Get matched with top chimney cap installers and replacers in North Grosvenordale, CT

"They came in on time, and they told me what they were gonna do when doing estimate. They are very accommodating. They do a good clean up."

"These guys are awesome, hands down. They came to my house quickly and did a full inspection and quote the same day. Started work two weeks later and rebuilt both of my crumbling chimneys beautifully. Nelson, Kevin, Segundo, and Carlos - you are all excellent!"

"I found everyone at Riteway Chimney to be of the highest professional caliber. Our fuel oil company recommended Riteway Chimney to reline our furnace chimney prior to installation of a new furnace. That recommendation was perfect because the dealing with both the office and the installation crew went very well. A very professional, pleasant, and efficient company."

"Came the first time cleaned the chimney with brush and vacuumed did not observe. The next day I went up on the roof and cleaned the metal cap noticed that the tiles were not clean and scrapped the tile with the small brush I had. looked further down the chimney and noticed that there was still black particles on the chimney, so I thought that the person did clean all the way to the top. Called them back and had him go up the roof to reclean this time. I talked with him and asked if he cleaned the tile clean he indicated that he just brushes the chimney and not cleans the chimney. Cleaning and brushing are total different. So I suggest that they indicate that when someone wants their chimney cleaned or brushed when quoting prices. I also vacuumed the shelf above the fireplace after the second cleaning and retrieved about a quart of creosote. I did not want him to vacum"

"At the beginning it seemed that Chimney USA would have the expertise to complete the work well. There were some waiting on parts, that wasn’t a big problem at the time because I wanted it done right. The estimate listed that they would remove the front stone work to be able to get to the steel box fire box for removal and install new steel firebox, then replace all the stone work. Neither one of these parts was done. The 4 metal vents weren’t removed and replaced, the ash door was not installed. There seemed to be a problem figuring out how to get the steel firebox manufactured and to have it installed. The steel firebox was needed so that the side heating vents in the fireplace would work to bring heat into the room. As time went on, there was no resolution to get the firebox and install it. Very frustrating. I finally made the decision to just build the firebox using firebrick. This was a mistake now because there is no exchange of heat for the room vents now. We agreed to have grey firebrick and they installed a grey “cement” (not a fire brick and wouldn’t stand up for the heat of a fire) brick and the installation wasn’t complete to seal off the firebox. The masons didn’t seem to know what they were doing. This would mean that smoke would fill the room. I texted, sent photos, and sent a video of the issues and Chimney USA decided to send their masons back out the next day to fix this problem. This time they didn’t have the grey firebrick, but only red firebrick. They removed the grey “concrete” bricks and installed the red firebricks. None of the workers spoke English which made communication difficult. They had to use a translation app on their phone to communicate with each other. The masons didn’t understand that the firebox had to be completely sealed off so smoke wouldn’t enter the room. Finally, that firebox was complete, but not what I was expecting. The ash door was never found to fit my opening and never installed. The rock face removal and steel firebox was never completed. Those costs were far more expensive than just building the brick firebox. Their cost for the custom stone removal and install of the face of my fireplace was estimated at $3,200 and the steel firebox with damper was estimated at $2,135. Total of $5,335. This was taken off Angi on what it should have cost just to do what they did which was to remove the steel firebox and build a brick firebox. “How Much Does Firebox Repair or Replacement Cost? [2024 Data] Normal range: $160 - $750 Firebox repair or replacement costs $455 on average, but it can cost between $160 and $750, depending on the project's scope and details.” Based on this I’m being charge almost $5,000 for work not complete. This should have been adjusted based on the work complete and the estimate scaled down to represent the job completed. They want me to pay the whole original estimate. I contacted Chimney USA to say that the bill needed to be updated with a lessor amount based on the final work, but they didn’t respond, except to keep sending me the same estimate bill to be paid in full."

"very well and very professional"

"Gunner Roofing We used Gunner to replace shingles. They told us that if we upgraded the skylight to one that is solar powered we would get a tax credit of 30% of the entire job, a savings of over $2000. We weren't planning to replace the skylight but the numbers made sense. When we filed our taxes for that year we learned that the skylight they used did NOT qualify for the tax credit. They mislead us to spending an extra $2,500 on the job. When I called to complain I left a message but no one ever returned my call. This is after they didn't do a good job on the roof and it took them months to come back and fix the leaks they caused. STAY AWAY!! Show less"

We are a small family owned and operated chimney service business located in Southeastern CT. We have been building, maintaining and repairing chimneys and fireplaces for 40 years. We also install and service wood and pellet stoves, offering annual cleaning and maintenance. With myself and my 2 sons Jeremy & Josh, there is an Armstrong on every job being done, to assure your Family's safety and satisfaction.

All estimates include a written condition report free of charge done on the spot,by the owner of Coastal Chimney and Masonry.All work is done by owner. \n

Additional DBAs - LaBrosse Chimney/ Chimney Wise. Additional email - john@labrossechimney.com