the water filter bypassing. Job was scheduled for 10/22. Quote was high level line item as listed here. Came a bit late on 10/14, due to an emergency call, no big deal Dave called to let me know. Was on time for installation on 10/22, 7:30am. Two workers on Job (Dave + 1, sorry I’m horrible with names +1 was an electrician and was helping Dave) Job took ~ 8 hours to finish. What was not able to be completed: Was not able to replace old original check valve. Well started to suck air when old was started to be removed, confirming there is no foot valve on the line or a broken one, so old check valve was kept. Concern was not being able to recover from air going down the well pipe causing priming issues. At this point the job would require a well expert and was not able to be replaced by Sila. What part of job was mis-understood: Mounting of jet pump to board/floor. Ended up missing the concrete anchors to start and installing after the fact with a different method. Made it more difficult to mount the pump and did scratch the rust proof paint. But it got done. Nice and sturdy. What was complicated on the job: Something that should have not been an issue at all went wrong. I had purchased 1” brass unions. There were two unions installed. One was found to be causing leaks during the initial job installation. This caused extra rework during the initial job. After job completion and area dried with a fan, it was found that both unions were leaking. The original one that had issues in the initial job and the 2nd one. One is pre pump and one is post pump. Called Sila office on 10/23 and told them what was happening, Dave’s earliest availability to come back was was 10/26. He was on time on 10/26. Dave stated that 1 union was giving trouble and replaced it with one spare that I had also purchased. When looking at the 2nd union again he was not able to get it to seal and he made the call and changed the design to direct copper connection and no union, I did not object as at this point just wanted the job done. No More leaks on that location, but also no ability to easily break the connection for future maintenance. When left no leaks. However, after using water for a while the 1st union started leaking again. Texted Dave direct with a picture and said he could return on 10/28 and I requested him to bring a union from his supply. Arrived when he could with ~ 1hr notice and replaced the union with one of his. When looking closer at the issue unions that I had purchased it was found they were cracking. Summary: I’m a novice in pluming, reason for calling Sila. I wish Dave would have noticed the poor part / crack issue and replaced unions from his stock on day 1. I was trying to save time by collecting parts over time and ended up causing issues. Dave knew he was working with brass and seems like he did not have backup stock on site incase of issues. Wish he did as I’d have two unions… and he would not have had to come back twice to repair the leaks. The call was made to not use the brass ball valves I purchased so it was clear that my parts were recommended to use but not absolute. Overall Dave and team did a great job, it’s clean, organized, valves and drain spickets installed nice and logically, filter is at good height, job completed like I asked and planned with Dave, except for the above jet pump mounting, union issue and check valve replacement discussion above here. Dave and team was professional and focused to get the job done. Thanks Dave for your hard work. Reason for Rating: I am giving this job an A rating based on the end result, Sila stood by the workmanship and resolved the issues that arose. That is a sign of a great company. If I would not have supplied the couplers that issue would not have happened ultimately and the check valve & well priming issue was just out of reach and would have required a well specialist to complete. The pump mounting was probably just lost in the large amount of details we had discussed, again it is mounted sturdy."

"Fantastic. Jeff is a pro. Installation went as described in both locations. He came back Immediately when I had a water gauge issue for my water meter ( installed 7 years ago) and replaced it on the spot. Jeff is professional, punctual, cleans up, old furnace removal and does great work. I’m very happy with my 2 new efficient heaters and hot water heaters! My heating costs are down substantially! I’m glad we chose Jeff."

"Mike was superb. The job required perseverance and Mike's never give up attitude paid off while working on my old house. The odyssey began when Mike tried to install the faucet I purchased. It did not fit. He went to a trade supple house in search of another that also did not fit. He was instrumental in getting the showroom to take the wrong one back, and recommended a helpful sales person who helped me buy an appropriate one. On the next visit we discovered that the holes were not drilled correctly, so the new faucet would not fit. Mike installed an inexpensive one for us to use until he could buy a special drill bit for cutting granite. Mike deftly enlarged the mounting hole, which was no small feat given the counter/sing/backsplash setup. He did so without damaging anything or creating a mess. He's also very personable and comfortable to be around and in the house. highly recommended."

"Zach was fantastic. Professional, reliable, and extremely knowledgeable. The sump pump installation was done perfectly, and zach took the time to explain everything. Clean work, fair pricing, and great communication. I’d absolutely recommend Zach and would hire him again without hesitation."

"NETR always provides top notch service and knowledge. I have used them for both installation of a mini split as well as ongoing maintenance and service. Highly recommend them."

"This is my sixth time using the service from Andrew at Local Plumbing and Heating. He is quickly available, efficient and thoughtful. He is trustworthy: I know he will take care of everything I asked for and thinking ahead for great ideas. I used his service for major home projects and I strongly recommend him for everything: from water heater tank replacement to gas lines installations."

"Justin and Cam, the technicians, did a great job. We have an old farmhouse with a very strange configuration of partial crawlspace and partial full basement, and water was leaking through the fieldstone foundation wall from the crawlspace. They quickly diagnosed that the problem was coming from 1 or 2 zones of the hot water radiator heating system, and they were able to shut off those zones to stop the leak, while allowing the house to still use water for sinks, toilets, and showers. We'll have to do more work later to replace pipes to the radiator but, because they are hard to access, we need to plan ahead for some construction work. I'm fully satisfied that these guys were able to find the problem and give us even a temporary solution that allows us to have our working plumbing again without the basement getting wet. Would definitely work with them again."