Get matched with top furnace / forced air heating system install or replace pros in Mendota, CA

"Serviced the entire unit, cleaned and replaced filter. Replaced ignition control module because it kept tripping off when it approached a high heat.
"

"Overall, the project went very well. They did push our initial installation date back by 3 weeks but once here, they put in the hours to get it done in a timely manner. I especially appreciated the professionalism of Keith, Pedro C and Kody M. They put in 2 new units with new duct work to fix the balance issues that we were having in our 3200 sq ft home. Now, the temperature in our home is consistent in the various rooms which has been a problem over the past 20 years. Keith said that the project was underbid by error but they stuck to the quote that was given to us. We had several men from the company working on the project. By far, Pedro C and Kody M stood out and were top notch paying attention to detail and cleaning up after themselves on a daily basis. It was very hot and they stayed late to make sure that we had air conditioning over the weekend. The bottom line is that they did not cut corners and were neat and professional and most importantly delivered on their promise to give us a system that works well. I have already recommended them to 2 of my friends/family."

"As a homeowner in Clovis, CA, I couldn’t be happier with the AC service repair I received from Roo’s Heating and Air Conditioning. From the moment I called, I felt like I was in good hands — they scheduled me quickly, showed up on time, and took the time to explain exactly what was wrong with my AC unit. The technician was friendly, professional, and worked efficiently to get my system up and running again, which made a huge difference in this Clovis heat! I really appreciated their honesty and fair pricing, and I wouldn’t hesitate to call them again or recommend them to friends needing air conditioning repair or HVAC services."

"We recently had Mega Power Electric Inc install a solar system and panels. The President and provided excellent communication all the way through the process. He even met with us after installation to explain the almost incomprehensible PG&E bill. Although not the least expensive bid, his was competitive and I felt he was as interested in educating me about solar and the various types of panels and inverter systems as he was in selling a system. He demonstrated how the array of panels would meet our energy needs and as opposed to some of the other companies, wasn't selling us more than we needed. We are very satisfied with our solar system and I highly recommended Mega Power Electric Inc."

"He does excellent high quality work! My wife and I are very happy with our new ac system. He took has time and made sure we were happy before he left. Thank you Longs heating and air."

"Great job and great furnace"

"Tech was earlier than quoted which was awesome. Jacob was very informative and kind. I will definitely call Energy Smart for future service."

"Excellent service, very fast response to my request for service, picked up laptop, diagnosed issues. Initially thought it was an OS update issue but the hard drive had failed along with other components (including 'CPU). Because other components were involved, a new solid state hard drive was put into a laptop with a working processor - same type CPU as in the failed unit. The laptop was repaired and returned in less than a week. This company picked up and dropped off the laptop (driving from Huntsville, AL (about 60-70 minutes)-- great service in this covid environment. I would recommend this company to my family./friends and will use again."

"Background:
I picked the wrong type duct cleaing service.  Subsequently I have learned tthere are two main types of duct cleaning services... and I have found they are not equal in their cleaning ability. 
The first type uses a truck mounted large industrial-sized vacuum that is attached to the heating system with large flexible fabric 'hoses"  and sucks large volumes of air through the ducts simultaneously as a pneumatic "beater / flailing wand" is manually threaded by the operator though the ducts to loosen dust and debris contained within the ducts.  The wand is flexible and snakes around bends and right angle corners in the ducts.  The loosened dirt is then rapidly drawn out of the duct and into the vacuum bag filters in the truck.  All the vacuum machinery remains outdoors in the street or your driveway.  I've heard this referred to as a "negative pressure" type duct cleaning system.  This system requires somewhat more time to set up and a sizeable investment in equipment.  This is the type cleaning system I assumed would be used... but wasn't.  It was my fault that I was not aware that other types of duct cleaning systems existed... and therefore did not verify what type system that would be used on my job. 
It turns out the second type duct cleaning system is one that uses a rotating brush mounted on the end of long hose attached to a man-portable vacuum cart that is wheeled into and through your home (about the size of a patio barbeque).  The grills on your home's heating outlets and return air inlets are removed and the hose with rotating brush on the end is inserted into each outlet and inlet by the operator.  The hose is then pushed as far down each duct as the hose length will allow (usually 30' to 35' for the 40' hoses commonly used).  The hose typically does not go around right angle bends.  The vacuum hose then sucks up dust and debris loosened by the rotating brush... but only for duct lengths not exceeding the hose access length.    I've heard this referred to as a "roto-brush" type duct cleaning system.  This system requires much less time to set up...a much much smaller investment in equipment and can easily be transported in the back of a family SUV.  This is the type of duct cleaning system that was used on my job... but I wasn't expecting.  Again, this was my problem that I did not verify the type of system to be used. 
Aegis used a roto-brush system which didn't have a vacuum hose length adequate to access the full length of my home's ducts as it turns out.  I was not told of this situation... and the operators themselves may not have been aware of it... although they should have been.  I believe they said their hose was 40' long.  Unknown to me... but discovered a week or so later... large lengths (at least 6' to 8') of my ducts were not cleaned at all due to inadeqate hose length and/or inability to negotiate around duct bends.  Also I found that remaining dust and debris was still visable through the open outlet & inlet ducts immediately upon "completion" of the cleaning job.  I called this to the attention of the operator (while he was still on site)... who then re-cleaned these duct spaces.  This made me wonder what else hadn't been cleaned adequately.  I later found out. 
Although the two operators turning up to do the job were polite and accommodating... they did not impress me as being very professional.  Hip-hop shorts, raggedy T-shirts and flip-flops did not strike me as appropriate dress for a professional service coming into a person's home.  They arrived in an unmarked personal SUV with out-of-state plates (Calif.  I think) with the roto-brush machine loaded in the back.  After being on the job site for a few minutes...one of the two operators said he had a headache and needed to go to a drug store to get some aspirin.  He didn't return until the job was nearly completed by the second operator in a little over an hour or so. 
Their job price was about half of what I have paid in the past for professional duct cleaning by a contractor using a negative pressure duct cleaning system.   I mistakenly assumed I would be getting the same type service... but at half the price.  My error.  In the future I will only engage contractors using the negative pressure type system and specializing in duct cleaning.  To me it's worth the added price given the better results I've experience with negative pressure vacuum systems. 
For those homeowners having duct work compatible with a roto-brush cleaning system (shorter staight duct runs, no sharp duct bends, visibility allowing verification the cleaning has been done adequately, etc.)... I would check out several contractors before selecting one... to find one that is conscientious, professional and effective. 
I did not follow-up with the contractor to complain or request a re-cleaning.  I figured it would not be worth the effort given the nature of their roto-brush system and the hose lengths of their vacuum.  I simply manually vacuumed out the uncleaned sections of duct work myself as best I could... when I later had the furnace taken apart for unrelated repairs.  But, all things considered... I personally will not use Aegis again.
"

"I evaluated 5 bids for my rooftop PV installation: 4 local firms and one regional firm (NRG). I was very glad to have chosen NRG. Their bid was the cheapest by a significant margin. The site survey, design and installation process was quick and smooth, despite the tribulations of the ongoing COVID-19 threat. Production from the system is exceeding specification, and my first monthly electric bill was -$15."