Get matched with top built in furniture constructers in your area

"Quality work for a good price and creative."

"Horrible experience. Mr. Cattani started out like a professional -- but then proved to be highly unreliable. We were subjected to cancellations, unkept promises, no communication, and no work done on our job after 4 months of waiting He gave us a quote for a simple one-day job on June 17 and, after getting one more estimate, we agreed to his offer. It is now the end of October, and Mr. Cattani has not found the time to get to us. He cancelled twice, the first time for a family issue and the second because he got shingles. We understood both times, and we were okay with him needing 2 weeks to get well. After 4 weeks and no word from him, we emailed. He said he was back to work and would contact us next week to reschedule. He lied. When we contacted him, he said he had a family issue and work-related problems but that he would get to us in a week or two. He also said: I completely understand if you choose not to use me but would still love to earn your business. So we decided to give him another chance. Well, he did not get in touch and he did nothing to earn our business After waiting and waiting for him to respond, we emailed, requesting a firm date. No answer. We sent a last email to cancel the job. Not a peep. If our job was too small and he preferred bigger, more lucrative jobs, then he should have told us to try someone else. Caveat emptor!"

"I’ve been a customer of Wilber’s for several years. Up till now I’ve always found them to be reasonable in price, professional, reliable and trustworthy. I don’t know what’s happened but, they are no longer the company they used to be. I recently hired Wilbers to repair a loose newel post at the bottom of my stairs. When Danny the estimator came he explained that it might be an easy fix or more involved if they needed to install a new 4X4 interior post. Though I requested that he provide estimates for both scenarios he only sent the estimate for the worst case scenario. I let that go because I trusted that they would do the right thing should it prove to be an easy fix. When they arrived it turned out that all that was needed was to replace the wooden board in the basement with a 2 ft. 2x4 and tighten the bolt that runs inside the post. The workers were here for 1 hour and for this Wilber’s decided that a fair price was $820. It seemed absolutely outrageous to me that they would charge me $820 to tighten a bolt so I tried reaching out to Wilber 3 times and asked that he call me back to discuss. Well he never called me back. I can only assume that he knows full well that he did is wrong and is unable to justify his outrageous pricing. It’s sad that Wilber thinks this is how you should treat a loyal customer and it’s certainly disappointing to discover what an unprofessional and unethical person he is. I certainly will never utilize the services of Wilbers ever again and I would caution anyone thinking of hiring them to think twice. Wilber is a man that lacks integrity and therefore someone you cannot trust to do business with."

"they are very good, quick and very professional and the price was very reasonable. 100 cars parking garage walls,"

"Donald is professional, courteous, and gets the job done. He assisted with the purchase and installed an excellent storm door and it has done wonders to bring an end to drafts as well as preserve the door frame from inclement weather. Great Job!"

"This is the second time. We have had Sean do work on our house. He is the best. Always on time. Clean and efficient work. Jobs well done. Would highly recommend. We are having him. Come back for more work ."

"Alex Matos did a wonderful job at our house! He gave a reasonable quote, took lots of measurements on his visit and made me feel like he knew what he was doing. He designed the railings himself and did a wonderful job making and installing them. The railings are very sturdy! I highly recommend Alex Matos."

"I have been a customer/consumer for many years. The products are manufactured to the very highest quality possible. Packing & shipping are the Industry Standards. Customer Service is the benchmark of the business. Every company should use J Display Case as their Business Model ! Kudos !!!"

"This past weekend I had a bad experience. The short story is that an A. J. Perri technician diagnosed my furnace problem and wrote me an estimate for $1,600, parts and labor. It turns out my furnace had a different problem that required no parts and only 15 minutes of labor. Here are the details: This past Saturday my furnace stopped heating my home. I called A.J. Perri and they sent out a technician on Sunday morning. The tech ran some checks and concluded that my “inducer assembly” had to be replaced. Parts and installation would be $1,600. He said someone from the office would contact me on Monday and let me know when they could have the part. He also said that he couldn't be certain that there weren't other issues that wouldn't be found until the inducer was repaired. After the technician left I did some searching on the Internet. YouTube and Reddit were especially helpful. I discovered that the problem was that the condensate drain was clogged and water had backed up into the inducer assembly. The water prevented the pressure switches from detecting that the inducer was running and this prevented the furnace from starting. When I disconnected the condensate hose *2 quarts* of water drained out of the inducer assembly! This water was supposed to drain into a small pump unit on the floor that sends collected water to the sump. Over the years mold and algae had clogged the condensate trap and caused the backup. I disconnected all the hoses and removed the trap. I blew out the trap (making a mess) and confirmed that water would easily flow through it. I put it all back together and the furnace is working fine. The sad lesson here is that you can’t always rely on supposed experts. The good news is that the Internet can be your friend. Even more details: The original symptom was that the furnace would start up, the inducer motor would run for about 20 seconds and then it would shut off. This cycle would repeat every few minutes. Every few hours the furnace completed the startup cycle and then I’d get heat. Then it would stop heating for hours, and the indoor temperature would drop to the low 60s. What I learned from YouTube is that there are multiple stages for furnace startup. The inducer motor spins a cage that sucks in fresh air for combustion, and then pushes the hot gases through the heat exchanger and out the flue. Each stage in the startup has safety checks. The furnace will not ignite if the pressure sensors don’t detect that the inducer motor is working properly. Water is a byproduct of the combustion. It starts as a vapor but then condenses in the flue pipe and drains back to the inducer assembly, where it’s supposed to run through a hose to a pump that sends it over to my basement sump. The furnace is 14 years old. Apparently that’s long enough for mold and algae to clog the condensate trap and cause water to back up into the inducer. The 2 qts of water blocked the pressure sensor switches and so the furnace wouldn’t light. Final thoughts: For over 14 years I've had great experiences with A.J. Perri. They replaced my home’s original furnace and Air Conditioner units. They moved our outside A/C unit to the side of our house so we could have more quiet in the backyard. I had them come for periodic heating and A/C maintenance checkups. My impression is that they might cost a bit more, but they were reliable. I'm saddened that I need to post such a negative review."