Get matched with top doors (interior) installers and replacers in Canton, IL

"great work and very efficient! would highly recommend!"

Mojo Handyman Services is committed to excellence in every aspect of our business. We uphold a standard of integrity bound by fairness, honesty, and personal responsibility. Our distinction is the quality of service we bring to our customers. Accurate knowledge of our trade combined with ability is what makes us true professionals. Above all, we are watchful of our customers' interests and make their concerns the basis of our business.

"Once this job was complete, there is no way I'm going to hire anybody else to install any interior or exterior doors. These guys were professional, thorough and clean."

"This project consisted of front door and storm door install, including framing and molding. The finished product looks fantastic. We were most pleased by 1) honesty 2) attention to detail and 3) identification of project requirements ahead of time in order to meet or exceed our expectations. The work has been finished for less than 12 hours, and we have already recommended to a neighbor who noticed the activity in our front yard."

"The remodel went great. Joe and his crew were friendly and prompt. They did the work in a timely fashion and were very good at communicating about the project. They did an amazing job transforming our bathroom. They replaced a vanity, walls, put in a tub and tiled. They also laid vinyl flooring and installed lights. We were impressed and thrilled with how quickly they worked and with the finished project. We would hire them again for another renovation. Please check them out."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"David gave me what I thought was a fair price for the work to be done. He asked for 1/2 up front. As a previous small business owner I did not feel this was unreasonable so I paid him 500.00. He estimated the work would take 3 to four days and I thought the same. After several no shows the "mason" showed up. The first clue was he came in a car. According to my wife he was here 2 hours and left, came back for another 2 hours the next day and left again. He said nothing to my wife about leaving or when he would be back. David called a day later to ask about coming out to look over the job and get the rest of the other 500.00. I said he isn't finished and he's only been here 4 hours. So then I looked up the prevailing wage in IL for a mason and found out it is 28.50 an hour. The next day the guy comes back for another 3 hours. David came to look at the work and I walked him around and showed him all of the places that had not been done. So the guy comes back again for about an hour. All told it was 8 hours work, nothing to write home about but it was agreed up front that I wasn't looking for an exposed brick look. I need it tuck pointed well enough so that I could drylock and paint the exposed brick. I will say this was done in the end. The worker left a mess that I and my wife had to clean up, I pointed this out to David as well. I told him I felt he was overly paid for the amount of work preformed and that was the end of it. It's really to bad. It's difficult to get contractors to do small jobs and I had plenty for him to do. I'm not unhappy, just would not hire again"

"They were extremely thorough. They gave us a lot of details and were very patient with all of our questions. I see their name all over town and in our neighborhood."

"We had an exterior door that needed repairing or replacing. With the extend of damage that was likely due to poor workmanship from a previous install, repairing the damage and installing a new door was the outcome. Steve and his brother had their hands full and did a bang up job. We found another problem with gable damage during the initial visit and had that work done also. A keen eye saved us from serious problems down the road. We will definitely have them back for other projects that are on our to do list. Also, not afraid to refer them to friends or family."

"At first I wanted Adam to construct a white vinyl or composite deck. He brought over some samples which were very nice but when I found out that the vinyl deck would be twice the money as a wood deck, I changed my mind. He told me I would be happy with a wood deck and he was right. He built a quality deck in only a couple of days that is sturdy, solid and beautiful. He made two sets of stairs that are also very sturdy with beautiful gates to keep my dog and cats contained. He next put in a dishwasher by cutting out a cabinet. He used the cabinet wood to make moldings around the opening. It fits very nicely. He installed a garbage disposal and thought it should have its own power source from the dishwasher so there would be no blown fuses when I ran both at the same time. After the deck was finished, he put in a fence around the backyard with two gates. He did a fantastic job with the fence. He then cut through the wall in the hall and hollowed out a area to put in a linen closet. He then build the shell of the closet at home, painted it and fit it in to the hole. He finished with the molding and installed a 6 panel door that closed with a magnet. It backs up to another closet which he finished off with a rod and shelf. Overall, I am so pleased with his work. He is a perfectionist and told me to call in a couple of weeks if there was anything at all that I didn't like. He does quality work and I wouldn't think of using anyone else for any future remodeling or new construction. I would also like to add that that his helper, Terry, was great and very knowledgable.
"