Get matched with top chimney cap installers and replacers in Milledgeville, GA

"Roots from a large tree had damaged a brick wall, a concrete pad, and the corner of a hangar. Pete surveyed the project and provided counsel on how to proceed. We chose to reconfigure the wall and save the tree. Pete's part of the project was to replace the brick wall. The wall is beautiful - better and stronger than the original. Pete is a consummate craftsman with a driving work ethic. We are happy to know him."

"Very professional team, thorough cleaning and extremely tidy."

"The team did a great job of giving an extremely competitive price and then doing a quality job of installing the gutters."

"Several years ago I used T&J Exteriors to replace 3 or 4 windows on a recently purchased home, so I contacted them again when I decided to replace the rest. My first experience was great; the owner met with me to determine what I needed and to answer questions. After the installation, he called to make sure I was happy with the product and service. My second experience was different; I had to leave a few messages before I heard back from the owner. He told me that he subcontracted out all his window jobs, saying someone would be out to measure. The man who did the measuring and the man who actually installed my windows were professional and competent, and I love the quality the windows. After the job was completed I did not contacted by the anyone to see if I was satisfied, but about a week later I got a call asking for payment. Maybe I am just old school but I believe spending more than $5,000 with a company entitles me to at least a "thank you for your business"."

"Schedule for start September 5th. Started the morning of the 5th of September and everything looks great. They left an opening for the roofers to access so as to not to damage installed gutters. Awaiting Cannon Gutters to return to finish job. I want it to rain to check their work but they haven't finished that one small section."

"I received a quote from Ramjack and then Engineered solutions. Engineered solutions quoted a need for 3 piers instead of 4 per Ramjack quote. I decided to use engineered solutions because they looked at the level of my floors inside my house and the piers were to be installed on the outside of the house and not the inside of my basement (per Ramjack). We were scheduled for 8/8/2019 but the gas lines were not marked yet so the date was reset for 8/12. Unfortunately the truck needed work and they arrived at 1100 a.m. They dug the 3 holes and placed one pier until the desired pressure and left at 4pm and planned to come back the following day. They arrived back on 8/13 at 0940 and finished the job that day. The men who installed the piers were professional, explained the process, did not mind my intermittent observations of the work and answered all of my questions. They then left the job site as clean as someone could after using a tractor and covered the site with the dirt. They did this in 93-95 degree heat too. My completed job was $2,212 more than expected because my piers went beyond 21 ft, which is what is quoted. My job required an extra 79 ft. of piers to ensure proper depth/pressure for stabilization. Engineered solutions charges $28.00 per foot beyond 21ft and Ramjack is $32.00 beyond 25ft. The extra costs is mentioned in contracts, so READ your contracts. If I compared total cost with extra feet on 3 piers with Ramjack vs Engineered solutions, engineered solutions was $400 cheaper. I would use Engineered solutions again and would recommend them."

"Superb! He sent two of his crew over and they completed the repairs in the same day. All three of the repairs were taken care of and none leaked again."

"Very happy. No more leaks."

"Mr. Mimbs responded to my service request within five minutes. He arrived at my home the next day and completed the repair to my roof within 1 hour. He was very efficient and courteous. If I could give his company an A+ I would do so. Will definitely use him again. <br />"

"The first unit was delivered in a timely manner. However, the carrier did not adhere to the shippers warnings about product fragility and the unit was received in a damaged state. The unit was sent back to Classic Copperworks for repair.  The repair was treated as a priority by Mr. Threadgill, who had the unit shipped back to me in three weeks. It arrived in good condition that time. <br /> Mr Threadgill was very helpful in providing support in order to finish our project. He even had a caulking product sent to us in order to help with flashing the unit. That meant alot. <br /> I am not a professional contractor, but was able to install the unit myself with his support. However, my profession does provide me the opportunity to serve the public and as such, I feel that I am more than qualified in commenting on good service. While Classic Copperworks may not be the cheapest provider of goods and services, they stand behind their product and provide great support. It requiress a "leap of faith" to order an expensive unit from an out-of-state provider with no prior mutual history, but I can attest to my complete satisfaction. <br /> WRS <br /> <br />"