Get matched with top doors (exterior) installers and replacers in Karnes City, TX

West Shore Home offers a risk-free home improvement experience, so you never have to worry that you are sacrificing on quality, convenience, or expertise. We specialize in shower and bath replacements, and walk-in tubs. We offer fully customizable, limited lifetime-guaranteed solutions installed in as little as one-day. All of our installers are in-house employees, so we can guarantee the quality of the whole project from start to finish. We get it done the way you want - fast, easy, smart and right.\n

"Biggins did an outstanding job on a door I thought may need to be replaced as a result of years of sun beaten wear and tear. They made my door look far better than it did the day I purchased my home. Its been just a day and I’ve already had a couple of neighbors ask who did my door. I couldn’t have asked for better folks at Biggins and service. Thank you."

"They came - put up an non-opening replacement door - took my old door away - and when it came back looked like new! The leaded glass had a 'bracing bar' where the solder had broken - so, they rebuilt the leaded glass in the door (looks better than it did new)... Also, the hardware (dead bolt - latch/knob) had lost its finish due to the sun... - they also allowed me to pick out a new hardware set and put that on also... (extra charge of course... and the leaded glass repair was extra - I'm very, very pleased with the result! :-)"

"San Antonio's Choice Overhead Garage Door Repair did a great job."

"I have hired Bill Clark on two different occasions to replace my roof due to hail damage. I can truly say that any time I need a roof done I'll call Bill. He does the job right the first time. I trust Bill with all my roofing projects 100%. I have never had any problems with the roofs he has put on my home. I can rely that the job is done right the first time."

"We have been a customer of Precision Garage Door for several years, both in San Marcos and now San Antonio, and we’re always very pleased with the products and services. Our latest transaction with Precision was to replace an old garage door (we had already replaced the opener with Precision a couple of years ago). I started on the website to take a look at the general styles and options for the doors. The website is very helpful as a starting point: I got to “test drive” different doors in different colors and against different exterior siding to get a good idea of what the doors looked like. For the appointment to get a quote and order the door, Jason Dawson was great to work with. He was very thorough and listened well. He mentioned different options that I might be interested in and was very knowledgeable about the products. The door installation was performed by Ronnie Garcez, who did a great job! Ronnie is very personable and knowledgeable. He took time to make sure everything was working properly before he left, and thoroughly answered any questions that I had. The door itself exceeded our expectations – it’s even more good-looking than I had anticipated. We had insulation added to the door and are impressed by the clean and sturdy way it is installed. The door opens and closes so smoothly and quietly, we love it."

"The quality of the work was absolutely first rate. Hector and his crew were professional, meticulous and very responsive to my requests. They took impressive care with their work and did not rush through or cut corners. They carefully masked windows, etc and covered all things that might get paint on them. There was no paint mess anywhere. Paint edge lines were crisp and perfect. They applied two separate full coats per the contract. The finished product looks great. Most importantly there were NO surprises. Charlie was very helpful in describing the process, answering my questions and aiding me in selecting the appropriate Sherwin Williams paint line. I was very impressed with his approach for achieving a long lasting, nice looking paint finish on stucco."

"This was a two-step project. First the carpenters removed the old gutters, replaced the bad wood, sealed the painted the area. Then the gutter specialist came out. He fabricated and installed the new guttering on-site. The workers were fast, efficient and totally professional. Expansion of project scope was quickly acknowledged and incorporated without hesitation. Truly excellent customer service."

"Great Company! The complex project went perfect. Tony followed progress very closely and made sure everything was done according to plan and made several requested changes to improve the work at no extra cost. Something other contractors would try to get extra money out of you for the changes. Tony is honest almost to a fault. He keeps his word and a pleasure to work with. I highly recommend Tx Outdoor Escapes if you want a professional job done at a reasonable price, completed in a timely manner."

"Hello, My name is Phil Carr-Jones, I am reviewing my experience of working with and building my own kitchen, using cabinets and doors from Arkansas Wood Door. While I am an Episcopal Priest, it turns out I get to do a lot of things they don't teach you in seminary. Over the years, I have had to get fairly skilled in all the trades, including, no surprise, carpentry. But I am by no means an expert. For instance, I employed a retired carpenter to help out with the crown molding and other trim. Apart from that though, this is all my and my wife's work. So let me state up front, Arkansas Wood Doors is the go to place for the DIY’er who is thinking of remodeling their own kitchen. Here's why: I searched the web for months, literally doing comparisons and research on flat pack rta cabinets. I went to the big box store for a design and pricing in their three lines of cabinets, and I went in for a consult with a small custom shop in my area. Here's what I found. 99 outof 100 rta cabinet companies have their product made in china which means the standards for formaldehyde are going to be as fishy as they smell, plus you can only get cabinets in fixed sizes so if you looking to eeck out every last inch of space you're going to lose a lot and you'll be using a lot of filler strips wasting what could have been useful storage. If you want to go custom, then you only have less than a handful of online options, companies that will make to order in any dimension. For instance, I only wanted an 8 inches deep spice cabinet to allow for greater working room over the counter. My wife and I are pretty serious about cooking from pastries to mains and sides. We want a very serious kitchen. Plus, I'll tall so I needed the room. In any case, if you want something custom your choices online are limited. The big box stores don't really do custom and are just as limited in their options as are the online rta places. Most online rtas offer far cheaply made boxes with construction methods less sturdy. I have found that if I buy cheap, I shouldnt expect my kitchen to hold up past a few years. The finish will fade. The drawers will warp. The joints will open up. The big box stores basically offer the same thing, too. When I go to a big box store to buy something, I do it knowing I probably willl get a year out of it, whether that’s a lawn chair of a power tool. I mean when was the last time you regretting spending too much money on a better grade of power tool? So if you want quality, a better and safer grade building material and much wider choices in sizing then your basically down to three or four options. I went with Arkansas Wood Door and am completely pleased and impressed by the experience. Now I could have spent twice what I did and gone to a small custom shop and gotten the same thing, but I am in to saving money and frankly I enjoy the challenge. AWD worked with me directly. Working up the order and getting the plan for each box just right. If you have never designed and built a kitchen before, there are plenty of tips and guidance on the web and I recommend you heartily research all of the aspects and complications involved. I hit a couple of unexpected bumps. But more about that below. So do your research. For instance you can save a lot of money by building the plinths yourself and only order squared off boxes without the toe kick. By making the platform on which you place the lower cabinets first, you can get that plumb and level, so throwing up the boxes is a breeze. And again, the cabinets are also less expense, a complete all around win. AWD uses an easy system for matching up box parts so assembly was easy. No special tools required. Given the many parts and I used a mix of frameless and face framed cabinets, there was a moment or two when in amongst all the materials I got nervous about having everything I needed, but low and behold, all was right there in the end. I also recommend the concept from French cooking "mis en place" that is have all your ingredients in place and all your tools where you need them before starting out. Also, it was a lot easier to work with my wife than doing it alone, but I did a few by myself and so if that is your only option than you should have no problem. I've assembled a lot of cheaper Swedish flat packed furniture in my day, and the quality and sturdiness of AWD leaves no doubt about how long these will last. Just rock solid. Great thing about AWD is the cost to quality ratio. Cant beat it. Which also means if you make a mistake the replacement is so reasonable it becomes not big deal. I mis-measured one box and so I needed to order the right size. Worked out fine, but that was because AWD had an incredibly fast turn around. The other few reliable companies are several weeks to months. And these other places are crazy expensive. And in truth, the other companies are a complete rip off on trim and accessories. AWD pricing was so amenable that my mistakes cost me so little in comparison with what I was saving. So there's a built in confidence for the first timer. Also AWD made one mistake on the placement of a hinge in two doors. They immediately and without question remade them and sent them out in under ten days. You just can't get that service anywhere in the custom cabinet world. It was so affordable I upgraded on one side to black walnut. Trying doing that at the other quality shops. The quality of the roll out drawers and top drawer boxes is superb and the hinges and under-mount sliders are top grade excellent. The hardware was the easiest part frankly. Their system, for lining up the hardware is just so easy. Drill driver is all you need as the placement is already leveled for you. SO: high end quality custom built cabinets, superior custom support, fastest turnaround in the marketplace, most affordable pricing out there, excellent hardware, and oh yeah, I almost forget, color choices. They offer complete line of lacquer - just pick a SW color and they'll match it. SO completely and truly custom for a fraction of cost without sacrificing any quality. The Rev. Philip Carr-Jones"