Get matched with top doors (interior) installers and replacers in Gulfport, MS

"They were on time and did an excellent job will be calling them to do the rest of my door installation."

"The guys are very nice and professional. They installed a door for me and also replaced my old deck. They did a very good job and the work was completed in a timely manner. I would highly recommend this company and would hire them again if i ever need any more work done."

"Mr. Burns and his helper fixed 2 ceilings that were damaged, also fixed our eaves and soffits that were rotting and our front porch..,,,they worked in the heat and rain.. they did very nice work and we are pleased... Mr. Burns estimated the cost of materials and it came out almost perfect. they also went the extra mile and cut off a privacy fence gate that had been dragging..."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"

"The work crew (2 men) completely removed and replaced all 13 windows in one day. They were clean, neat, and efficient. I recommend this company and their products."

"After removing all the cabinet doors, they began prepping the outside of the cabinets. And then began cutting and gluing, which is a white laminate, to the outside.  Their application and cutting were very precise and very well done.  All doors and hardware were attached.

Next they proceeded with the countertops.  Since we were not installing granite, just new Formica, they were able the remove the old Formica and then lay the new on the existing base.

They then proceeded to install the new garbage disposal, double sink and faucet set.

The product is holding up very well.  I was a bit leery of going with white, but that's what I wanted, and I am extremely pleased at how easy it is to keep clean.  It still looks brand new!

We have nothing but praise for Sears and their personnel.  The saleslady was extremely helpful in guiding me to make the right choices.  As I said previously, we are also very pleased with the installers.  They would be welcomed into our home for more work if needed.

They did a complete and excellent cleanup, including hauling away the old cabinet doors for disposal.  Overall, I think the job took only two (or three) days.

Overall we are extremely pleased with the job.  Not only has it added value to our home, but it has added value to our enjoyment of our home.  

Price wise, they were over two other estimates.  However, those were individual contractors; we weren't able to check them out. The extra we paid was well worth the security we felt by dealing with a well known company and knowing if a problem occurred, they would make it right.  The difference in the estimates was only about $2,000.00."

"Luke is extremely professional and the service that he provided was timely and well done. He communicates well and we always knew when our work was going to start and finish. Afterwards he communicated with us concerning the job and whether or not we had any concerns or were pleased with the job. If we had had some issues he would have immediately come to fix them but we were very satisfied with the job. I would recommend Luke’s service to anybody."

At Level Up Construction Company we take our work to a whole new level! We are a family based company and We do our very best to make our customers dream home/yard become a reality! We have a wide variety of projects that we can complete for you such as decks(with custom built handrails etc upon request), fences, trim jobs, and much more! We can even refurbish and remodel from power washing to custom built French doors. Call us today for a free estimate, you won't be disappointed (251)591-8941

"First step was to pressure wash the second floor (exterior) of my house to remove the loose paint.  The chipped areas were then sanded to help feather in the rough edges.  Oil based primer was applied.  Then a top coat was added.  Facial board and eaves were painted a different color as well as shutters.  Site clean-up was excellent.
"

"The quality of work and customer service regarding the install of my two exterior doors was exceptional."