Get matched with top doors (interior) installers and replacers in Grand Rapids, MI

"Steven Powell removed and then installed a new folding ladder stairway in my garage to a studio storage area. It was done quicklly, on time at at a fair price. He is well equipted and insureded. Steven offered addional professional services that we will be hireing Powell Home Improvement for in the future."

"Very good job on installing are front door, and cleaned up everything when finished"

All Home Improvement Needs\nKitchen Remodels\nBasement Remodels\nHome Additions and Remodeling \nFlooring\nPlumbing \nElectrical \nWindows \nDoors\nTrim work\nDrywall \nPainting - Interior/Exterior \nRoofing\nSiding\nConcrete \nHandyman service \n

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"Machtemes DBR completed a long punch list of handyman services on my home including soffit construction and gutter repair, heat coil installation for our roof line to address a persistent ice dam issue, porch roof assessment and repair, exterior door installation, finish work including baseboards and trim around windows and doors, and attic insulation. Jon the head contractor showed extensive and wide ra ging knowledge and expertise. His detail work was exceptional. He was able to perform tasks we requested but also was able to troubleshoot problems we didn't know how to solve, suggesting several options for us to consider. The work he did for us has lasted years showing no wear and tear. Would recommend him again."

"Stay-Dry cleaned and fully investigated the extent of the cracks, then filled them with an expanding, permanent bonding material. Their work is fully guaranteed. We are happy with every aspect of Stay Dry's service, heartily recommend them, and will re-hire should additional cracks appear."

"Love the new windows, outside deck,kitchen cupboards and appliances."

"Dan is my go to Handy Man. I've been a client twice now, he knows his trade and his rates are very reasonable. I am quite satisfied with my new home therapy room that doubles as a spare bedroom."

"The replacement of the junction box went just fine - just with some plaster cracking around the box, but that is to be expected in our 100+year old home.  It was nothing the painters we hired couldn't fix when they came through later to paint.  However, the job on the chandelier didn't go exactly as they had planned.  While they were able to secure it properly back to the existing junction box, one of the 12 ornamental glass shades fell to its demise on to the tiled floor.  This was a problem.
I called the manager at Vander Hyde to inquire as to how they deal with cases where the electricians damage the chandeliers they are supposed to be fixing.  I was told that they don't normally damage chandeliers and I would have to wait until he had been able to discuss the situation with the electricians.  And that was my last contact with the manager.  As for the electricians, they told me that it fell after they had stepped outside to get something from their vehicle and therefore they couldn't be blamed for damaging the chandelier.  They then went on to assure me that they could get a replacement shade so not to worry and asked how many I wanted.  I was so happy that we wouldn't have to replace the entire chandelier I told them not to worry about the price of the replacement parts - as long as they got me the parts, all would be well, I would pay for them.
They told me to give them a couple days to get a hold of the replacement parts. ... Well, that has been several months ago.  And still no word from them.  I called several times to Vander Hyde but had no luck.
Hopefully, if they work around expensive chandeliers in your own home - nothing will be accidentally knocked to the floor, because if it does you might end up having to replace the whole thing at your own expense.
This is a pitty.  Because the rest of the work they did was top notch - well, except for the electrical junction box installation which they did a fine job installing.  But, in the process they turned off a water valve within the hidden ceiling in the basement and forgot to turn it back on.  So a day later, I found that our dishes in the dishwasher had food baked on to them because there was no water to clean them.  To fix this they had me pull a bunch of ceiling panels in the basement until I found the valve they had left turned off.  Luckily, nothing was broking in the process - unlike the chandelier.
With all this said - I still really liked the senior electrician who came out.  If it weren't for the lack of follow up on his part and on the manager's regarding the broken chandelier I would use their service again.
"

"After removing all the cabinet doors, they began prepping the outside of the cabinets. And then began cutting and gluing, which is a white laminate, to the outside.  Their application and cutting were very precise and very well done.  All doors and hardware were attached.

Next they proceeded with the countertops.  Since we were not installing granite, just new Formica, they were able the remove the old Formica and then lay the new on the existing base.

They then proceeded to install the new garbage disposal, double sink and faucet set.

The product is holding up very well.  I was a bit leery of going with white, but that's what I wanted, and I am extremely pleased at how easy it is to keep clean.  It still looks brand new!

We have nothing but praise for Sears and their personnel.  The saleslady was extremely helpful in guiding me to make the right choices.  As I said previously, we are also very pleased with the installers.  They would be welcomed into our home for more work if needed.

They did a complete and excellent cleanup, including hauling away the old cabinet doors for disposal.  Overall, I think the job took only two (or three) days.

Overall we are extremely pleased with the job.  Not only has it added value to our home, but it has added value to our enjoyment of our home.  

Price wise, they were over two other estimates.  However, those were individual contractors; we weren't able to check them out. The extra we paid was well worth the security we felt by dealing with a well known company and knowing if a problem occurred, they would make it right.  The difference in the estimates was only about $2,000.00."