Compare Quotes from up to 3 Pros

Top Insulation Contractors in PocatelloID

Find your local pros

How It Works

  1. Answer a few questions about your home project.
  2. Within seconds, get matched with top-rated local pros.
  3. Compare quotes and choose the best pro for the job.

Featured Service Pros

  • Diaz Insulation LLC

    • Elite Service
    • Warranties
    • Free Estimates
    Posted by David K.on 08/23/2022

    Incredible service. They keep me informed every step of the way. They gave me an exact time for a quote and came back two hours later to do the job. They exceeded expectations with the depth of insulation and quality. This father and son duo immediately went to work and finished in an hour. The price was extremely reasonable and they were prepared for working in my 1923 home. Best contracting experience in Idaho Falls!

    Showing 1-1 of 1 results

    Out of Network Insulation Contractors in Pocatello, ID

    Frequently Asked Questions

    What is insulation?

    +

    Insulation is material that provides a barrier within a home’s walls, ceilings, and floors to regulate temperature and noise. If your home gets overly hot in the summer and cold in the winter, it’s likely not insulated properly.

    Insulation efficiency is measured by R-value, which determines how resistant different types of insulation are to heat flow (or energy loss). R-values are measured by inch of thickness. The higher the R-value, the better the performance and the higher the price.

    How much does insulation cost?

    +

    Our project data lists insulation costs between $1,400 and $6,300, but your final price will depend on the type of insulation you choose, its R-value, and how much you need.

    • Fiberglass insulation: $0.30 – $1.50
    • Blown-in insulation: $1 – $2
    • Spray foam insulation: $0.50 – $2
    • Radiant insulation: $0.20 – $1
    • Rigid board insulation: $0.25 – $1

    Luckily, insulation is one of the best investments you can make in your home—it has an ROI of at least 100%, meaning you’ll likely make back what you spend in a few years or so.

    What is insulation made of?

    +

    Insulation is made of many different materials, which can also impact the R-value needed for energy efficiency.

    • Fiberglass: The most common insulation material made from glass. Fiberglass is a skin and lung irritant, so you’ll need to wear gloves and clothing when working with fiberglass insulation.
    • Cellulose: Made from recycled paper products, plus borate for fire and insect resistance.
    • Foam: Made from polystyrene, polyisocyanurate, or polyurethane plastic. You can also install cement-based foam insulation using rigid foam boards.
    • Mineral wool: Made of fire-resistant rock wool, a mix of natural materials, or slag wool, made from a molten metal product.
    • Natural fibers: Made from various recycled natural materials, including cotton, sheep’s wool, and straw.

    Where is insulation in a house?

    +

    If your attic is unfinished or you’ve ever demolished an interior wall, you might notice batt or spray foam insulation between the studs. Putting insulation between your walls and floors helps keep your home comfortable and your energy costs down. In addition to walls and attics, you can install insulation in your garage, in floors above vented crawl spaces, and basements.

    • Garage Insulation: $0.50 to $1.25 per square foot
    • Floor and crawl space insulation: $1 to $5 per square foot
    • Basement insulation: $1.50 to $2.50 per square foot
    • Wall insulation: $1 to $4 per square foot
    • Attic insulation: $1,500 to $6,000
    • Roof insulation: $1,500 to $4,500 or more

    What are the different types of insulation?

    +

    There are a few types of home insulation, and they all are made of different materials— most commonly, fiberglass, cellulose, and foam. Insulation includes these materials in the following forms:

    • Loose-fill: Also called “blown-in,” loose-fill is sprayed into wall cavities, attics, and other oddly-shaped areas using special equipment. This insulation is usually made of fiberglass, cellulose, or mineral wool.
    • Batts: An affordable insulation blanket best for unfinished spaces, such as between framing, studs, or joists. They come in pre-cut sections suitable for DIY installation and are mostly made from fiberglass, though other versions are also available.
    • Rolls: Similar to batt insulation, but comes in rolls. Its make-up leaves less chance for gaps between sections and is more efficient than other types.
    • Foam board: One of the most popular insulation types that can be used almost anywhere in your home. Foam boards also have a high R-value.
    • Spray foam: Expands and hardens to fill gaps, small and large. Can be closed-cell or open-cell, but closed-cell has a higher R-value, making it more expensive per square foot.
    • Radiant barriers: Does not reduce heat flow but directs heat away from the home instead. Radiant barriers are DIY-friendly and affordable, but they won’t be as effective in the winter months.

    Top Insulation Projects

    HomeAdvisor Community Rating

    Overall Rating:

    Pocatello Insulation Contractors are rated 5.0 out of 5 based on 9 reviews of 1 pros.

    The HomeAdvisor Community Rating is an overall rating based on verified reviews and feedback from our community of homeowners that have been connected with service professionals. See individual business pages for full, detailed reviews.


    Other Top Projects in Your Area

    Other Cities in Idaho

    If you're looking for Insulation Contractors that serve a different city in Idaho, here are some popular suggestions:

    Find additional Idaho Insulation Contractors

    HomeAdvisor: The nation's largest network of screened and rated pros.

    Find Insulation Pros in Pocatello,ID

    Tell us about your project and we'll match you to the perfect pros.

    Get Matched With Pros

    Find Pros Nearby

    Do you provide these professional services?

    Find out how HomeAdvisor can help your business

    See Local Demand

    See Recent Leads

    Recent Job Requests for Insulation Contractors in Pocatello, ID

    • Project: Install Spray Foam Insulation
      Location: Pocatello, ID
      Date: 11/16/22
      Nature of Project: Insulation for existing home
      Location of Installation: Foundation walls
      Location of Installation: Non-masonry walls
      Location of Installation: Roof
      Location: Home/Residence
      Desired Completion Date: Within 1 week
      Request Stage: Planning & Budgeting
      Area Description: Wall framing is exposed / unfinished
      Comment: Remodeling my 800 sq ft home and need to spray foam my walls and roof and down to the walls as well as my foundation and underneath the floor have crawl space for access.
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 11/10/22
      Location: Home/Residence
      What type of insulation do you want?: Blown-in
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Comment: Need blown in insulation in attic (30+ years since anything has been done) also an area in garage needs batt insulation
    • Project: Install Spray Foam Insulation
      Location: Pocatello, ID
      Date: 11/10/22
      Nature of Project: Repair/Replace existing insulation
      Location of Installation: Non-masonry walls
      Location: Business
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Property Owner: No
      Area Description: Wall framing is exposed / unfinished
      Are you interested in financing?: No
    • Project: Install or Upgrade Batt, Rolled or Reflective Insulation
      Location: Pocatello, ID
      Date: 11/01/22
      Nature of Project: Insulation for new construction/addition
      Type of Insulation: Want recommendation
      Location of Installation: Ceiling
      Other Services Selected: Interior sound proofing
      Location: Home/Residence
      Desired Completion Date: 1 - 2 weeks
      Request Stage: Ready to Hire
      Comment: Sound proof 19x28 room
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 10/30/22
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Property Owner: Yes
      Are you interested in financing?: No
      Comment: I would like to get an estimate for Install or Upgrade Blown-In Insulation...
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 10/25/22
      Location: Home/Residence
      What type of insulation do you want?: Blown-in
      Desired Completion Date: More than 2 weeks
      Request Stage: Planning & Budgeting
      Comment: F first of all I would like to get my rooftop checked out and fixed because they are there are a couple leaks before any of the insulation would go in is there any way you can give me advice and tell me how to get a hold of a person who does roof?
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 10/22/22
      Location: Home/Residence
      What type of insulation do you want?: Blown-in
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Property Owner: Yes
      Are you interested in financing?: No
      Comment: I would like to get an estimate for insulation for roof
    • Project: Install or Upgrade Batt, Rolled or Reflective Insulation
      Location: Pocatello, ID
      Date: 10/19/22
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Property Owner: Yes
      Are you interested in financing?: No
      Comment: I would like to get an estimate for insulation for the Ceiling.
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 10/16/22
      Location: Home/Residence
      What type of insulation do you want?: Blown-in
      Desired Completion Date: Timing is flexible
      Request Stage: Planning & Budgeting
      Comment: I need a quote for my attic
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 09/27/22
      Location: Home/Residence
      What type of insulation do you want?: Blown-in
      Desired Completion Date: Timing is flexible
      Request Stage: Ready to Hire
      Comment: Would like quote on installing additional insulation in my attic for my house.
    • Project: Install or Upgrade Blown-In Insulation
      Location: Pocatello, ID
      Date: 09/15/22
      Nature of Project: Insulation for existing home
      Location of Installation: Non-masonry walls
      Other Services Selected: Energy saving radiant barrier protection
      Location: Home/Residence
      Desired Completion Date: Timing is flexible
      Request Stage: Planning & Budgeting

    References Available
    Tell us your zip code to view pricing & schedule
    Tell us your location to view pricing & schedule
    Choose your project to view pricing & schedule

    Please enter valid zip.

    Please choose a location.

    We're sorry but the time you have chosen is no longer available.
    Please select a new time below:
    does not provide service to View pros who serve this zip
    Enter a zip code to view which pros serve this zip.
    There was an issue connecting to the server. Please try again or call Customer Service at 1-877-800-3177.
    We're sorry but the time you have chosen is no longer available.
    Please select a new time below:

    Select your appointment type and time:

    Final Step - Confirm Your Appointment:

    Confirm your appointment with on , - Change


    Required
    Required
    Required
    Required
     
     
     

    By clicking Confirm Appointment, you affirm you have read and agree to the HomeAdvisor Terms & Conditions, and you agree and authorize HomeAdvisor and its affiliates, and their networks of Service Professionals, to deliver marketing calls or texts using automated technology to the number you provided above regarding your project and other home services offers. Consent is not a condition of purchase.